Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts

3T Superergo Team
$478.99
3T started life as a master drop bar manufacturer. Nobody else had the same technical ability to manipulate tubing, and thus 3T became the first company to focus on more ergonomic (i.e. more complex) shapes. That focus continues to this day, now with the complete shape freedom of carbon. The previous generation, the Ergonova, was lauded worldwide as the top ergonomic bar, in fact, it was so good we didn’t touch the center section at all when designing the new SuperErgo. We did change everything else though, ensuring the SuperErgo will continue 3T’s streak as the ergo bar of choice for road cyclists from beginners to Team BMC and Team Aqua Blue. - Material: Unidirectional carbon - Cable routing: Internal cable channels - Stem torque: 5Nm maximum - Shift/brake lever torque: 8Nm maximum - Clip-ons: Not compatible - Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A
3T Superergo Team Stealth
$495.99
Since its introduction, the most common feedback on our Ergonova drop bar was “don’t change a thing”. But observing how our customers ride, we noticed many spend considerable time holding the bars in the corner section, especially while climbing. Designing the corners specifically for this function has created a bar that is supremely comfortable not only on the tops and the drops, but also in this intermediate position. Further redesigns to the hood and drop shapes to accommodate the latest shift/brake levers help to create the new standard in ergonomics - Material: Unidirectional carbon - Cable routing: Internal cable channels - Stem torque: 5Nm maximum - Shift/brake lever torque: 8Nm maximum - Clip-ons: Not compatible - Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A
3T Superleggera Team Stealth
$495.99
Superleggera, the lightest 3T drop bar ever also offers classic good looks. The new constant-taper center section creates a more structurally efficient shape (lighter, stiffer) and a remarkably comfortable hand support despite visually fitting within the classic dimensions of a drop bar. The drops use a classic round shape favored by traditionalists and many pro racers. - Constant-taper center section & traditional round drops - Weight: 186g - Material: Unidirectional carbon - Cable routing: Internal cable channels - Stem torque: 5Nm maximum - Shift/brake lever torque: 8Nm maximum - Clip-ons: Not compatible - Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A
3T Sphinx LTD
$499.99
3T designed their endurance track racing handlebar, the Sphinx LTD, for off-the-front efforts. Shaping and aerodynamics are the themes here, with reinforced high-modulus carbon fiber used throughout to achieve awesome responsiveness and superior aerodynamics. The tops are aerodynamically shaped for a speed advantage on the boards. Your hands will love the specially shaped "wingtips" that give you an ergonomically efficient area to hold on to when you're taking a lap on the competition.
3T Superergo LTD Stealth
$574.99
Since its introduction, the most common feedback on our Ergonova dropbar was “don’t change a thing”. But observing how our customers ride, we noticed many spend considerable time holding the bars in the corner section, especially while climbing. Designing the corners specifically for this function has created a bar that is supremely comfortable not only on the tops and the drops, but also in this intermediate position. Further redesigns to the hood and drop shapes to accommodate the latest shift/brake levers help to create the new standard in ergonomics - Material: Unidirectional carbon - ultralight layup - Cable routing: Internal cable channels - Stem torque: 5Nm maximum - Shift/brake lever torque: 8Nm maximum - Clip-ons: Not compatible - Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A
3T Superleggera LTD Stealth
$574.99
Superleggera, the lightest 3T drop bar ever also offers classic good looks. The new constant-taper center section creates a more structurally efficient shape (lighter, stiffer) and a remarkably comfortable hand support despite visually fitting within the classic dimensions of a drop bar. The drops use a classic round shape favored by traditionalists and many pro racers. - Constant-taper center section & traditional round drops - Weight: 166g - Material: Unidirectional carbon - ultralight layup - Cable routing: Internal cable channels - Stem torque: 5Nm maximum - Shift/brake lever torque: 8Nm maximum - Clip-ons: Not compatible - Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A
3T Luteus Team
$596.99
3T's Luteus Team is an all-carbon cyclocross fork designed for use with disc brakes. It features include a tapered steerer and aluminum-faced fork ends for precise handling and simple wheel changes. It supports brake calipers for use with standard 160mm brake rotors. The left fork blade is reinforced at the brake mounting pillars to compensate for the stresses imparted by disc braking. On its outer face, there is a recessed channel with two integrated fixing points for tidy brake cable/hose management. Plus, the fork ends face forwards and have aluminum inserts to better resist the lateral stresses transmitted through the hub by rough terrain.
3T Vola Team Stealth Essential
$649.99
Vola Team Stealth Essential is a lower-cost model of the award-winning Vola range. It's a complete starter package sharing the same architecture as Vola Team and based on the same 38cm-wide carbon fiber basebar. A super-low position favored by crono specialists is possible with extension clamps mounted on the underside of the basebar. Alternatively, extensions can be mounted above the basebar. Arm pad stack height above the stem centerline ranges from 30mm in the low position to 67mm in the top-mounted position. Width between the new comfort arm pads ranges 220–340mm, measured at pad outer edge. Arm pad reach can be set 20–70mm ahead of the basebar center, measured at pad front edge. Package includes alloy S-bend extensions, width extenders, and stiffness bridge. Riser kits, available as 3T spares, further raise stack height by up to 30mm. All-up weight of Vola Essential is just 700g. Finish with Team Stealth graphics.
3T Revo Team
$846.99
The bullhorn bar was introduced to the cycling world by 3T on Francesco Moser’s hour record bikes. Its design principle hasn’t significantly changed since, until now. The Revo seems so obvious, now, providing a better, safer and more powerful grip for the rider. Then again, good ideas always seem obvious after the fact. Revo is the first-ever aerobar to attach the basebar wing to the front of the grips instead of the back, literally changing aerobar design 180°. The advantages are clear: - The rider’s hands cannot slide forwards off the grips, so it’s safer and easier to use at all times - It offers better grip and handling on tough descents, rough roads and sketchy turns - It improves aerodynamics — the basebar wing has a sharper angle of attack with the free air flow than standard basebars - Wing material: Unidirectional carbon - Extension material: Alloy - Cradle material: Alloy - Pad material: Neoprene - Base bar width (c-c): 400mm - Outside pad width: 240-340mm - Center pad width: 130-230mm - Pad stack: 30-97mm - Pad reach: 20-70mm - Grip inside reach: 72mm - Grip drop: 46mm - Clamp diameter: 31.8mm - Extensions: S-bend - Cradle: New comfort - Weight: 770g (minimum stack) - Finish: Stealth black or black with red accents
3T Revo Team Stealth
$892.99
The bullhorn bar was introduced to the cycling world by 3T on Francesco Moser’s hour record bikes. Its design principle hasn’t significantly changed since, until now. The Revo seems so obvious, now, providing a better, safer and more powerful grip for the rider. Then again, good ideas always seem obvious after the fact. Revo is the first-ever aerobar to attach the basebar wing to the front of the grips instead of the back, literally changing aerobar design 180°. The advantages are clear: - The rider’s hands cannot slide forwards off the grips, so it’s safer and easier to use at all times - It offers better grip and handling on tough descents, rough roads and sketchy turns - It improves aerodynamics — the basebar wing has a sharper angle of attack with the free air flow than standard basebars - Wing material: Unidirectional carbon - Extension material: Alloy - Cradle material: Alloy - Pad material: Neoprene - Base bar width (c-c): 400mm - Outside pad width: 240-340mm - Center pad width: 130-230mm - Pad stack: 30-97mm - Pad reach: 20-70mm - Grip inside reach: 72mm - Grip drop: 46mm - Clamp diameter: 31.8mm - Extensions: S-bend - Cradle: New comfort - Weight: 770g (minimum stack) - Finish: Stealth black or black with red accents
3T Vola LTD
$999.99
Everyone's biometrics are different; no two cyclists should conform to the same TT set up. Comfort (we're talking about power-production) combined with aerodynamics, yields speed. You need the combined forces of both, and to do so you need to find your optimal position, which is why 3T designed their Vola LTD cockpit to be highly adjustable, not to mention light, stiff, and aero. - Narrow, aero-optimized base bars are built with 3T's HM carbon, cutting weight by huge margins - The super-low aero position favored by time trial specialists is possible with extension clamps mounted on the underside of the base bar - Arm pad stack height above the stem center line ranges from 30mm in the low position, to 97mm using all the included spacers in the top-mounted position - Width between the arm pads ranges 220—340mm, measured at pad outer edge - Arm pad reach can be set 20—70 mm ahead of the basebar center, measured at pad front edge - The arm pads rotate in their clamps -A reinforcing bridge is included for rigid, shake-free set-up, that can also double as a convenient computer clamp - Carbon aero extensions - Carbon base bars - Carbon 3T Comfort Cradles with neoprene pads - Weight: 750 grams in the "low position" - UCI legal
45NRTH Helva
$237.99
Riding in deep, sticky snow just got a whole lot easier. 45NRTH's Helva pedals feature an open CNC-forged body that excels at shedding snow. Its super thin 9mm profile gives you maximum clearance while cornering and riding in deep ruts, plus they're light. Sealed DU bearings keep them spinning smooth and replacement pin kits are available (sold separately) in seven different colors so you can color-coordinate your rig. - Size: 110mm wide x 100mm long x 9mm high - Spindle diameter: 9/16-inch - Weight: 308 grams
49°N Bolt-On Caliper Pads
$4.99
Threaded bolt-on caliper style pads - 40mm pad length
49°N Cantilever Pads 55mm
$4.99
Smooth post cantilever pads - 55mm pad length
49°N Traditional Saddle Clamp
$4.99
A traditional saddle clamp for use with vintage, older and inexpensive seatposts without an integrated clamp. - For use only with plain/pin-style seatposts that require a separate saddle clamping mechanism at the top - One bolt tightens the clamp to the rest of the seatpost and to the saddle rails at the same time. - 22.2mm / 7/8 fit with angle adjustment via serrated washers - Steel construction with ED black finish
49°N Bolted Axle Derailleur Protector
$5.99 - $6.49
Mounts at dropout to prevent derailleur damage. - Cut-outs allow smooth cable routing - Durable steel construction
49°N Cantilever Pads 70mm
$5.99
Smooth post cantilever pads - 70mm pad length
49°N Foam Comfort Grip
$5.99
Soft & comfortable foam rubber - Contoured to fit the hand comfortably
49°N Frame Mount Deraileur Protector
$5.99
Ultra-strong 1 piece construction. - Cut-out allows smooth cable routing for direct route derailleurs - Compatible with nutted and quick-release axles - Available in a variety of sizes to suit many types of bikes
49°N Road Brake Pads
$5.99
- Molded road brake pads - 50mm pad length
49°N V-Brake Pads 55mm
$5.99
Threaded post with hardware - 55mm pad length
49°N V-Brake Pads 70mm
$5.99
Threaded post with hardware - 70mm pad
49°N Kids Grip
$6.99
Gel rubber construction for the optimum balance of comfort and durability. - Diamond pattern provides excellent grip - 90mm length
49°N Alloy Seat Clamp
$8.99
Forged Alloy seat-clamp.
49°N QR Seat Binder
$8.99
Lightweight alloy lever. - Strong Cro-mo axle
49°N Bike Streamers
$9.99
Fun handlebar-mount streamers. - Quick and easy installation
49°N Kids/Youth Pedals
$9.99 - $10.99
Lightweight one-piece Polypropylene thermoplastic pedals with in-molded grip nodes. - Proportionally smaller platform size is perfect for smaller-sized feet - Durable 7mm boron steel axle - Loose ball bearing axle assembly - Built-in reflectors included - 9/16" / 1/2" axle options - 300g per pair - Dimensions: 93 x 87mm
49°N Strapless Toe Clips
$9.99
Strapless design for quick-and-easy entry and release. - Improves power transfer for efficient pedaling and helps keep feet in correct position on pedals - Durable nylon construction - In-molded anti-slip tread pattern - Includes mounting hardware - 62g per pair
49°N Alloy QR Seat Clamp
$10.99
Forged Alloy seat-clamp with QR lever.
49°N Big Block Grip
$10.99
Big vibration-dampening blocks offer comfort and enhanced grip. - Diamond pattern inner ring provides enhanced control - OD: 31mm - Length: 130mm
Live chat by BoldChat