Adjustable steel kickstand. - Axle-mount
Alloy construction with steel top plate. - 305 mm long - Universal fit
Converts 31.8mm bar clamp diameter stems to accommodate smaller bar sizes.
Alloy shaft converts threaded forks to work with clamp on threadless Ahead-type stems. - Fits all models of threadless stems with 1-1/8 steerer clamp
Adjustable steel kickstand - Chainstay-mount
Lightweight adjustable alloy kickstand. - Chainstay-mount
Suitable for E-Bikes or any heavily loaded bike. - 20kg / 44lb Max load rating - Adjustable for wheels 24 to 29/700c - 295g
Suitable for E-Bikes or any heavily loaded bike. - 30kg / 66lb Max load rating - 18mm Bolt hole mount spacing - Adjustable for wheels 24 to 29/700c - 315g
Suitable for E-Bikes or any heavily loaded bike. - 30kg / 66lb Max load rating - 40mm bolt hole mount spacing - Adjustable for wheels 24 to 29 / 700c - 315g
Lightweight adjustable alloy kickstand. - Chainstay-mount, compatible with disc-brake equipped bikes
Suitable for E-Bikes or any heavily loaded bike. - 40kg / 88lb Max load rating - Adjustable for wheels 24 to 29/700c - Legs fold to left away from chain rings - 710g
- Includes stainless bolts - Fits 160mm front and 140mm rear rotors
- Includes stainless steel bolts - 40mm fits 200mm Front and 180mm Rear Rotors
Essential parts to properly service and maintain all Avid CODE brakes. - Replacement parts for 2011-2016 CODE brakes - Includes bearings, bearing press tool, pivot bolt, cam, cam spring, and lever
- Compatible with Super Record, Record, and Athena EPS systems - Required for use with the charger and works with V2 systems - USA/North America plug - adapters required for other countries
$11.00 - $14.00
Screws required for mounting Campagnolo hydraulic rear calipers to bicycle frames. Lengths unique to frame specifications.
EPS Power Unit Mounts are required for mounting the Power Unit to the bicycle and are available in both seatpost mount and waterbottle mount. - Fits external seat post diameters from 30.9 - 31.6mm - Not compatible with the V2 Power Unit
EPS Power Unit Mounts are required for mounting the Power Unit to the bicycle and are available in both seatpost mount and waterbottle mount. - For mounting the V3 power inside the seat tube using the water bottle screws - Not compatible with the V2 Power Unit
EPS cable kits come in multiple options that allow for the mounting of the power unit beneath the bottom bracket or beneath the saddle. - Weathertight o-ring sealed connectors - Allows for the mounting of the EPS Power Unit beneath the bottom bracket - Only compatible with Chorus and Athena EPS systems
EPS cable guide magnets are required for internally routing EPS wires. - Includes: wire, metal cable, and magnet
Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.
Installation of air volume reducers for Cane Creek shocks make the spring rate more progressive. - Spacers can be cut to fine-tune spring curve
$11.99 - $12.99
Replacement elastomers let you tune the suspension on your Cane Creek Thudbuster short-travel seatpost. Available in various models, ranging from extra soft to extra firm.
Allows the lower of a 47mm IS headtube to be converted to use a standard 41mm 36x45 degree headset bearing.
Replacement elastomers for Thudbuster ST suspension seatposts allow the rider to tune for weight.
$25.99 - $32.99
Mounting hardware fits a variety of Cane Creek shocks.
Replacement springs for Cane Creek Helm suspension forks.
Rebuild kits come with everything you need to service moving parts on a Cane Creek Thudbuster suspension seatpost. - Rebuild bushing tools - LT arm screws (M4 x 20mm) - Saddle clamp bolt (M5 x 35mm) - Saddle clamp spherical washers - Saddle clamp adjustment knob
Slamset top headsets are designed to keep the stack height low. - Hellbender bearings with improved seal structure
Hellbender bearings have an improved seal structure and are cross compatible with Cane Creek headsets.