Other

Replacement M8 Nut/Bolt Set for Wheels Mfg derailleur hangers. - M8 chainring bolt style fastener - Use with 5mm hex wrench

This is a replacement Brake Hose Cover for the Lever End of Shimano BH90-SBM, BH90-SB levers. - Covers brake hose fitting at the brake lever

A traditional saddle clamp for use with vintage, older and inexpensive seatposts without an integrated clamp. - For use only with plain/pin-style seatposts that require a separate saddle clamping mechanism at the top - One bolt tightens the clamp to the rest of the seatpost and to the saddle rails at the same time. - 22.2mm / 7/8 fit with angle adjustment via serrated washers - Steel construction with ED black finish

Shimano Front Derailleur Cable Fixing Assembly

Mounts at dropout to prevent derailleur damage. - Cut-outs allow smooth cable routing - Durable steel construction

Ultra-strong 1 piece construction. - Cut-out allows smooth cable routing for direct route derailleurs - Compatible with nutted and quick-release axles - Available in a variety of sizes to suit many types of bikes

- Super light carbon spacers for tuning stem height - Spacers are internally weight relieved to drop a few extra grams

A new stet of post keys for your RockShox Reverb tightens up any rotational slop that may develop normally with use. - Fits all generations of Reverb and Reverb Stealth - Brass Key sizes are defined by the number of lines on the key. (Zero lines means a "Size 0" key, 3 lines means a "Size 3" key.)

It seems so small and insignificant, yet it's so important. The BB30 Wave Spring Washer is the keystone in your bottom bracket assembly, providing compression for proper setup and bearing preload, while helping to maintain adjustment after it's dialed in just right. They're also quite easy to lose or damage, so grab a few while you're at it.

Shimano Rear Derailleur Cable Anchor Assembly - Fits SLX M7000-10

Shimano Mountain Deore XT M8000 Shift Pod Cable Adjusting Unit

Tight tolerances and precise torque specs mean precision parts like this MegaExo 12 Left Arm Crank Bolt need to be replaced from time to time. Make sure the heart of your drivetrain is secure, and pick up a spare or two today.

Brake Pad Spreader Springs - Available for Guide Ultimate and Guide X0 brakes

Flat Mount Disc Caliper Bracket Bolts

Zipp Speed Weaponry Vuka Extension End Plugs - Plastic bar end plug pair for 22.2mm extensions

This is a MegaExo Left Crank Bolt for 19mm MegaExo Cranks. - M12 bolt

We won't blame you for attention to detail. In fact, Spank's got your back. These headset spacer kits are available in 8 popular colors, and come with 3 rings in incremental sizes, to make your next cockpit set up a thing of ease and beauty. - Material: Alloy - Sizes (mm): 3 / 6 / 12 - Diameter: 1 1/8" (28.6mm) - Finish: Brushed Anodized

Bolts, clamps and washers for Thomson Seatposts and Seat Clamps. - Sold individually, includes bolt, washer and nut

End-plugs with opening for cable pass-through for aerobar extensions.

Fun handlebar-mount streamers. - Quick and easy installation

Keep the cable fixed securely in your Dura-Ace R9100 rear derailleur with this Shimano Rear Derailleur Cable Anchor Assembly

Keep the cable fixed securely in your XTR M9000 rear derailleur with this Shimano Rear Derailleur Cable Anchor Assembly

Wheels Manufacturing Clear Chainstay Protector w/ Alcohol Prep Pad keeps your frame's paint looking good and helps quiet any chain slap on the chainstay.

Wheels Manufacturing Wide Chainstay Protector w/ Alcohol Prep Pad keeps your frame's paint looking good and helps quiet any chain slap on the chainstay. Wide design offers extra coverage for larger chainstays.

Zipp Speed Weaponry Vuka Extension End Plugs - Plastic bar end plug pair for 22.2mm extensions

ZIPP Service Course Bar End Plugs, Qty 2.

- Length: 8 mm, 5.5 mm - Material: Steel - Type: Hex - Set of 4 x 2

Snap rings are pretty ingenious, except they love to launch in an impossible-to-track direction when removing or installing. Maybe you should keep a spare set of these BB30 Inner Snap Rings, just in case.

Adjustable steel kickstand. - Axle-mount

Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.

Grade 300 retainer bearings for headset and bottom bracket service. - 10 Retainers/Bag

- Compatible with Super Record, Record, and Athena EPS systems - Required for use with the charger and works with V2 systems - USA/North America plug - adapters required for other countries

Screws required for mounting Campagnolo hydraulic rear calipers to bicycle frames. Lengths unique to frame specifications.

Replacement Remote-end Hose Barb for RockShox Reverb dropper seatposts. - Fits all generations of Reverb

Need a spare Shimano cable adjuster assembly for your Dura-Ace R9100 rear derailleur? You've found it. Making sure this part is in working order can mean the difference between a two-second barrel twist to return your shifting to perfect, or getting out the multi-tool to readjust the cable again and again until it's close enough to get home. Your choice.

Installation of air volume reducers for Cane Creek shocks make the spring rate more progressive. - Spacers can be cut to fine-tune spring curve

M8 Bolt for DROPOUT-192, DROPOUT-275, DROPOUT-276 - Threads: M8x0.75 - Length Under Head: 1.110-inch - Head Diameter: 0.415-inch - Replaces Syntace X-12 Typ I screw - Sold Individually - Made in the USA

Allows the lower of a 47mm IS headtube to be converted to use a standard 41mm 36x45 degree headset bearing.

Replacement elastomers for Thudbuster ST suspension seatposts allow the rider to tune for weight.

Electra's Townie Quick-Release Seatpost Collar offers a little extra bling and convenience to your Townie bike because it allows no-tools seat-height adjustment. This quality metal clamp is easy to install and use and it securely fastens your seatpost in place.

Greenfield's Kickstand attaches quickly and easily to most bicycles and provides a safe and convenient way to park your bikes at home and on the road and trail. It's also durable, lightweight, and looks great on any bike. Plus, it's made of a special non-corrosive aluminum and is built to last. You'll want one on all your bikes! - 285mm (for bikes 22" and under), 305mm (for bikes 22" and over) - For bikes without factory mounting plate (includes top plate and bolt) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

Shimano's Di2 Battery Charger Cable plugs into the Battery Charger (shown, but sold separately) so you can keep your electronic drivetrain at full power.

This Wheels Manufacturing spacer allows you to mount a 1-1/4-inch clamp front derailleur on a 1-1/8-inch seat tube.

This Wheels Manufacturing Shim lets you mount a 1-1/8-inch clamp front derailleur on a 1-inch seat tube.

- CNC machined aluminum alloy - Fits 26.8mm (1-1/8-inch) steer tube

Jagwire Disc Brake Hose Parts - For use only with Shimano branded hydraulic hose

This replacement Shimano bar-end shifter segment unit is the expansion core that goes inside the handlebar. These can become damaged in a crash or during installation or uninstallation.

The premier bar plugs in the pro peloton scream style. Color match or contrast to get your ideal look. Star Plugz are the clear choice for the discerning rider. - Anodized aluminum bar plugs - 3mm screw & expand - Laser-etched - Patented lock tight crown design (plugs never fall out)

The premier bar plugs in the pro peloton scream style. Color match or contrast to get your ideal look. Star Plugz are the clear choice for the discerning rider. - Powder-coated aluminum bar plugs - 3mm screw & expand - Laser-etched - Patented lock tight crown design (plugs never fall out)

- Machined aluminum with three Thomson logos circling the cap

Converts 31.8mm bar clamp diameter stems to accommodate smaller bar sizes.

- Microspacers ensure the correct fitment of integrated headsets - Use between the top cover and the compression ring to ensure the top cover does not contact the headtube - Sold in bags of 10

Jagwire Tube Tops cover housing or hydraulic hose to protect a frame’s finish from scratches and keep noise to a minimum. - 5G Tube Tops snap on at any time.

RockShox Reverb Hose Parts

Wheels Manufacturing 1-1/8 4-Piece Headset Spacer Kit includes an assortment of black anodized aluminum headset spacers for 1-1/8" fork steerers. Includes one each: - 2.5mm - 5mm - 7.5mm - 10mm

- Black carbon fiber weave headset spacers for tuning ride height - No logos - Includes five (5) 1-1/8" x 2.5mm spacers

Replacement spacer pack for Wheels Mfg. 24mm (Shimano) bottom brackets. Bearings sold separately. Pack Includes: - (2) - Silicone Dust Seal, 24mm ID - (2) - 0.5mm, 24mm ID Crank Spindle Spacer - (2) - 1.0mm, 24mm ID Crank Spindle Spacer

EPS Power Unit Mounts are required for mounting the Power Unit to the bicycle and are available in both seatpost mount and waterbottle mount. - Fits external seat post diameters from 30.9 - 31.6mm - Not compatible with the V2 Power Unit

Keep the weight down and your headset snug with the Specialzied Carbon Steerer Tube Plug.

Your frame is BB30 or PF30. Your crank is 386EVO. No sweat. This adapter from FSA makes it happen. - For road use - Weight: 50g