Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Model Years
- Show Fewer Model Years
Cables
$25.99
Includes 2 replacement knarps for Desist brake set. Use one for front brakes, use both for dual-cable gyro setups.
$29.99
Kink's One Piece Cable system incorporates all the great features found in the DX linear cable and creates a simpler brake cable system requiring minimal setup. The three preset straddle cable lengths fit with all modern frames, and the remaining straddle cable length can easily be trimmed off. This single unit cable system greatly simplifies brake installation, reduces maintenance, and increases braking stiffness. Note: The One Piece Cable system requires a slotted cable guide and cable stop and works best with modern frames using a 245mm cable stop-to-mount distance.
Tech Specs
- Housing: Coated linear strand
- Wire: 1.5mm Pre-stretched slick wire
- Length: 50"
- Lug: Two-piece bind-free brass
- Fits: Frames with 245mm cable stop distance
- Weight: 3.0oz
$29.99
The Kink Linear DX cable features an outer linear strand housing, which decreases bind when the cable twists during tricks. The custom brass lever lug allows the inner wire to twist freely within the brake lever eliminating twist and bind even further. The inner 1.5mm cable is ground smooth to create an even smoother, drag-free pull. Aluminum ferrules prevent housing failure at both ends, and can easily be refitted after cable trimming.
TECH SPECS
- Housing: Coated Linear Strand
- Wire: 1.5mm Pre-Stretched Slick Wire
- Length: 50"
- Lug: Two-Piece Bind Free Brass
- Weight: 2.0oz
$29.99
A truly one-size-fits-all solution, the Kink Lower Gyro Cable features three sets of brake cable end lugs that can be trimmed off after the correct cable length is chosen. The dual-cable system fits with all standard 990-style brakes and frames, and fits most popular gyros. The dual-cable stop plate bolts cleanly to existing frame cable stops, for perfect dual-cable routing.
TECH SPECS
- Size: Universal
- Housing: Coated Linear Strand
- Wire: 1.5mm Pre-Stretched Slick Wire
- Lug: Multi-Length Trimmable Lug System
- Weight: 3.4oz
$29.99
The Kink Upper Gyro cables are a uniquely designed dual cable system and are available in two lengths to work with Kink-specific brake levers or the universal size to fit most other popular brake levers. The two ultra-smooth pre-stretched inner wires are combined into a single, cast lever lug, which brings the smoothness and stiffness of the dual-cable system to traditional brake levers without any protruding parts.
TECH SPECS
- Housing: Coated linear strand
- Wire: 1.5mm pre-stretched slick wire
- Lug: Unique, single, cast lever lug
- Weight: 2.3oz
$11.49
Straight brake cable featuring a 1.5mm pre-stretched inner cable with a tight coil housing and steel cable ends.
Product Specifications
- Length: 50"
- Weight: 3.4oz
$11.00
RockShox's Reverb Cable/Hose Line Guides are a great way to route dropper posts on frames without integrated guides. They secure with a zip tie, and feature a wide mouth that allows for cable articulation as you drop and raise your post.
$7.99 - $14.00
Stainless steel cables are extruded to provide a smooth, low-friction surface.
$9.00
- Front or rear brake
- MTB specific
- 1.5mm stainless cable
$10.99
Stainless steel cables are extruded to provide a smooth low-friction surface.
$13.00
SRAM's Cable Housing/Hydraulic Line Rotating Hooks secure your cable housings to hold them the way you want them, keep them from hitting each other, and making rattling noises, and they provide a tidy custom look, too.
$14.00
SRAM's Line/Housing Frame Protectors are rubber covers that simply press onto your cable housings and or hydraulic lines to prevent the housings from hitting the frame and rattling or damaging the finish. There are 4 protectors in each package.
$21.00
- Front or rear brake compatible
- Road specific
- 1.5mm polished stainless steel cable
$21.00
- For either front or rear shifter
- Road & MTB compatible
- 1.1 polished stainless steel cable
$33.00
- Complete ferrule and cable end kit
- Includes: Shift 4.0mm (Qty10), Brake 5.0mm (Qty 6), Cable Tip (Qty 4)
- Material: Aluminum
$49.00
- Aluminum cable-end crimps for derailleur or brake applications to prevent fraying after the final cut
$61.00
SRAM's SlickWire XL Road Brake Cable Kit is the perfect kit to have on hand to fix broken cables and a great upgrade, too. You get excellent 1.6mm coated cables, slippery lined 5mm-diameter housings, aluminum ferrules, and frame protectors.
$63.00
Includes
- 1.5mm coated cables (1 x 850mm, 1 x 1750mm)
- 5mm Kevlar-reinforced compression-free housing
- Ferrules, end caps, frame protectors
$68.99
SRAM's Guide Hydraulic Line Kit is a replacement hose kit for all Guide brakes.
- Compatible with SRAM Guide R, RS, RSC, and DB5 brakes
- Length: 2000mm
$70.99
Replacement line kit for SRAM and Avid hydraulic disc brakes.
- For Level Ultimate/Level TLM (A1), 2018+ CODE R/RSC (B1)
- 2000mm, black
$73.99 - $74.00
Original equipment hydraulic hoses for no-compromise brake performance.
- 2000mm, black
$74.00
Original equipment hydraulic hoses for no-compromise brake performance.
- Hose Use: Front, Rear
- Black
- 2000mm hose length
- Compatible with SRAM road hydraulic disc brakes
$75.00
- Brake casing has internal lining and external plastic coating
- Length: 30m
$75.00
Includes:
- 1.5mm polished stainless steel cables (1 x 1350mm, 1 x 2750mm)
- 5mm Kevlar-reinforced linear strand housing (black)
- Ferrules, end caps, frame protectors
$75.00
Includes:
- 1.5mm polished stainless steel cables (1 x 1350mm, 1 x 2350mm)
- 5mm Kevlar-reinforced linear strand housing (black)
- Ferrules, end caps, frame protectors
$75.00
Includes:
- 1.5mm polished stainless steel cables (1 x 850mm, 1 x 1750mm)
- 5mm Kevlar-reinforced linear strand housing (black)
- Ferrules, end caps, frame protectors
$148.00 - $169.00
- Brake casing has internal lining and external plastic coating
- Derailleur casing is compressionless with internal lining and external plastic coating
$256.00
- Hydraulic Disc Brake Hose Fitting Kit
- Includes 50 threaded hosebarbs, 50 red comp fittings, 1 T8 Torx
- Compatible with Stealthamajig and standard levers
$317.00
- 1.1mm polished stainless steel cable
- Unit of Measure: 100pcs
- Shift Cable Diameter: 1.1mm
- Cable Length: 2200mm
- Cable Material: Stainless Steel
- Shifter Cable Comp.: Shimano/SRAM
$21.99
Shimano Standard Road Brake Cable & Housing Set
2200mm x 5mm housing x 1
2050mm x 1.6mm double ended cable x 1
1000mm x 1.6mm double ended cable x 1
Housing end cap x 4
Cable end crimp x 2
$39.99
Shimano OT-SP41 Housing & Stainless Cable Derailleur Sets
3000mm x 4mm housing x 1
2100mm x 1.2mm stainless steel cable x 1
1800mm x 1.2mm stainless steel cable x 1
9 sealed end caps, 1 rubber shield, 1 nose cap & 2 crimps
Factory greased SP41 housing
$44.99
- Disc brake hose for all hydraulic Shimano disc brakes with straight connection type. Length 2000mm, outer diameter approx. 5mm.
- Compatible brake levers: BL-T615, ST-M4050, BL-M506, BL-M505, BL-M445, BL-M396, BL-M395, BL-M355
- Compatible brake caliper: BR-T615, BR-M4050, BR-M447, BR-M446, BR-M395, BR-M355
- Also compatible ST-RS785 and ST-RS685 road hydraulic levers with BR-RS785 or BR-RS805 calipers
- Straight connection at lever and caliper
$44.99
- 1.2 mm x 2100 mm (1 pc.)
- 1.2 mm x 1800 mm (1 pc.)
- OPTISLICK
- Stainless steel
- Outer cap with short tongue for ST (2 pcs.)
- SIS-SP40 outer caps (3 pcs.)
- SIS-SP40 sealed outer caps (1 pc.)
- Inner end caps (2 pcs.)
- OT-SP41 1700 mm
- OT-RS900 (1 pc.)
$44.99
Genuine Shimano shift cables & housing sets.
All sets feature two 1.2mm Shimano/SRAM compatible inner cables, pre-lubricated SP-41 housing, ferrules and cable ends;
Sets also include the long nose ferrules used in the latest generation of shifters;
Optislick: smoother cables with less friction, for higher performance applications;
$64.99
Shimano Dura-Ace BC-9000 Polymer Road Brake Cable & Housing sets reduce the sliding resistance to achieve lighter and quicker operation.
- Dura-Ace grade SLR-EV Road brake cable set
- Stainless steel for anti-rust protection
- Low friction polymer material on the cable may cause slippage at the cable fixing bolt after initial pre-stretch for the cable is performed. Fur-like material from polymer coating will not affect the performance
- Pre-lubed with special polymer compatible grease
$69.99
Shimano Dura-Ace Polymer Coated Road Shifter Cables & Housing Set
The Dura Ace Polymer-coated stainless cable set introduced with the DuraAce 9000 series; achieves lighter and quicker shifting, lighter braking with the reduced sliding resistance
OT-SP41 Shift cable set
Polymer-coated inner cable reduces the sliding resistance to achieve lighter and quicker operation
Sealed end caps to minimize dirt contamination
Housing is pre-lubricated with silicone grease
Stainless steel for anti-rust protection
Derailleur kit includes: (1) 1700mm 4mm colored SP41 casing, (2) 2100mm 1.2mm cables, (6) sealed casing caps and (2) cable tips
Low friction polymer material on the cable may cause slippage at the cable fixing bolt after initial pre-stretch for the cable is performed. Fur like material from polymer coating will not affect the performance
Cable Diameter: 1.2 mm
Housing Diameter: 4.0 mm
End Type: Shimano/Sram
Developed for Dura-Ace / Ultegra Components, But Also Compatible with all other Shimano cable-actuated road Shifting systems.
$219.99
- Brake housing for polymer coated brake cables
- Refer to Documents and links to find the right product
$14.99
Spiral cable wrap manages those messy cables to achieve a sleek clean look while protecting shifting, braking, and electronic bike cables and hoses.
$36.99
Precision-machined 4mm ID brass cable ferrules for improved shifting performance. A flat bottom on the inside prevents housing from pulling through ferrules. For use with most shifting cables.
- Inside diameter: 4mm
- Outside diameter: 5. 75mm
- Overall length: 12. 7mm
- Material: brass
- Bottle of 50pcs
$36.99
Precision-machined 5mm ID brass cable ferrules for improved braking performance. A flat bottom on the inside prevents housing from pulling through ferrules. For use with most brake cables.
- Inside diameter: 5mm
- Outside diameter: 5.75mm
- Overall length: 12.7mm
- Material: brass
- Bottle of 50pcs
$44.99 - $51.49
- Aluminum cable crimps to prevent frayed cables
- 1.2mm for shift cables or 1.6mm for brake cables
- Silver aluminum
- 250-count bottle
$61.99
Precision-machined 4mm ID silver aluminum cable ferrules for improved shifting performance. A flat bottom on the inside prevents housing from pulling through ferrules. For use with most shifting cables.
- Inside diameter: 4mm
- Outside diameter: 5.75mm
- Overall length: 12.7mm
- Material: aluminum
- Bottle of 50pcs
$63.49
Precision-machined 5mm ID silver aluminum cable ferrules for improved braking performance. A flat bottom on the inside prevents housing from pulling through ferrules. For use with most brake cables.
- Inside diameter: 5mm
- Outside diameter: 5.75mm
- Overall length: 12.7mm
- Material: aluminum
- Bottle of 50pcs
Previous page
Page 2 of 2