Lubes/Cleaners

For a clean, smooth-pedaling drivetrain, look no further than Finish Line's Ceramic Wax Lubricant. Its ceramic bonding technology allows you to greatly extend your re-lubing intervals for maximum durability and convenience. In fact, every time you apply the lube, it builds on the ceramic coating and the result is a chain so slippery even dirt has a hard time sticking! Think efficient. Think quiet. Think Finish Line! - With each application the ceramic coating is enhanced, ultimately providing the durability of many oil-based lubricants - No wetness or stickiness so dirt and grime will not be attracted or absorbed by the lubricant - Helps avoid abrasive wear allowing parts to run more smoothly and last longer - As the white ceramic particles embed themselves on the chain they will displace grime, causing a grey or black film to form on top of the wax coating. Over 2-3 applications this will lessen or cease. This discoloration is normal and will not compromise performance.

Finish Line's Ceramic Wet Lubricant provides outstanding protection for your drivetrain in even the nastiest conditions. Its ceramic bonding technology allows you to greatly extend your re-lubing intervals so you can spend more time riding and less time on routine maintenance. In fact, every time you apply the lube, it builds on the ceramic coating and the result is a chain so slippery even dirt has a hard time sticking! Think efficient. Think quiet. Think Finish Line!

Finish Line Citrus Degreaser. Super strong and fast. Cuts through the toughest of carbonized grit, grease, and grime. Low surface tension for thorough penetration into all areas. 100% active, biodegradable and nontoxic.

Reach for Finish Line's Citrus Degreaser when you've got tough grit and grime to cut through. Your parts clean up fast and then rinse residue-free with water. This degreaser is concentrated and water soluble so you can dilute it with up to 25 parts water for less difficult jobs. It's 100% biodegradable and completely non-toxic, too.

Finish Line's Dry Lubricant with Teflon keeps your bike running silky-smooth rain or shine. It's very thin yet extremely durable thanks to its synthetic oils and Teflon particles. Great for your chain, cables, cleats and springs, its dry surface texture minimizes the accumulation of dirt and grit. Plus, it's biodegradable. - Great for dry, dirty and dusty environments. Attracts less grime and runs clean - Holds up well in moderately wet conditions - Can be used on derailleurs, shifters, cables and brake pivot points - Finish Line's most popular and versatile lubricant

E-Bike Chain Lube is designed to handle the unique requirements of electronic assist bicycles. E-Bike chains are exposed to higher torque and wattage loads. With this in mind, Finish Line engineered a light wet lube with unique extreme pressure additives to ensure that the lube stays within the premature wear and protecting against rust and corrosion. Finish Line’s E-Bike Chain Lube is an ideal complement to any dealer specializing in e-Bike sales and service.

- A biodegradable degreaser that cuts through the toughest grime - Strong enough for the metal parts, Yet safe enough to clean parts with rubber o-rings and seals, urethane elastomers, and painted surfaces - Exceeds all federal V.O.C. and California carbon regulations - Law prohibits ORM-D materials from shipping by air

Finish Line's Mineral Oil Brake Fluid is high quality to provide maximum fluid life and braking power. It features a super-low viscosity to yield superior lever response and pad retraction. Plus, it won't foam up even on long, challenging downhills.

Lubing your bicycle's chain is an essential but messy task. But now, thanks to Finish Line's No Drip Chain Luber, you can oil your chain perfectly without making a mess. Just add your preferred chain lubricant (sold separately) and you'll have your chain lubed in just seconds flat. Not only does it keep things tidy, it saves you chain oil, making sure that not a drop is wasted.

Clipless pedals require regular maintenance for optimum performance and longevity. Finish Line's Pedal and Cleat Lubricant sprays on to fully and evenly coat all frictional surfaces and is engineered to ensure you click in and out of your pedals quickly, easily and smoothly every time. It also helps prevent creaks and squeaks from the pedal/cleat interface. Plus, thanks to a 100% dry-to-the-touch (in seconds) micro-thin coating, there is no oily, greasy film. So, it's safe to walk around on floors in your cycling shoes. Finish Line's Cleat and Pedal Lubricant was designed in conjunction with the pedal experts at Speedplay.

Finish Line's Premium Grease With Teflon is a race-proven lubricant formulated for the unique demands of bicycle bearings. It's exceptionally strong and thick, it doesn't separate and it repels water even when submerged. Rated "5 Chainrings, Exceptional Grease" by Bicycling Magazine, it's very slick and very tough and lasts as much as 5 times longer than petroleum grease.

- A super duty cleaner that strips the toughest residues, Including brake rotor surface grime - Dries fast with no oily residue left behind - Exceeds all federal v.O.C. And california carb regulations - Law prohibits orm-D materials from shipping by air

The great thing about wax-type lubes is that the shedding action of wax keeps parts cleaner during most riding conditions. Finish Line's Wax Lubricant is a unique formulation that features DuPont's Krytox, a highly advanced, thermally stable lubricant. Its specialized paraffin waxes set up dry and hard to repel grit and grime so your drivetrain runs silky-smooth and stays clean.

For extreme conditions, you need an extreme lube. That's when you grab Finish Line's Wet Lubricant. It's ultra water-resistant and long-lasting thanks to its special formulation of synthetic oils, special polymers and anti-wear additives. This lube delivers superb drivetrain lubrication and protection and it's the ultimate choice for muddy off-road rides, all-day epics and long, rainy commutes. - Formulated with high viscosity synthetic oils, water repelling polymers, and advanced anti-wear additives - Will require more attention to drivetrain cleanliness, but delivers the ultimate in lubricity and protection - Upon application, wipe excess off chain to minimize attraction of dirt and grime - Finish Line's Wet Lubricant delivers the ultimate in lubricity and protection. It requires a little more attention to drivetrain cleanliness compared to Finish Line's Dry or Wax lubes.

10 Weight Green Damper Fluid For rebuild and repair of Fox suspension. - 10 weight, 32oz bottle

Recommended by DT Swiss for lubrication of star-ratchets on all DT Swiss hubs. - Molykote tp 42 with 5% mineral oil added to mixture

Bow Lube is Back! Designed and made in Canada by GoBig Oil GoBig Oil/Bow Lube is specially formulated for bicycles. As passionate cyclists and lubrication specialists we know what we want from a chain lube. Starting with the highest quality base fluid results in the purest oil for your bike. Not all base fluids are refined equally. A lower quality fluid could still contain petroleum products that will eventually create gummy build up on chains, derailleur wheels, and cogsets. Next we put chemistry to work, preventing moisture from affecting functionality. We have also added rust and corrosion inhibitors, extreme pressure agents, friction modifiers, and anti-oxidation additives to ensure your expensive components will last through all of Mother Nature’s elements. This is without a doubt the most fully formulated chain oil in the world. For your two wheeled best friend, nothing less will do.

Zipp's Bearing Grease is perfect for your home workshop and traveling toolbox, too. It's a quality lubricant designed to minimize friction and maximize the life of your components. And it's easy to apply with its 20ml syringe container.

- WT-G Precision Bike Grease is a waterproof, synthetic oil-based lubricant for cycling specific applications - Reduces friction on moving components while protecting them from contaminants, water, and corrosion - Maintains low viscosity for consistent performance from -60ºF to 360ºF (roughly -50ºC to -180ºC) in all conditions - Creates smooth, easy component movement for low energy loss - Long-lasting lubrication for extended bearing and component life - High resistance to oxidation and corrosion - Can be used on steel, alloy, Carbon, and titanium

- All seasons, all-conditions lube - Rust prevention formula protects chain from rust - No WAX buildup

- Biodegradable foaming wash that is easy-to-use and powerful enough to remove embedded grease and grime. - Prevents component wear, damage and surface scratching. - Safe for use on all bike surfaces including carbon fiber, titanium, chrome, aluminum, rubber and plastics.

- Safely dissolves and removes grease from frames and drivetrains - Thick biodegradable, non citrus based formula is safe for carbon fiber, titanium, aluminum, steel, chrome, rubber or plastic - Specifically developed for bicycles

- For dry riding conditions - Will not freeze in cold weather - Goes on wet, special polymers form a long-lasting dry film to protect your chain and repel dirt in arid or dusty conditions. - Does not contain wax - Specifically developed for bicycles

WD-40's Wet Lube is the perfect bicycle lubricant for riding in wet and muddy conditions. Their exclusive formula has been tested and proven by mechanics and cyclists and is amped up for premium lubrication. Wet Lube improves shifting and extends the life of your chain and drivetrain components by repelling moisture and gunk. - For extreme wet and muddy riding conditions. Works well in winter conditions as well (handles cold well) - Improves shifting and extends chain life by repelling moisture and gunk - Goes on wet, stays wet - Does not contain wax - Specifically developed for bicycles and thoroughly tested by WD-40 scientists in partnership with IBDs, pro bike mechanics, and pro cyclists

- Includes all the parts and tools needed, just add mineral oil - Hose cutter - Two premium syringes with thread on hoses - Bleed port adaptors - Bleed blocks of 2, and 4 piston calipers - Assortment of compression nuts, olives and barbs

- For hydraulic braking systems - Non-corrosive mineral oil - Excellent heat managment properties - Volumes : 50ml or 1000ml

- For all TRP and Tektro hydraulic braking systems - Non-corrosive mineral oil - Increased Boiling point to 270 degrees C - Decreased viscosity for better fluid flow

SRAM's Ceramic Bearing Grease is perfect for maintaining your SRAM components that feature ceramic bearings. This high-tech lubricant minimizes friction to maximize your performance and it keeps your SRAM components going strong year after year. Plus, the 10ml syringe container makes it easy to grease your parts, too.

SRAM'S Jonnisnot Shifter Grease is a fluorocarbon lube perfect for steel-on-composite applications and for brake and shift cables. It minimizes friction and maximizes the performance of your components. You'll love the easy-to-use 20ml syringe container, too.

- Pro bleed kit for mineral oil brakes - Includes 2 syringes/2 M4 fittings, bleed block, Torx tool, crowfoot