Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts & Accessories

Shimano Alfine S700 Small Parts Kit
$21.99
Add an Alfine hub, cog, spokes, and a rim to this Shimano Internally Geared Hub Small Parts Kit, and you're ready to rock. - Alfine hubs are packaged without small parts and require this kit plus a cog - Nexus hubs are packaged with small parts and cogs and do not require an additional small parts kit - For 11-Speed Hub - Includes CJ-S700 Cassette Joint for Vertical Dropouts *Cassette joint does not fit Di2 Alfine hubs
Shimano 105 5800 Rear Hub Left Cone and Lock Nut Unit
$22.49
-Replacement left side cone and locknut for Shimano 105 FH-5800 rear hub
Spank Spike DH Rear Hub 150/157mm Steel Axle Shaft
$22.99
Replacement Steel Axle Shaft for SPIKE DH R150 Rear Hubs. Compatible with 12x150mm hubs and those already converted to 12x157mm. - Material : Steel - Weight (g): ±81 - Compatibility: SPIKE DH 12x150mm / 12x157mm (converted) Rear Hubs
Stan's NoTubes Rim Tape
$23.99 - $39.99
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3
49°N Replacement Freehub Body for Quick Release Hubs
$24.99
Replacement freehub body for all loose-ball 49N 10mm Quick-Release rear hubs. - 11sp Road compatible freehub body with supplied 1.85mm spacer for full 8/9/10/11sp road & mountain compatibility - Requires axle removal to fit - Weight: 160g
DT Swiss Pro Head Spoke Reinforcement Washers for SPLINE One
$24.99
Pro Head Reinforcement System (PHR) has a larger and more spherical contact area and is designed to balance loads transferred to the rim. The PHR system acts as a ball and socket interface, allowing the spoke to pivot into alignment while maintaining even, consistent contact during installation in order to follow the perfect trajectory from the hub to the rim.
DT Swiss Standard Aluminum Nipples
$24.99 - $66.99
The buyer's choice for wheel builders looking to save weight. The nipples are available with or without DT Pro Lock, a patented liquid inside the nipple thread that makes the connection between the nipple and spoke extremely durable. It pairs perfectly with any wheel, though all-brass nipples are recommended for e-bike use. - Weight: starting at 20g for 64 nipples
Roval Tubeless Valves
$24.99
Roval's rim-specific Tubeless Valves are designed to match Specialized's rim profiles and provide a better seal than previous generation valves. - Constructed of lightweight aluminum - Removable valve core - Mated with a seal which is specific to different rim models: - MY14 Control SL = black rim bed shaped seal - MY15 Control Carbon/Aluminum = red rim shaped seal - MY15 Traverse SL/Aluminum = black O-ring seal
SRAM X0 Hub Conversion Caps
$24.99
SRAM's X0 conversion caps are the ticket for converting your X0 hubs to a different axle type.
Stan's NoTubes Tubeless Valve Stems
$24.99
Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.
Wheels Manufacturing Inc. Freewheel/BB Spacer
$24.99 - $26.99
Machined aluminum spacers for freehubs. Great for fine tuning freewheel and cassette placement or improving chainline. Also good for bottom bracket spacing with BSA BB cups. - Inner Diameter: 35.0mm - Outer Diameter: 40.7mm - Material: Aluminum - Finish: Polished - Bags of 10
49°N Vise Quick Release Skewers
$25.99
A modern take on the classic internal/enclosed cam design as invented by the late, great Tullio Campagnolo. - Internal cam design exerts a far greater vise-like grip vs. external/exposed cam QR lever designs for a more secure fit - Fits both road and mountain bike frames & forks with 100/130/135mm hub spacing - Construction: Chromoly steel skewer with alloy lever and plastic/steel body & acorn-nut - Sold as a front & rear matching pair - Lengths: 133mm (FR) / 169mm (RR) - Weight: 57g (FR) / 61g (RR)
Zipp 77/177 Disc Conversion Caps
$25.99
Wheel Conversion Caps for Zipp 77/177 Disc hubs. Converts your Zipp 77 or 177 hubs to nearly any frame standard.
Stan's NoTubes Neo Replacement Rear Axle
$27.26 - $29.99
Replacement rear axle for Neo and Neo Ultimate hubs. High-precision center-less ground treatment ensures perfect bearing fit.
Kink Universal Freecoaster Guard
$27.50
The Kink Universal Freecoaster Guard is designed to fit with most modern freecoaster hubs. It features a threaded chromoly core that replaces the hubs existing cone nut(s) and also includes a spacing washer for hubs using a wider cone. The nylon guard itself fits over the chromoly core and is injection-molded from ultra-durable nylon material. This guard fits on the non-drive side only.
Spank HEX Boost Rear Hub Alloy Axle Shaft
$27.99
Replacement Alloy Axle Shaft for HEX J-Type and Straightpull Boost 148/141mm Rear Hubs. Compatible with: - HEX J-Type 32H and Straightpull Boost 148mm rear wheels Not compatible with: - Non-Boost HEX rear wheels - SPIKE/OOZY/SPOON hubs
Spank HEX Rear Hub 150/157mm Alloy Axle Shaft
$27.99
Replacement Alloy Axle Shaft for HEX J-Type 150/157mm Rear Hubs. Compatible with: - HEX J-Type 150/157 rear wheels Not compatible with: - Boost or 135/142 rear wheels - SPIKE/OOZY/SPOON hubs
DT Swiss Disc Brake Rotor Adaptor Center Lock/6-Bolt
$28.83
DT-Swiss Center Lock Adaptor. Allows 6-bolt rotors to be used on Center Lock hubs. - Rotor thickness between 1.8mm and 2.2mm - Easy assembly and only 29g - Made in Switzerland by DT Swiss - 230mm version accepts all rotors up to 203mm diameter - 160mm version accepts all rotors up to 160mm diameter
Wheels Manufacturing Inc. Axle-03
$29.00
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Shimano / Japanese rear hubs with 130mm spacing - Type: Hollow Axle - Threads: 10mm x 1 - Diameter: 10mm - Length: 141mm - 1 axle per bag
Lezyne CNC TLR Valve Pair
$29.99
- CNC-machined tubeless valves with aluminum stem nut and valve core wrench cap - Fit for most other tubeless rims and wheel
Shimano Alfine S7000 Cassette Joint Unit
$29.99
Shimano Nexus and Alfine Internally Geared Hub Cassette Joints - Shimano model # CJ-S7000 - Does not include cable fixing bolt unit - OEM cassette joint unit for Alfine SG-S7000-8
Spank HEX 28 Front Hub 12x100 Adapter
$29.99
Replacement 12x100 Adapters for HEX 28 Gravel Front Hubs. Compatible with: - HEX Gravel J-Type Front Wheels Not compatible with: - HEX Straightpull or HEX J-Type 32H Front Wheels - Boost front wheels - SPIKE/OOZY/SPOON hubs - HEX 32 J-Type or 28 Straightpull Front Hubs.
Spank HEX 28 Front Hub 15x100/110 Adapter
$29.99
Adapts HEX 28 Gravel Front Hubs to 15x100. Compatible with: - HEX Gravel J-Type Front Wheels - Compatible with HEX Straightpull 28H Front Wheels - Also compatible as replacement 15x110 adapters for HEX 28 Straightpull Boost Front Hubs. Not compatible with: - HEX 32 J-type Front Hubs - HEX J-Type 32H Front Wheels - SPIKE/OOZY/SPOON hubs
Spank HEX 28 Front Hub QRx100 Adapter
$29.99
Adapts HEX 28 Gravel Front Hubs to QRx100. Compatible with: - HEX Gravel J-Type Front Wheels Not compatible with: - HEX Straightpull or HEX J-Type 32H Front Wheels - Boost front wheels - SPIKE/OOZY/SPOON hubs - HEX 28 Straightpull or HEX 32 J-Type Front Hubs.
Spank HEX 32 Boost Front Hub Boost 20x110 Adapter
$29.99
Adapts HEX 32 J-Type Boost Front Hubs to Boost 20x110. Not compatible with Non-Boost hubs. Not compatible with HEX 28 Straightpull or Gravel Front hubs. Compatible with: - HEX J-Type 32H Boost Front Wheels Not Compatible With: - HEX Straightpull or Gravel Front Wheels (see HEX 28 front hub adapters) - SPIKE/OOZY/SPOON hubs
Spank HEX 32 Front Hub 12x100 Adapter
$29.99
Adapts HEX 32 J-Type F15/20 Front Hubs to 12x100. Compatible with: - HEX J-Type 32H non-Boost Front Wheels Not compatible with: - HEX 28 Straightpull or HEX Gravel Front Hubs - HEX Straightpull or Gravel Front Wheels. (see HEX 28 front hub adapters) - SPIKE/OOZY/SPOON hubs
Spank HEX 32 Front Hub 15x100/110 Adapter
$29.99
Adapts HEX 32 J-Type Front Hubs to 15x100. Compatible with: - HEX J-Type 32H Boost and non-Boost Front Wheels - Also compatible as replacement 15x110 adapters for HEX 32 J-Type Boost Front Hubs. Not compatible with: - HEX 28 Straightpull or HEX Gravel Front Hubs - HEX Straightpull or Gravel Front Wheels. (see HEX 28 front hub adapters) - SPIKE/OOZY/SPOON hubs
Spank HEX 32 Front Hub 20x110 Adapter
$29.99
Adapts HEX 32 J-Type F15/20 Front Hubs to 20x110. Compatible with: - HEX J-Type 32H non-Boost Front Wheels Not compatible with: - HEX 32 J-Type Boost Front Hubs - HEX 28 Straightpull or HEX Gravel Front Hubs. - HEX Straightpull or Gravel Front Wheels. (see HEX 28 front hub adapters) - SPIKE/OOZY/SPOON hubs
Spank HEX 32 Front Hub QRx100 Adapter
$29.99
Adapts HEX 32 J-Type F15/20 Front Hubs to QRx100. Compatible with: - HEX J-Type 32H non-Boost Front Wheels Not compatible with: - SPIKE/OOZY/SPOON hubs - HEX Straightpull or Gravel Front Wheels (see HEX 28 front hub adapters) - HEX 28 Straightpull or HEX Gravel Front Hubs
Spank HEX Rear Hub 10x135 Adapter
$29.99
- Adapts HEX J-Type 135/142 and Gravel Rear Hubs to 10x135. Compatible with: - Compatible with HEX J-Type 135/142 and Gravel Rear Wheels - XD and HG Freehub Bodies Not compatible with: - HEX Straightpull Boost or J-Type Boost Rear Wheels - HEX J-Type 150/157 Rear Wheels - SPIKE/OOZY/SPOON hubs
Spank HEX Rear Hub 12x135/150 Adapter
$29.99
- Adapts HEX J-Type 135/142 and Gravel Rear Hubs to 12x135mm. - Adapts HEX J-Type 150/157 Rear Hubs to 12x150mm. Compatible with: - HEX J-Type 135/142, and 150/157 Rear Wheels - HEX Gravel Rear Wheels - XD and HG Freehub Bodies Not compatible with: - HEX Straightpull Boost Rear Wheels - SPIKE/OOZY/SPOON hubs
Spank Oozy/Spike Front Hub Boost 15x110 Adapter
$29.99
Adapters for Spike/Oozy Boost front hubs. - Material: alloy - Weight (g): 35 - Compatibility: OOZY/SPIKE Boost Front Hubs
Spank Oozy/Spike Rear Hub Adaptors
$29.99
Hub Adapters for all Oozy hubs and 2016 Spike hubs.
Spank Oozy/Spike Rear Hub QRx135 XD Adaptor
$29.99
OOZY/SPIKE Rear Hub QRx135 XD Adaptor - Material: alloy - Weight: 35g - Compatibility: OOZY/SPIKE Front Hubs
Spank Spike DH Rear Hub Adaptor
$29.99
Converts SPIKE DH R150 Rear Hubs to 12x157mm. Compatible only with SPIKE and SPOON (150mm) wheels produced in 2015 or later (with SPIKE hubs). - Material : Alloy - Weight (g): ±14 - Compatibility : SPIKE DH 12x150mm Rear Hubs
Stan's NoTubes Neo OS Front Hub End Caps
$29.99 - $37.99
Front SealLock end caps for Neo OS and Neo Ultimate OS hubs. SealLock end caps feature a low-friction U-cup seal that snaps into place and stays secure even when your wheel is removed from your bike. Not compatible with non-OS hubs or Centerlock hubs.
Stan's NoTubes Neo Rear Hub End Caps
$29.99 - $37.99
Rear end cap conversion kits for NoTubes Neo and Neo Ultimate hubs - SealLock end caps feature a low friction U-cup seal that snaps into place
Zipp Decal Set
$29.99
These die-cut borderless decals provide a distinctive look to go with the distinctive sound and aero-advantage of Zipp wheels rolling at 45km an hour. Zipp’s Matte white and Matte black decals also are still available. Each decal kit has seven decals sufficient to cover one wheel and two matching valve-hole decals. Note: Before applying the decals, make sure the rim surface is free of dirt and debris. We recommend a gentle wipe with acetone or rubbing alcohol. Peel the white backing sheet from the decal, orientate, position and gently press the decal onto the rim surface. Starting at one end, remove the surface clear cover slip and then work the decal into the dimples using a 3M squeegee.
Stan's NoTubes Neo Front Hub End Caps
$30.06 - $31.99
Front end cap conversion kits for NoTubes Neo and Neo Ultimate - SealLock end caps feature a low friction U-cup seal that snaps into place
Stan's NoTubes Neo Front Hub Torque Caps
$31.99
Front RockShox/SRAM-specific Torque-Cap 15mm through-axle SealLock end caps for Neo and Neo Ultimate hubs. SealLock end caps feature a low-friction U-cup seal that snaps into place and stays secure even when your wheel is removed from your bike. Torque-Cap end caps have the same 15mm inside diameter as other systems, but outside diameter is larger (31mm), making these end caps only compatible with Torque-Cap-compatible forks. Note: Torque caps are not compatible with centerlock hubs.
Cinema BMX DR Rear Hub Guard
$34.99
Designed for drive-side use only, the DR rear hub guard presses directly over existing Cinema hub hardware to protect your chain, driver, and hub shell on grinds. Injection molded from super durable nylon material, this guard can handle some serious abuse while still being affordable and easily replaceable. - Material: Nylon - Fits: Cinema FX & FX2 Freecoaster; VX2, VX3, and ZX Cassette Hubs and Wheels (2017 and later) - Side: Drive Side - Weight: 1.1 oz
DT Swiss Squorx Pro Head Aluminum Nipples
$34.99 - $76.99
Ease of use, lightweight, and optimum performance in a single product. The DT Pro Head shape, combined with both a torx and a square tool interface, makes wheel building a lot easier. The spherical contact surface aligns the nipple perfectly with the spoke. All-brass nipples are recommended for e-bike use. Weight: starting at 26g for 64 nipples.
Spank HEX 32 Front Hub Replacement Bearing Kit
$34.99
Bearing Replacement Kit for HEX 32 J-Type Front Hubs. - Includes 2 x #6804 Compatible with: - HEX J-Type 32H front wheels - Not compatible with HEX Straightpull or Gravel front wheels. - Not compatible with SPIKE/OOZY/SPOON hubs.
Wheels Manufacturing Inc. 5mm Axle Spacers, Bag of 20
$34.99
Precision-machined aluminum axle spacers. Great for fine tuning hub spacing or as replacement axle spacers. - Outside Diameter: 16mm - Inside Diameter: 10mm - Thickness: 5mm
DT Swiss Tubeless Ready Rim Tape
$35.01
DT Swiss tubeless-ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type setups. - Durable adhesive tape works as a rim tape and airseal
Stan's NoTubes Alloy Tubeless Valve Stems
$35.99
Stan's lightweight aluminum valve stems are half the weight of Stan's standard brass valves. The secure round base is compatible with most tubeless rims and a perfect fit for all Stan's BST rims. A removable valve core makes adding sealant easy, and these babies fit up to 8mm valve hole. Sold as a pair.
Stan's NoTubes Neo OS Front Hub Torque Caps
$35.99
Front RockShox/SRAM-specific Torque-Cap 15mm through-axle SealLock end caps for Neo OS and Neo Ultimate OS hubs. SealLock end caps feature a low-friction U-cup seal that snaps into place and stays secure even when your wheel is removed from your bike. Torque-Cap end caps have the same 15mm inside diameter as other systems, but outside diameter is larger (31mm), making these end caps only compatible with Torque-Cap-compatible forks. Note: Torque caps are not compatible with centerlock hubs.
WeThePeople Helix Driver Guard
$35.99 - $44.99
When you own a freecoaster as good as the Helix, you're going to want to keep it protected. WTP's Helix driver guards work on the drive side of the Helix freecoaster and replace the cones for a perfect fit without having to spread your dropouts. - Fits Helix V1 and Helix V2 freecoaster hubs - Available in 7075-T6 alloy or Nylon Fiberglass - Comes with heat-treated chromoly adaptor to replace hub cone nuts for perfect fit
WeThePeople Helix Hub Guard
$35.99 - $41.99
When you own a freecoaster as good as the Helix, you're going to want to keep it protected. WTP's Helix hub guards work on the non-drive side of the Helix freecoaster and replace the cones for a perfect fit without having to spread your dropouts. - Fits Helix V1 and Helix V2 freecoaster hubs - Available in 7075-T6 alloy or Nylon Fiberglass - Comes with heat-treated chromoly adaptor to replace hub cone nuts for perfect fit
WeThePeople Supreme Hub Guards
$35.99 - $59.99
Simply replace the cones on your Supreme front and cassette hubs for a perfect fit without having to spread your dropouts. Available in front, rear, and drive side options. These guards now feature a heat-treated chromo insert for longer life.
WeThePeople Supreme Hub Guards
$35.99
WeThePeople's Supreme Hub Guards are made of low-friction nylon fiberglass. Simply replace the cones on your Supreme Front and Cassette Hubs for a perfect fit without having to spread your dropouts. Available for both front and rear. These guards now feature a heat-treated chromoly insert for longer life.
WeThePeople Supreme Rear Bearing Set
$35.99
Did you trash the bearings on your WTP Supreme rear hub? It's okay, that just means you're going big enough to make it count. Fear not, we've got you covered with this bearing set from WeThePeople.
49°N Replacement Freehub Body for Thru-Axle Hubs
$36.99
Replacement freehub body for all loose-ball 49N 12mm Thru-Axle rear hubs. - 11sp Road compatible freehub body with supplied 1.85mm spacer for full 8/9/10/11sp road & mountain compatibility - Requires axle removal to fit instructions available upon request - Weight: 175g
Stan's NoTubes Downhill Rim Strip
$36.99
Stan's Downhill Rim Strip converts standard tubed wheels to tubeless so you can reap the benefits. Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's rim strips create a tight seal with the tire bead, reducing the instances of "burping". Plus, you won't miss dealing with flat tires and you'll save money on tubes!
WTB TCS AL 34mm Presta Valve
$38.99
WTB's TCS AL valves are aluminum to shed grams, and come in catchy anodized red, black, or blue. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch. - Presta - 34mm
WTB TCS AL 46mm Presta Valve
$38.99
WTB's TCS AL valves are aluminum to shed grams, and come in catchy anodized red, black, or blue. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch. - Presta - 46mm
WeThePeople Supreme Front Bearings
$39.99
Did you trash the front bearings on your WTP Supreme front hub? It's okay, that just means you're going big enough to make it count. Fear not, we've got you covered with this bearing set from WeThePeople.
WeThePeople Supreme Hub Pawl Set
$39.99
Supreme Hub Pawl Set, 6 Pieces Including Spring
Wolf Tooth Components Front Boostinator
$39.99
Boostinators are hub specific conversions designed to take non-boost hubs and convert them to boost compatibility. Don't toss out that wheelset - Boostinate it.
Stan's NoTubes Threaded Valve Extenders
$41.99
Stan's Threaded Valve Extenders let you convert deep-section rims to tubeless. They're precision-machined from aluminum and are designed to fit deep-dish carbon and aluminum rims. And, they're threaded on the outside so you can install the Presta lock-ring nut for a perfect seal.
Page 1 of 3 Next page
Live chat by BoldChat