Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Other

Problem Solvers Standard Top Cap
$1.99
The Problem Solvers Standard Top Cap is a light, durable aluminum top cap for threadless headsets. These caps fit all forks.
Wheels Manufacturing Inc. Flat Head Screw
$4.79 - $7.19
Replacement M5 x 8 Flat Head Screw fastener for derailleur hangers. - Thread: M5-0.8 - Overall Length: 8mm - Material: Steel - Use with 3mm hex wrench - Bag of 5
Wheels Manufacturing Inc. Socket Head Screw
$4.79
Replacement M3 x 10 Socket Head Screw fastener for derailleur hangers. - Thread: M3-0.5 - Thread length: 10mm - Use with 2.5mm hex wrench - Bag of 5
Shimano Ultegra 6800 Front Derailleur Cable Fixing Assembly
$4.99
Shimano Front Derailleur Cable Fixing Assembly
Wheels Manufacturing Inc. M8 Derailleur Hanger Bolt
$5.29
Replacement M8 Nut/Bolt Set for Wheels Mfg derailleur hangers. - M8 chainring bolt style fastener - Use with 5mm hex wrench
49°N Traditional Saddle Clamp
$5.99
A traditional saddle clamp for use with vintage, older and inexpensive seatposts without an integrated clamp. - For use only with plain/pin-style seatposts that require a separate saddle clamping mechanism at the top - One bolt tightens the clamp to the rest of the seatpost and to the saddle rails at the same time. - 22.2mm / 7/8 fit with angle adjustment via serrated washers - Steel construction with ED black finish
FSA MegaExo 12 Left Arm Crank Bolt
$5.99
Tight tolerances and precise torque specs mean precision parts like this MegaExo 12 Left Arm Crank Bolt need to be replaced from time to time. Make sure the heart of your drivetrain is secure, and pick up a spare or two today.
RockShox Reverb Brass Post Keys
$6.00
A new stet of post keys for your RockShox Reverb tightens up any rotational slop that may develop normally with use. - Fits all generations of Reverb and Reverb Stealth - Brass Key sizes are defined by the number of lines on the key. (Zero lines means a "Size 0" key, 3 lines means a "Size 3" key.)
FSA MegaExo Left Crank Bolt for 19mm MegaExo Cranks
$6.49
This is a MegaExo Left Crank Bolt for 19mm MegaExo Cranks. - M12 bolt
FSA BB30 Wave Spring Washer
$6.50
It seems so small and insignificant, yet it's so important. The BB30 Wave Spring Washer is the keystone in your bottom bracket assembly, providing compression for proper setup and bearing preload, while helping to maintain adjustment after it's dialed in just right. They're also quite easy to lose or damage, so grab a few while you're at it.
Shimano Deore XT M8000 Rear Derailleur Cable Anchor Assembly
$7.49
Shimano Rear Derailleur Cable Anchor Assembly - Fits SLX M7000-10
Shimano Deore XT M8000 Shift Pod Cable Adjusting Unit
$7.49
Shimano Mountain Deore XT M8000 Shift Pod Cable Adjusting Unit
FSA Carbon SL Headset Spacers
$7.50
- Super light carbon spacers for tuning stem height - Spacers are internally weight relieved to drop a few extra grams
SDG Slater 22.2mm Shim Kit
$7.99
22.2mm shim kit to mount control levers. Slater bars are 19mm diameter. The shim kit allows for standard 22.2mm brake, shift and dropper post levers to be used.
SRAM Brake Pad Spreader Springs
$7.99
Brake Pad Spreader Springs - Available for Guide Ultimate and Guide X0 brakes
SRAM Flat Mount Disc Caliper Bracket Bolts
$8.49 - $32.99
Flat Mount Disc Caliper Bracket Bolts
SRAM TT Brake Lever Hardware Kit
$8.49
TT Brake Lever Hardware Kit
Zipp End Plug Cable Guide Vuka Extension
$8.49
Zipp Speed Weaponry Vuka Extension End Plugs - Plastic bar end plug pair for 22.2mm extensions
49°N Alloy Seat Clamp
$8.99
Forged Alloy seat-clamp.
Spank Headset Spacer Kit
$8.99
We won't blame you for attention to detail. In fact, Spank's got your back. These headset spacer kits are available in 8 popular colors, and come with 3 rings in incremental sizes, to make your next cockpit set up a thing of ease and beauty. - Material: Alloy - Sizes (mm): 3 / 6 / 12 - Diameter: 1 1/8" (28.6mm) - Finish: Brushed Anodized
Thomson Seatpost Bolt Kit
$8.99
Bolts, clamps and washers for Thomson Seatposts and Seat Clamps. - Sold individually, includes bolt, washer and nut
Wheels Manufacturing Inc. Custom M6 Bolt Set for Derailleur Hanger
$8.99
Replacement M6 Short Nut/Bolt Set for Wheels Mfg. derailleur hangers. - Custom M6 short chainring bolt style fastener - Use with 4mm hex wrench - Length of bolt: 6.4mm under head - Length of Nut: 3.5mm (under head), 5.2mm (overall)
Wheels Manufacturing Inc. Chainstay Protector
$9.69
Wheels Manufacturing Clear Chainstay Protector w/ Alcohol Prep Pad keeps your frame's paint looking good and helps quiet any chain slap on the chainstay.
3T Extension End Plugs
$9.99
End-plugs with opening for cable pass-through for aerobar extensions.
49°N Bike Streamers
$9.99 - $11.99
Fun handlebar-mount streamers. - Quick and easy installation
Shimano Dura-Ace R9100 Rear Derailleur Cable Anchor Assembly
$9.99
Keep the cable fixed securely in your Dura-Ace R9100 rear derailleur with this Shimano Rear Derailleur Cable Anchor Assembly
Shimano XTR M9000 Rear Derailleur Cable Anchor Assembly
$9.99
Keep the cable fixed securely in your XTR M9000 rear derailleur with this Shimano Rear Derailleur Cable Anchor Assembly
Wheels Manufacturing Inc. Carbon Fiber Headset Spacers 1-1/8-inch
$9.99 - $16.99
Carbon fiber headset stack spacers, precision-cut to ensure proper headset function. - Compatible with all threadless and threaded headsets
Wolf Tooth Components Remote Pivot Axle
$9.99
Wolf Tooth Remote Pivot Axle
Bike Yoke Bike Yoke Splits Clamp Handlebar Remote Adaptor
$10.50
Our clever Splits clamp attaches our Triggy directly to the handlebar. Special plastic compounds and production process allow flexibility within the clamp to have it installed, while grips and brakes are still on the bars. Just snap it on! A heat treated inlay made of stainless steel with a laser engraved finish, give it a unique and classy look. By the way: SRAM shifter triggers can also also be attached to the handlebars using our Splits clamp.
FSA BB30 Inner Snap Ring Set
$10.50
Snap rings are pretty ingenious, except they love to launch in an impossible-to-track direction when removing or installing. Maybe you should keep a spare set of these BB30 Inner Snap Rings, just in case.
Wheels Manufacturing Inc. Chainstay Protector - Wide
$10.99
Wheels Manufacturing Wide Chainstay Protector w/ Alcohol Prep Pad keeps your frame's paint looking good and helps quiet any chain slap on the chainstay. Wide design offers extra coverage for larger chainstays.
Shimano Dura-Ace R9100 Rear Derailleur Cable Adjusting Unit
$11.49
Need a spare Shimano cable adjuster assembly for your Dura-Ace R9100 rear derailleur? You've found it. Making sure this part is in working order can mean the difference between a two-second barrel twist to return your shifting to perfect, or getting out the multi-tool to readjust the cable again and again until it's close enough to get home. Your choice.
Cane Creek DB Volume Reduction Spacer Kit
$11.99
Installation of air volume reducers for Cane Creek shocks make the spring rate more progressive. - Spacers can be cut to fine-tune spring curve
Wheels Manufacturing Inc. Aluminum Headset Spacers 1-1/8-inch
$11.99 - $23.99
Aluminum headset stack spacers precision-cut to ensure proper headset function. - Precision-cut for proper function - Inner Diameter: 28.9mm - Outer Diameter: 34.4mm - Precision-machined aluminum
Wheels Manufacturing Inc. M8 Bolt for Dropouts 192, 275, 276
$11.99
M8 Bolt for DROPOUT-192, DROPOUT-275, DROPOUT-276 - Threads: M8x0.75 - Length Under Head: 1.110-inch - Head Diameter: 0.415-inch - Replaces Syntace X-12 Typ I screw - Sold Individually - Made in the USA
Electra Townie Quick-Release Seatpost Collar
$13.99
Electra's Townie Quick-Release Seatpost Collar offers a little extra bling and convenience to your Townie bike because it allows no-tools seat-height adjustment. This quality metal clamp is easy to install and use and it securely fastens your seatpost in place.
FSA BB/PF30 to 386EVO Road Adapter
$13.99
Your frame is BB30 or PF30. Your crank is 386EVO. No sweat. This adapter from FSA makes it happen. - For road use - Weight: 50g
Shimano SB77 Bar-End Shift Lever Segment Unit
$13.99
This replacement Shimano bar-end shifter segment unit is the expansion core that goes inside the handlebar. These can become damaged in a crash or during installation or uninstallation.
Supacaz Star Plugz Powder Coated
$13.99
The premier bar plugs in the pro peloton scream style. Color match or contrast to get your ideal look. Star Plugz are the clear choice for the discerning rider. - Powder-coated aluminum bar plugs - 3mm screw & expand - Laser-etched - Patented lock tight crown design (plugs never fall out)
Wheels Manufacturing Inc. Carbon Fiber Matte Headset Spacers 1-1/8-inch
$13.99
Carbon fiber headset stack spacers, precision-cut to ensure proper headset function. - Compatible with all threadless and threaded headsets
Shimano 7- and 8-Speed Chain Pins
$14.49
- Replacement chain pin for 7- and 8-speed Shimano chains - 3 replacement pins per pack
RockShox Reverb Hose Barb Post
$14.99
RockShox Reverb Hose Parts
Shimano Di2 Battery Charger Cable
$14.99
Shimano's Di2 Battery Charger Cable plugs into the Battery Charger (shown, but sold separately) so you can keep your electronic drivetrain at full power.
TRP HD3.4 i-Spec II Shifter Adapter
$14.99 - $16.99
Integrated Mountain bike shifter adapters for TRP brakes are now available for Shimano I-Spec B, I-Spec II, and SRAM MatchMaker. Adapters will mount your shifter or dropper lever directly to your TRP brakes to keep your cockpit nice and tidy.
Wheels Manufacturing Inc. Aluminum Headset Spacer
$14.99
You have to get that handlebar height just right. It's more comfortable, more efficient, and helps keep your entire upper body healthier. Wheels Manufacturing has your well-being covered with a wide variety of sizes to ensure your bars are right where they need to be. - Spacers are sold individually or in packs of 5 or 10 spacers. Select options from the dropdown menus to display pack size
Wheels Manufacturing Inc. Ball Bearing Retainer
$14.99 - $26.99
Grade 300 retainer bearings for headset and bottom bracket service. - 10 Retainers/Bag
Wheels Manufacturing Inc. Front Derailleur Spacer 1-1/4-inch
$14.99
This Wheels Manufacturing spacer allows you to mount a 1-1/4-inch clamp front derailleur on a 1-1/8-inch seat tube.
Wheels Manufacturing Inc. Front Derailleur Spacer 1-1/8-inch
$14.99
This Wheels Manufacturing Shim lets you mount a 1-1/8-inch clamp front derailleur on a 1-inch seat tube.
FSA Microspacer Headset Spacers
$15.99
- Microspacers ensure the correct fitment of integrated headsets - Use between the top cover and the compression ring to ensure the top cover does not contact the headtube - Sold in bags of 10
FSA QR-21 ME Self-Extracting Crank Bolts
$15.99
- Self Extracting crank bolt Suitable for: - Road: Powerbox alloy, Powerbox Supercompact alloy, Energy, Gossamer cranksets - Off-road: Powerbox alloy, KFX, Gradient cranksets
Jagwire 5G Tube Tops
$15.99
Jagwire Tube Tops cover housing or hydraulic hose to protect a frame’s finish from scratches and keep noise to a minimum. - 5G Tube Tops snap on at any time.
Lizard Skins Frame Shock Boot
$15.99
- Protective neoprene and velcro cut-To-Fit boot fits most rear shocks
Thomson Stem Cap
$15.99
- Machined aluminum with three Thomson logos circling the cap
Wheels Manufacturing Inc. Grade 25 Loose Ball Bearings
$15.99 - $25.99
Loose ball bearings to fit many brands of hubs, headsets, and bottom brackets. Grade 25 bearings are Dura-Ace or Campagnolo Record quality.
Campagnolo EPS V3 Power Unit Seatpost Mount
$16.00
EPS Power Unit Mounts are required for mounting the Power Unit to the bicycle and are available in both seatpost mount and waterbottle mount. - Fits external seat post diameters from 30.9 - 31.6mm - Not compatible with the V2 Power Unit
FSA FSA Self Extracting Left Crank Arm Bolt for Carbon Mega Exo Road Cranks
$16.00
This is an FSA MegaExo Crank Arm Fixing Bolt for MegaExo Cranks. - 26mm length - 12g - Designed to fit FSA cranks only - Includes M18 bolt, M27 self-extracting cap and washers
FSA MegaExo Self-Extracting Crank Arm Bolt for 19mm Alloy Cranks
$16.00
This is an FSA MegaExo Crank Arm Bolt for 19mm MegaExo alloy cranks - Designed to fit alloy FSA cranks only - Includes M12 bolt, M27 self-extracting cap, and washers
FSA MegaExo Self-Extracting Crank Arm Bolt for 24mm Alloy Cranks
$16.00
This is an FSA MegaExo Crank Arm Bolt for 24mm MegaExo alloy cranks - Designed to fit alloy FSA cranks only - Includes M17 bolt, M27 self-extracting cap, and washers
49°N Handlebar Shims
$16.99
Converts 31.8mm bar clamp diameter stems to accommodate smaller bar sizes.
Page 1 of 10 Next page