Shoes

The all-new S-Works Ares 2 is the ultimate shoe for racers looking for the most positive, locked-in feel without sacrificing comfort. Engineered with our Body Geometry methodology for power, comfort, and pedaling precision—delivering a 7-watt power increase while reducing forefoot pressure by 44%. The S-Works Ares 2 is the pinnacle of race footwear—redefined. - Use – Road racing. - Body Geometry Last – All-new Body Geometry last reduces forefoot pressure by 44%. - Outsole Material – Unidirectional carbon. - Fit System – BOA® Li2 Fit System. - Weight – 263g for a half-pair, size 44

The all-new S-Works Ares 2 is the ultimate shoe for racers looking for the most positive, locked-in feel without sacrificing comfort. Engineered with our Body Geometry methodology for power, comfort, and pedaling precision—delivering a 7-watt power increase while reducing forefoot pressure by 44%. The S-Works Ares 2 is the pinnacle of race footwear—redefined. - Use – Road racing. - Body Geometry Last – All-new Body Geometry last reduces forefoot pressure by 44%. - Outsole Material – Unidirectional carbon. - Fit System – BOA® Li2 Fit System. - Weight – 263g for a half-pair, size 44

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

From recent road converts, to sultans of dirt speed, the new S-Works Recon delivers pavement-bred performance to the gravel and XC discipline. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is an intentional fit, that's stiff, comfortable, and tunable—to put the power down. Inside and out, Body Geometry technology is baked into the the S-Works Recon. Driven by nearly two decades of development and validated by data, we ensure there are no pain points, only performance, where your body meets the bike. Through our creation of the Varus Wedge, Longitudinal Arch, and Metatarsal Button, your feet stay in their most optimal position when pedaling—as well as inline with your knee and hips. - High-density pontoons and new shims allow riders to tune their pedal interface for maximum efficiency and a road-like pedal platform - Features Body Geometry technology by way of the Varus Wedge, a Longitudinal Arch, and Metatarsal Button - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Using an Internal I-Beam adds stiffness and strength—eliminating the need for additional bracing and allowing the shoe to stay extremely lightweight - Zoned reinforcement across quarter and forefoot maximizes support while the updated BOA® routing improves lockdown—eliminating the need for a toe strap - For a wider fit — the new base plate is 4mm wider than the standard width (8mm wider than S-Works Recon Mountain Bike Shoes). - Approximate weight: 280g for a 1/2 pair size, 44

The Factress Techlace is Giro's lightest weight women’s road shoe, featuring a revolutionary closure system that couples the benefits of laces with the convenience of a dial. The Techlace system replaces D-rings and other hardware with laces, providing a more supple feel across the forefoot, and the laces can be easily replaced if damaged. The Boa IP1 dial offers fast, intuitive adjustment in 1mm increments when tightening or loosening. The Factress Techlace has all the performance you’d expect from Giro: The upper is constructed with Evofiber SL, which is durable yet highly breathable. Inside the shoe, the SuperNatural Fit footbed features adjustable arch supports to personalize fit, comfort and pedaling efficiency. Power transfer is bolstered by the Easton EC90 SLX2 carbon fiber outsole, which is among the lightest, thinnest and stiffest pedaling platforms on the road, giving you a direct connection to the pedals. - One-piece upper design - Premium Evofiber SL breathable Teijin microfiber - Techlace + Boa IP 1 dial (1mm +/- with macro release) - Easton EC90 SLX2 high-modulus carbon - Steel hardware - Replaceable heel pads - Super Natural Fit Kit with adjustable arch support - X- Static anti-microbial fiber - Travel bag included - Weight: 210 grams (size 42.5)

From recent road converts, to sultans of gravel speed, the new S-Works Recon delivers pavement-bred performance to the gravel discipline. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is an intentional fit, that's stiff, comfortable, and tunable—to put the power down. Inside and out, Body Geometry technology is baked into the S-Works Recon. Driven by nearly two decades of development and validated by data, we ensure there is no pain points, only performance, where your body meets the bike. Through our creation of the Varus Wedge, Longitudinal Arch, and Metatarsal Button, your feet stay in their most optimal position when pedaling—as well as in line with your knee and hips. - High-density pontoons and new shims allow riders to tune their pedal interface for maximum efficiency and a road-like pedal platform - Features Body Geometry technology by way of the Varus Wedge, a Longitudinal Arch, and Metatarsal Button - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Using an Internal I-Beam adds stiffness and strength—eliminating the need for additional bracing and allowing the shoe to stay extremely lightweight - Zoned reinforcement across quarter and forefoot maximizes support while the updated BOA® routing improves lockdown—eliminating the need for a toe strap - Additional 3mm, 6mm, and 9mm pontoon shims for leg length discrepancy and cleat stacker available through Specialized Rider Care. - For a wider fit — the new base plate is 4mm wider than the standard width (8mm wider than S-Works Recon Mountain Bike Shoes). - 280g for a size 156

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you’ll forget you’re wearing it. Leveraging data science, we refined every detail of the S-Works Torch’s upper for improved fit and performance. The BOA® cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL biomechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. New upper features reinforcement in key zones while also offering adaptie fit zones to create a disappearing fit on the foot. Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. By optimizing its constructiuon, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. Updated BOA® cable routing improves lockdown while reducing pressure across anterior ankle ligaments. Independent alloy BOA® S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA® Guarantee. Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. Non-slip, replaceable heel tread with internally recessed screws for security. *** IMPORTANT FOR WIDE FIT*** the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you’ll forget you’re wearing it. Leveraging data science, we refined every detail of the S-Works Torch’s upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL biomechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering fit zones to create a disappearing fit on the foot. - Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. *** IMPORTANT FOR WIDE FIT*** the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you’ll forget you’re wearing it. Leveraging data science, we refined every detail of the S-Works Torch’s upper for improved fit and performance. The BOA® cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL biomechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptie fit zones to create a disappearing fit on the foot. - Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its constructiuon, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA® cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA® S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA® Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. *** IMPORTANT FOR WIDE FIT*** the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

At just 185g per shoe with pro-level performance and unrivaled comfort, the Empire SLX lets you fly in first-class style. To make a minimalist shoe that retains the supportive structure of the legendary Empire while advancing the style, we started with a one-piece ultralight monofilament Synchwire mesh upper designed around a classic laced closure to fit and feel like a second skin. Thermal-welded Teijin TPU adds structural support exactly where its needed, and a high-modulus Easton EC90 SLX2 carbon fiber plate provides ultimate stiffness to weight for power transfer. Our adjustable Super Natural Fit footbed system is the final touch, allowing you to customize arch support right out of the box for luxurious comfort and optimal pedaling efficiency. - One-piece upper design - Premium Evofiber SL breathable Teijin microfiber upper - Empire laces: hold a knot, durable, and light - Easton EC90 SLX2 high-modulus carbon - Titanium hardware - Replaceable heel pads - Ultralight Super Natural fit kit with adjustable arch support - Ultralight footbed - XT2 anti-microbial fiber top sheet - 185 grams (size 42.5 with ultralight footbed)

The Empire ACC continues to redefine the boundaries of high-performance cycling shoes for women. The iconic laced closure offers seven points of fit adjustment for unrivaled adjustment and comfort, and complements the breathable Evofiber synthetic upper that wraps to the contours of your foot like no other cycling shoe. The Easton EC90 ACC full-carbon sole offers the stiffness needed for everything from Grand Tours to gran fondos, with ultra-low 6.5mm stack height for a direct connection to the pedals. And Giro's adjustable SuperNatural Fit footbed lets you fine-tune the fit and arch support for an unmatched blend of performance and style.

The all-new S-Works Torch Lace delivers the timeless, refined style of a lace-up with an unprecedented level of efficiency, lightweight, and comfort thanks to Body Geometry. It all adds up to a shoe that disappears on your foot, yet begs to be seen. Like every shoe we make, the S-Works Torch Lace starts with Body Geometry - identify a problem, solve it with design, and validate it with science - to improve comfort, increase performance, and reduce the chance of injury for every rider. Comfort: The S-Works Torch Lace utilizes our new forefoot shape - 4mm wider than the S-Works 7 - based on extensive 3D foot scans and Retül data. The upper features remapped zonal layering throughout. It remains incredibly supple to adapt to different foot shapes, yet won’t stretch over a long day in the saddle to ensure a secure, consistent fit. An asymmetric heel counter reduces hard touch points against the ankle and still delivers knee stability validated by our Human Performance team. Efficiency: Every Body Geometry shoe optimizes ankle, knee, and hip alignment for a stable and pedal stroke with our patented Varus Wedge, a 1.5mm outward tilt to the outsole. Thanks to the lightweight retention of laces and watching every gram - from the carbon outsole to the upper material - the S-Works Torch Lace weighs a feathery 200 grams in size 42. With an internal ‘I-Beam’ the carbon outsole provides the ideal stiffness-to-weight ratio for big efforts without adding excess grams, optimized by working with the best riders in the world. Style: Beauty is in the eye of the beholder, and those that see the S-Works Torch Lace will get to admire them as long as they can hang on your wheel. With classic lines and understated colorways the S-Works Torch Lace is at home whether you chase finish lines or mountain tops before sunset. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Laced closure maintains the most opportunity to customize fit along the entire foot. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - Approximate weight: 200g (1/2 pair, Size 42).

Most winter boots aren't made for riding bikes — they're too warm in some spots or not warm enough in others, and they're not optimized for pedaling. Wölvhammer BOA® boots are the answer for winter riders. Designed and built for the rigors of real winter riding (deep snow, slippery ice, cold pedals), These winter bike boots are rated for comfort from 0º to 25ºF (-18º to -4ºC), slotting between our Ragnarök and Wølfgar boots. Take on winter rides with Wölvhammer. - Rated for 0º to 25º F / -18º to -4º C comfort - The BOA® Fit System delivers micro-adjustable, precision fit engineered to perform in the toughest conditions - Hook-and-loop upper strap helps secure boot - Removable synthetic liner boot for quick drying - Waterproof breathable membrane to manage moisture - 200 g of Primaloft® insulation - Aerogel insulation underfoot blocks the chill from snow, ice, and cold pedals, and allows for insoles without sacrificing warmth - Non-slip sole for walking on icy surfaces - Compatible with flat and clipless pedals NOTE: The webbing loop on the back of the original liner boot was not stitched properly and will come loose if pulled with too much force. All Wölvhammer BOA shipments will now include free updated liner boots with the loop sewn directly to the vertical seam on the back of the liner for a much stronger connection.

Go ahead, take a second look. The Empire VR70 Knit is unlike any mountain bike shoe you've ever seen. It features Giro's newly engineered Xnetic Knit upper, which offers unparalleled comfort and breathability, with a bonded TPU exoskeletal system to provide support where you need it. The upper is DWR-treated for water repellency and easy cleaning, while a rubber toe guard and bonded TPU heel increase durability and abrasion resistance. A closed stretch-knit ankle cuff provides superior comfort, additional support, and protection from skree out on the trail. All of this is built on top of a stout Easton EC70 carbon fiber sole that offers pro-level stiffness, and a tough, molded Vibram rubber outsole that provides protection and grip when you're off the bike. - Engineered Xnetic Knit upper - Bonded TPU exoskeletal support structure - Closed stretch-knit ankle cuff - Rubber toe guard - Bonded TPU heel guard - DWR treated - Empire laces: hold a knot, durable and light - Easton EC70 carbon composite - Molded Vibram rubber high-traction lugged outsole - Accommodates steel toe spikes - SuperNatural Fit Kit with adjustable arch support

Take charge of the road with full-featured performance and comfort. To make a full-featured shoe that can handle extended miles and hard roads, we started with an ultralight monofilament mesh Synchwire upper that fits and feels like a second skin, then added thermal-welded TPU for structural support and resistance to grit and grime. Fast, intuitive fit adjustment is guaranteed with dual Boa L6 buckles, steel laces, and soft lace guides that allow you to get a precise fit with even pressure distribution to ensure comfort with every turn of the pedals. And finally, the advanced carbon composite plate ensures efficient power transfer and responsive feel at the pedals, while allowing 5mm of adjustment for optimal cleat positioning. Upper construction: - One-piece Synchwire upper with thermo-bonded exo-structure - Laser-perforated ventilation throughout - Dual Boa L6 dials featuring 1mm adjustment and macro release, with steel lace and soft lace guides - Reflective heel tab Footbed: - 3D-molded footbed with medium arch support Outsole: - Carbon-composite 3-bolt plate - Dual-injected TZU walking pads - Stainless steel hardware with 5mm fore/aft adjustment Product weight: - 265 grams (Size 42)

Take charge of the road with full-featured performance and comfort. To make a full-featured shoe that can handle extended miles and hard roads, we started with an ultralight monofilament mesh Synchwire upper that fits and feels like a second skin, then added thermal-welded TPU for structural support and resistance to grit and grime. Fast, intuitive fit adjustment is guaranteed with dual Boa L6 buckles, steel laces, and soft lace guides that allow you to get a precise fit with even pressure distribution to ensure comfort with every turn of the pedals. And finally, the advanced carbon composite plate ensures efficient power transfer and responsive feel at the pedals, while allowing 5mm of adjustment for optimal cleat positioning. Upper construction: - One-piece Synchwire upper with thermo-bonded exo-structure - Laser-perforated ventilation throughout - Dual Boa L6 dials featuring 1mm adjustment and macro release, with steel lace and soft lace guides - Reflective heel tab Footbed: - 3D-molded footbed with medium arch support Outsole: - Carbon-composite 3-bolt plate - Dual-injected TZU walking pads - Stainless steel hardware with 5mm fore/aft adjustment Product weight: - 265 grams (Size 42)

Race-ready. Adventure inspired. The Sector combines a supple, breathable Synchwire upper with a stout carbon-composite plate and an aggressive, dual-injected rubber outsole for excellent traction that won't de-laminate or break down. A supportive 3D molded footbed with Aegis anti-microbial treatment enhances comfort and fit, which is adjustable via dual BOA L6 dials featuring 1mm adjustment and macro release. It's a great choice for riders looking for inspired performance that's capable on the course or off the beaten track. Great for riding on the course or off the beaten track, the Women's Sector mountain bike shoe is ready to power up for adventures. - One-piece Synchwire upper with thermo-bonded exo-structure - Reinforced heel and toe sections - Dual Boa L6 dial featuring 1mm adjustment and macro release, with steel lace and soft lace guides - 3D molded footbed with medium arch support - Carbon-composite 2-bolt plate with dual-injected rubber outsole - Stainless steel hardware - 323 grams (size 39)

With exceptional warmth and waterproofing for the coldest and wettest conditions, a heat-reflecting insole, and a QuickLace system that's housed under the outer shroud, your coldest days on the road are soon to be your favorite. The all-new Blaze is our core winter cycling shoe, featuring modern technical materials and design to reduce bulk while delivering exceptional warmth and weatherproofing for conditions down to -10° C /14° F. The heart of the Blaze is an internal, moisture-wicking mountain bike shoe that's fully insulated with a channeled, high-loft Primaloft synthetic sheath featuring 10,000 W/P + 10,000 GM2 wind- and waterproof performance plus a heat-reflecting insole and protective reinforcement in key wear zones. The result is a breakthrough in warm, dry comfort with purpose-driven details that inspire confidence to pedal through the toughest winter riding conditions. Specs: - Upper Construction: Stretch woven face fabric with 10,000 w/p + 10,000 GM2; film channeled, high-loft fleece interior plus elastic outer collar Primaloft synthetic insulation; Fully seam-sealed stitching; Breathable, moisture-wicking mesh upper inner shoe; Thermobonded rubber toe and heel reinforcements; Integrated ankle padding; Reflective detail at heel and side profile - Reflectivity: Reflective detail at heel and side profile - Footbed: Heat-reflective insole with high loft fleece and laminated foil - Outsole: Nylon-composite plate; Dual-injected "Ice grip" soft rubber outsole; Stainless steel hardware - Weight: 385g (Size 42)

The Expedition PRO blends the lightweight and stiffness of a road shoe with the durability of a mountain bike shoe. If you’re lining up for a gravel event or cross-country race, look no further. The perforated synthetic leather upper features bonded construction to reduce bulk for a breathable slipper-like fit. A pair of BOA® L6C dials give riders independent adjustment of the mid and forefoot zones and we incorporated Soft TX lace guides to eliminate pressure points across the top of the foot. Off-road riding can be dirty work, so we wrapped the toe and heel of the 1:1® EX PRO Carbon sole in a scuff-resistant TPU layer and incorporated a mud-shedding open tread design. Inside, you’ll find a dual-density footbed that’s ergonomically designed to provide optimal support, pedaling efficiency, and comfort. Crush the big miles in comfort with the Expedition PRO. FEATURES: - BOA® Fit System with L6E Reel and forefoot strap for zonal fit adjustments - Soft TX lace guides eliminate pressure and hotspots - 2-bolt SPD cleat compatible - 1:1® Next Step Nylon composite sole does what no other can: delivers uncompromising pedaling performance and confident off-the-bike hike-ability - Reinforced toe bumper for added durability and protection - TPU lugs deliver off-the-bike confidence FABRIC: - Upper: 100% rubber/plastic, Bottom: 60% carbon fiber, 38% TPU, 2% steel

You've seen knit technology in athletic footwear, but you haven't seen it in cycling … until now. The women's specific Empire E70 W Knit features Giro's newly engineered Xnetic Knit upper, which offers unparalleled comfort and breathability. Xnetic Knit technology was developed for the specific needs of performance cycling. An internal TPU skeletal system provides support where you need it, while the knit offers suppleness for superior sock-like comfort. The upper is DWR-treated for water repellency and easy cleaning, and a TPU-reinforced toe and heel add durability and abrasion resistance. Plus, the style of the Empire E70 Knit is simply undeniable. - Engineered Xnetic Knit upper - Bonded TPU skeletal support structure - TPU-reinforced toe and heel - DWR treated - Empire laces: hold a knot, durable and light - Easton EC70 carbon composite outsole - Steel hardware - Replaceable heel pads - Molded EVA footbed with medium arch support - Weight: 230 grams (size 39)

The women's Espada Boa combines timeless cycling style with the latest materials to redefine performance at this price. It starts with a perforated, breathable microfiber and mesh upper that conforms to your foot, with a Boa L6 closure dial for fast, intuitive adjustment. Then Giro adds a robust Easton EC70 carbon composite outsole with replaceable heel pads to get the most out of your pedal stroke, without sacrificing long-term durability. - Breathable microfiber and mesh upper - Boa L6 (1mm + with macro release) retention with premium cover - Offset low-profile straps and offset D-ring - Easton EC70 carbon composite outsole - Molded EVA footbed with medium arch support - Weight: 245 grams (size 39)

The Trans Boa combines timeless cycling style with the latest materials to redefine performance at this price. It starts with a perforated, breathable microfiber and mesh upper that conforms to your foot, with a Boa L6 closure dial for fast, intuitive adjustment. Then Giro adds a robust Easton EC70 carbon composite outsole with replaceable heel pads to get the most out of your pedal stroke, without sacrificing long-term durability. - Breathable microfiber and mesh upper - Boa L6 (1mm + with macro release) retention with premium cover - Offset low-profile straps and offset D-ring - Easton EC70 carbon composite outsole - Steel hardware - Replaceable heel pads - Molded EVA footbed with medium arch support - Weight: 265 grams (size 42.5)

Race-Ready Performance Road Cycling Shoe Packed with race-focused features, the RC703 utilizes the same S-PHYRE fit technology found in our pro-level road shoes. Designed to deliver all-day comfort and efficient power transfer, it employs a low stack height midsole and new Power Zone lace guides that reduce weight and increase pedaling stability. Features: - The updated RC703 is a race-ready road cycling shoe that’s lightweight, comfortable, and designed to help keep you at the front of the pack - Optimal Efficiency: Low stack height midsole, refined instep straps, and new Power Zone lace guides provide stable pedaling platform for enhanced power transfer - Breathability: Synthetic leather upper with strategically-placed perforations increases ventilation, keeping you cool and comfortable when the race is on - Dialed Fit: Surround wrapping upper accommodates broad range of foot shapes, while dual micro-adjustable BOA L6Z dial enables a personalized fit - Options Abound: Available in three colorways and standard sizes from 40-48 (plus half sizes 41.5-46.5 and wide options 40-50) mean there’s an ideal choice for you and your style

Step into the future of cycling with the Men’s PRO Road Shoes, engineered for riders who refuse to compromise. Designed for unmatched power transfer, supreme comfort, and all-day efficiency, these shoes are built to help you break away from the pack and push past your limits. Crafted with an ultra-light carbon composite sole, the PRO Road Shoes maximize stiffness for incredible pedaling efficiency, ensuring every watt of your effort is translated into forward motion. The dual BOA® Fit System delivers micro-adjustable precision, securing your foot with a customized fit that eliminates pressure points while providing rock-solid stability in the saddle. Breathability meets long-haul comfort. A perforated, seamless upper made from high-performance synthetic materials ensures optimal airflow, keeping your feet cool and dry even on the hottest rides. The integrated heel cup and anatomically designed footbed provide superior arch support and lockdown, allowing you to stay focused on the road ahead. Pair them with our Men’s PRO Bib Shorts for a pro-level kit from head to toe, or browse our full lineup of men’s cycling shoes to find the perfect fit for your riding goals. - 3-bolt cleat compatible - 1:1® PRO Carbon Power Plate drops weight and adds ventilation without sacrificing stiffness - Soft TX lace guides eliminate pressure and hotspots - BOA® Fit System with dual L6C dials for zonal adjustment - Perforated synthetic leather upper is durable and breathable - Dual density 1:1® footbed is ergonomically designed to provide optimal support, pedaling efficiency and comfort - 252 grams per shoe (size 42)

The latest iteration of our popular PRO Road shoe offers a slipper-like fit and a high level of stiffness, in a sophisticated package. Perforated synthetic leather is bonded together to form a sleek, strong, and breathable upper, while a pair of BOA® L6C dials give riders the ability to make independent micro-adjustments to the mid and forefoot for a perfect fit. Soft TX lace guides replace the traditional BOA cables to eliminate pressure points on the top of the foot. For maximal power transfer, this shoe is built off the 1:1® PRO Carbon Power Plate. It has been carefully designed to concentrate material where it matters most for stiffness, with ventilation zones where it’s not needed. An ergonomically-designed, dual-density footbed provides optimal support, pedaling efficiency and comfort, so you can go far and go fast. FEATURES: - Perforated synthetic leather upper is durable and breathable - BOA® Fit System with dual L6C dials for zonal adjustment - Soft TX lace guides eliminate pressure and hotspots - 1:1® PRO Carbon Power Plate drops weight and adds ventilation, without sacrificing stiffness - Dual density 1:1® footbed is ergonomically designed to provide optimal support, pedaling efficiency, and comfort - 252 grams per shoe (size 42) FABRIC: - Upper: 95% rubber/plastic, 5% textile, Bottom: 98% carbon fiber, 2% steel

The latest iteration of our popular Women’s PRO Road shoe offers slipper-like fit and an high level of stiffness, in an sophisticated package. Perforated synthetic leather is bonded together to form an sleek, strong, and breathable upper, while an pair of BOA® L6C dials give riders the ability to make independent micro-adjustments to the mid and forefoot for an perfect fit. Soft TX lace guides replace the traditional BOA cables to eliminate pressure points and hotspots on the top of the foot. For maximal power transfer, this shoe is built off the 1:1® PRO Carbon Power Plate. It has been carefully designed to concentrate material where it matters most for stiffness, with ventilation zones where it’s not needed. An ergonomically-designed, dual-density footbed provides optimal support, pedaling efficiency and comfort, so you can go far and go fast. - 3-bolt cleat compatible - 1:1® PRO Carbon Power Plate drops weight and adds ventilation without sacrificing stiffness - Soft TX lace guides eliminate pressure and hotspots - BOA® Fit System with dual L6C dials for zonal adjustment - Perforated synthetic leather upper is durable and breathable - Dual density 1:1 footbed is ergonomically designed to provide optimal support, pedaling efficiency and comfort

The latest iteration of our popular Women’s PRO Road shoe offers a slipper-like fit and a high level of stiffness, in a sophisticated package. Perforated synthetic leather is bonded together to form a sleek, strong, and breathable upper, while a pair of BOA® L6C dials give riders the ability to make independent micro-adjustments to the mid and forefoot for a perfect fit. Soft TX lace guides replace the traditional BOA cables to eliminate pressure points and hotspots on the top of the foot. For maximal power transfer, this shoe is built off the 1:1® PRO Carbon Power Plate. It has been carefully designed to concentrate material where it matters most for stiffness, with ventilation zones where it’s not needed. An ergonomically-designed, dual-density footbed provides optimal support, pedaling efficiency, and comfort, so you can go far and go fast. FEATURES: - Women’s-specific fit - Perforated synthetic leather upper is durable and breathable - BOA® Fit System with dual L6C dials for zonal adjustment - Soft TX lace guides eliminate pressure and hotspots - 1:1® PRO Carbon Power Plate drops weight and adds ventilation, without sacrificing stiffness - Dual-density 1:1 footbed is ergonomically designed to provide optimal support, pedaling efficiency, and comfort - 252 grams per shoe (size 42) FABRIC: - Upper: 95% rubber/plastic, 5% textile, Bottom: 98% carbon fiber, 2% steel

The all-new Union BOA® Shoes are set to take your mountain bike adventures to new, more adjustable, and sendier levels of "yew!" Get more power to the pedal and customize your fit to perfection with the dual BOA® Li2 system featured in these trail-ready shoes. Built with robust features including a molded cap design to protect against rock strikes, the Union mountain bike shoes handles the rigors of trail abuse with ease. With a lightweight and precise fit, the low-profile, custom-tuned midsole ratchets up your pedal grip and feel, giving you more comfort while you shred. Power to the pedal is optimized care of the molded internal stiffening plate, but it's not stiffness at the expense of off-bike comfort. Should you have to hike-a-bike around that downed tree, you're all good. The sole is designed using the Ultratac™ rubber compound, with the engineered tread pattern providing best-in-class grip and durability, while the 2-bolt cleat system is compatible with most major clipless pedal suppliers. Versatile and with understated style, Union BOA® Clipless MTB Shoes were born to rip, transitioning from sweet single track to your post-ride tailgate brews with ease. - Clipless mountain bike shoes with Boa® - Dual Boa® Li2 system secure, on-the-fly adjustability - Ultratac™ outsole balances grip and durability - Reinforced toe for protection against rock strikes

XC COMPETITION-LEVEL SHOES INFUSED WITH S-PHYRE DNA. FEATURES - Lightweight SHIMANO ULTREAD XC rubber outsole delivers competition-grade grip that lasts. - Surround wrapping upper structure reduces overlap and provides a glove-like fit. - Rider-tunable spikes allow riders to select and swap spikes to match riding styles and conditions. - Ultra-rigid, lightweight carbon fiber reinforced midsole. - Supple high-density synthetic leather with perforation and lightweight mesh/TPU combination bring superior fit and comfort. - Dual independent BOA® L6 dials allow quick, micro tension adjustments. - Adjustable powerzone lace guide securely holds forefoot. - Low stack height midsole helps stabilize foot, maximizes power transfer and efficiency.

Dial in power and fit The all-new Fox Union BOA® Shoes are set to take your mountain bike adventures to new and more confident levels of you. Get more power to the pedal and customize your fit to perfection with the dual BOA® Li2 system featured in these trail-ready shoes. Built with robust features including a molded cap design to protect against rock strikes, the Fox Union mountain bike shoes handles the rigors of trail abuse with ease. Key Features: - Clipless mountain bike shoes with BOA® - Dual BOA® Li2 system secure, on-the-fly adjustability - Ultratac™ outsole balances grip and durability - Reinforced toe for protection against rock strikes - Exchangeable arch support options