Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts & Accessories

Mavic ITS-4 Freehub Body
Get rolling again with a replacement freehub body for your Mavic wheels. - Freehub for ITS-4 hubs. Also compatible with TS-2 hubs. - Quick engagement 4 pawl design (pawls sold separately)
Mavic Rear Axle Adapter - Quick Release
On today's MTB frames, there are many dropout diameter and width standards. Most Mavic wheels can be fitted with specific adapters to match your wheelset with your frame. - Converts Mavic mountain hubs to quick release - One pair is required for each hub to be converted
Mavic Rear Axle Adapter 12/142 (Center Lock)
On today's MTB frames, there are many dropout diameter and width standards. Most Mavic wheels can be fitted with specific adapters to match your wheelset with your frame. - Converts MTB rear hubs with Center Lock rotor mount to use 12mm axle with 142mm spacing - One pair of adapters required for each hub to be converted
Mavic Rear Axle Adapter 12/142 for 157mm-spaced Deemax
On today's MTB frames, there are many dropout diameter and width standards. Most Mavic wheels can be fitted with specific adapters to match your wheelset with your frame. - Converts Deemax rear hubs with 157mm spacing to use 12mm axle with 142mm spacing - One pair of adapters required for each hub to be converted
Mavic Rear Axle Adapters - QR (Center Lock)
On today's MTB frames, there are many dropout diameter and width standards. Most Mavic wheels can be fitted with specific adapters to match your wheelset with your frame. - Converts Mavic mountain rear hubs to Quick Release - One pair of adapters required for each hub to be converted
Mavic Rear Road Quick Release
Mavic's road quick releases feature a composite lever and Mavic's exclusive cam system. Sturdy and tight, these quick releases allows quick and lightweight wheel fixing.
Mavic TS-2 Freehub Body
Get rolling again with a replacement freehub body for your Mavic wheels. - For Mavic TS-2 hubs - Compatible with Shimano/SRAM 10-speed road or 11-speed MTB cassettes
Profile Design P220 Carbon Specific Brake Pads
$49.99
Profile Design's carbon-specific brake pads are specially formulated to improve braking performance when you're using carbon rims. Profile Design's TwentyFour Series wheels require the use of these P220 carbon-specific brake pads.
Profile Design Twenty-Four Series Quick Release Set
$76.99
Replacement road quick release skewer set (Front and Rear)
Profile Design Wheel Bag
$99.99
Keep your high-dollar road hoops and tires safe from dings, dents and cuts with Profile Design's Wheel Bag. This large padded bag holds both your wheels and has a carrying handle and shoulder strap for easy handling. There's a zipper and Velcro closure to ensure the bag stays closed and your wheels stay safe and protected. Plus, there's a handy interior storage compartment for your quick releases and other wheel accessories and tools.
Profile Design Campagnolo Freehub Body
$159.99
Profile Design's Campagnolo Freehub Body is the part you need to replace the Shimano/SRAM-compatible freehub body that comes stock on your Profile Design Altair or Armada wheels. Once installed on your wheel, the Campagnolo body lets you run Campy 9-, 10-, and 11-speed cassettes (sold separately).
Robert Axle Project Kid Trailer Thru Axle
$124.99
Purchase our Kid Trailer axle for your bike, and share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure. Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet, and cargo trailers such as Thule, Chariot, Burley, Instep, Carry Freedom, and many more. - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The stainless steel axle end allows for mounting of the hitch provided with your trailer. - Hardware for attachment of the hitch is included; the hitch, itself, is not. - No special tools required. Design allows for wheel installation and removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.
Roval Tubeless Valves
$24.99
Roval's rim-specific Tubeless Valves are designed to match Specialized's rim profiles and provide a better seal than previous generation valves. - Constructed of lightweight aluminum - Removable valve core - Mated with a seal which is specific to different rim models: - MY14 Control SL = black rim bed shaped seal - MY15 Control Carbon/Aluminum = red rim shaped seal - MY15 Traverse SL/Aluminum = black O-ring seal
Roval Boost Conversion Kit
$65.00 - $75.00
Convert Roval wheels with 142 or 142+ to be used with Boost spacing (110 /148mm) suspension forks and frames. - Kits include front and rear hub end caps, rotor spacers, and kit specific rotor bolts - Compatible with select MY13-16 Roval Wheels. Choose the appropriate SKU for each wheelset - Each conversion kit requires the existing rear wheel to be re-dished to center. Consult an authorized dealer to perform this operation
SRAM X0 Hub Conversion Caps
$24.99 - $39.00
SRAM's X0 conversion caps are the ticket for converting your X0 hubs to a different axle type.
SRAM Conversion Caps for Roam 50 Wheel (Front)
$65.99
For SRAM Rise-40/60, Roam-50/60 and Rail-50 mountain wheels.
SRAM Conversion Caps for Roam 60 and Rail 50 Wheel (Front)
$79.99
SRAM's Conversion Caps are just what you need to convert your Roam 60 or Rail 50 front wheel to fit your fork.
SRAM XD Driver Body for Rise 60 Wheel
$84.99
XD is a cassette driver body that allows the use of a 10-tooth small cog and provides an improved interface with the cassette on your SRAM Rise 60 wheels. • Driver body design that lets riders tap the power and range of the SRAM 10-42 11-speed Cassette and a 10-tooth small cog • Provides a stable hub connection
SRAM 9-10-11 Speed Freehub Body for 900 Rear Hub
$96.00
Original equipment freehub bodies to fit SRAM hubs and wheels.
SRAM XD Driver Freehub Body for 900 Rear Hub
$104.99
Replacement freehub body for Sram 900 series hubs
SRAM XD Driver Freehub Body for 746 Rear Hub
$106.00
- Original equipment freehub bodies to fit SRAM hubs and wheels. - Includes Drive Side Axle End Cap
SRAM Conversion Cap & XD Driver Body for Roam 60/50 and Rail 50 Wheel
$185.99
Convert your SRAM Roam 60, 50 or Rail 50 wheels to SRAM 11-speed with the XD Driver Body and Axle Cap. XD is a cassette driver body that allows the use of a 10-tooth small cog and provides an improved interface with the cassette. The axle cap is specific to the XD driver and your preferred axle choice.
SRAM Conversion Cap & 9/10-speed Driver Body for Roam 60/50 and Rail 50 Wheel
$187.99
SRAM's Conversion Cap & 9/10-speed Driver Body is just what you need to convert your XD Driver equipped wheel to a standard cassette.
Shimano Alfine SG-S700 Right Hand Dust Cap D
$3.99
Don't let a bent or worn dust cap sully an otherwise well-functioning Shimano Alfine internally geared hub. Get a spare and replace as necessary for continued performance and to preserve the longevity that you expect from Alfine.
Shimano Alfine SG-S700 Left Hub Seal Ring
$4.99
Keeping that well-functioning Shimano Alfine internally geared hub in top working condition means keeping the internals clean. Replace the left hub seal ring when necessary for continued performance and to preserve the longevity that you expect from Alfine.
Shimano Alfine SG-S700 Right Lock Washer Seal
$7.49
Do you need to replace the right lock washer seal on your Alfine SG-S700 internally geared hub? If you're not sure, it might not be a bad idea, as contamination from damaged or worn seals is the kryptonite of virtually maintenance-free internally geared hubs.
Shimano Alfine SG-S700 Oil Port Bolt
$7.99
Keeping contamination out of your internally geared hub is critical to its function and longevity. Sometimes, the oil port bolt comes loose and it's easy to lose, even if you've just taken it out to oil your hub. Keep a spare or two so your hub stays clean inside and it'll last you many, many miles.
Shimano Alfine SG-S700 Right Hand Cone
$12.49
New cones make hubs spin like silk. Take advantage of your Shimano Alfine hub's highly serviceable design, and replace the bearing cones if they are worn or damaged. This one is specifically for the right side.
Shimano Alfine S7000 Cassette Joint Unit
$19.99
Shimano Nexus and Alfine Internally Geared Hub Cassette Joints - Shimano model # CJ-S7000 - Does not include cable fixing bolt unit - OEM cassette joint unit for Alfine SG-S7000-8
Shimano Alfine SG-S700 Left Hand Cone with Dust Cap
$19.99
If the bearings are getting rough on your Shimano Internally Geared hub, it could simply be a matter of replacing a pitted cone and repacking the bearing with grease. - Fits left side of Alfine SG-S700 hubs
Shimano Alfine SG-S700 Right Hand Dust Cap
$21.49
Don't let a cracked or worn dust cap sully an otherwise well-functioning Shimano Alfine internally geared hub. Get a spare and replace as necessary for continued performance and to preserve the longevity that you expect from Alfine.
Shimano Alfine S700 Small Parts Kit
$21.99
Add an Alfine hub, cog, spokes, and a rim to this Shimano Internally Geared Hub Small Parts Kit, and you're ready to rock. - Alfine hubs are packaged without small parts and require this kit plus a cog - Nexus hubs are packaged with small parts and cogs and do not require an additional small parts kit - For 11-Speed Hub - Includes CJ-S700 Cassette Joint for Vertical Dropouts *Cassette joint does not fit Di2 Alfine hubs
Shimano 105 5800 Rear Hub Left Cone and Lock Nut Unit
$22.49
-Replacement left side cone and locknut for Shimano 105 FH-5800 rear hub
Shimano 105 5800 Freehub Body
$73.99
- Cassette Body Type: Shimano/SRAM 11 Speed Road - Material: Steel
Shimano Alfine SG-S700 11-Speed Internal Assembly
$589.99
This is a set of replacement internals for Alfine SG-S700 11-Speed internally geared hubs, allowing you to reuse your old Alfine shell with brand new internals, making it like a new hub. - 187mm axle width
Spank Oozy/Spike Rear Hub 3 Pawl & Spring Kit
$12.99
Replacement Pawls for all Oozy hubs.
Spank Oozy/Spike Rear Hub 135mm/142mm Axle Shafts
$20.99
Replacement axle for all Oozy hubs and 2016 Spike hubs.
Spank Oozy Boost Rear Hub 148mm Alloy Axle Shaft
$22.99
Replacement Alloy Axle Shaft for OOZY Trail Boost R148 Rear Hubs. Not compatible with non-Boost Hub versions. Material: Alloy Weight (g): ±28 Compatibility: OOZY Boost 148 Rear Hubs
Spank Oozy/Spike Front Hub Boost 15x110 Adapter
$29.99
Adapters for Spike/Oozy Boost front hubs. - Material: alloy - Weight (g): 35 - Compatibility: OOZY/SPIKE Boost Front Hubs
Spank Oozy/Spike Rear Hub Adaptors
$29.99
Hub Adapters for all Oozy hubs and 2016 Spike hubs.
Spank Spike DH Rear Hub Adaptor
$29.99
Converts SPIKE DH R150 Rear Hubs to 12x157mm. Compatible only with SPIKE and SPOON (150mm) wheels produced in 2015 or later (with SPIKE hubs). - Material : Alloy - Weight (g): ±14 - Compatibility : SPIKE DH 12x150mm Rear Hubs
Spank Spike DH Rear Hub Bearing Kit
$49.99
More robust bearings for Spike DH hubs.
Spank Oozy/Spike Bearing Kit
$52.99
Replacement bearings for OOZY Trail F15/20 or SPIKE F20/15 Front Hubs. Compatible with all OOZY hubs and wheels. Compatible only with SPIKE and SPOON wheels produced in 2016 or later (with SPIKE hubs). - Material : Steel - Weight (g): Front ±35 Rear ±62 - Compatibility : OOZY/SPIKE Front & Rear Hubs
Spank Spoon 135/150 Freehub Bodies
$89.99
These freehub bodies fit only the older Spoon hubs, not compatible with the new Oozy or Spike hubs.
Spank Oozy/Spike Freehub Bodies
$141.99
Replacement cassette bodies for Oozy hubs and Spike hubs. - Shimano or SRAM - Alloy or Steel
Stan's NoTubes Presta Removeable Valve Core
$3.99
Stan's No Tubes' Presta Removable Valve Core is a replacement valve core for Stan's No Tubes Presta valve stems and Presta valve equipped rim strips.
Stan's NoTubes Neo Hub Spring and Pawl Kit
$12.99
Replacement springs and pawls. Includes 6 pawls, 6 springs and 1 plastic retaining ring that holds the pawls in place even during disassembly to ensure you're never searching the floor for tiny springs.
Stan's NoTubes Pawl and Spring Kit
$14.99
The kit contains 3 pawls and 3 springs. Compatible with all Stan's Hubs. Very durable and with normal uses will last the life of the hub.
Stan's NoTubes Rim Tape
$23.99 - $39.99
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3
Stan's NoTubes 3.30/3.30Ti Hub Kit
$24.99 - $29.99
Stan's 3.30/3.30Ti Hub Kit converts Stan's 3.30 front hubs from quick-release to through-axle compatible. Installation is easy—just pull the old ones off and put the new ones on. Conversion kits available in 12mm and 15mm.
Stan's NoTubes Tubeless Valve Stems
$24.99
Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.
Stan's NoTubes Neo Replacement Rear Axle
$27.26 - $29.99
Replacement rear axle for Neo and Neo Ultimate hubs. High-precision center-less ground treatment ensures perfect bearing fit.
Stan's NoTubes Neo Front Hub End Caps
$29.99 - $31.99
Front end cap conversion kits for NoTubes Neo and Neo Ultimate - SealLock end caps feature a low friction U-cup seal that snaps into place
Stan's NoTubes Neo Rear Hub End Caps
$29.99 - $35.99
Rear end cap conversion kits for NoTubes Neo and Neo Ultimate hubs - SealLock end caps feature a low friction U-cup seal that snaps into place
Stan's NoTubes Neo Front Hub Torque Caps
$31.99
Front RockShox/SRAM-specific Torque-Cap 15mm through-axle SealLock end caps for Neo and Neo Ultimate hubs. SealLock end caps feature a low-friction U-cup seal that snaps into place and stays secure even when your wheel is removed from your bike. Torque-Cap end caps have the same 15mm inside diameter as other systems, but outside diameter is larger (31mm), making these end caps only compatible with Torque-Cap-compatible forks. Note: Torque caps are not compatible with centerlock hubs.
Stan's NoTubes Neo OS Front Hub End Caps
$31.99 - $34.99
Front SealLock end caps for Neo OS and Neo Ultimate OS hubs. SealLock end caps feature a low-friction U-cup seal that snaps into place and stays secure even when your wheel is removed from your bike. Not compatible with non-OS hubs or Centerlock hubs.
Stan's NoTubes Alloy Tubeless Valve Stems
$35.99
Stan's lightweight aluminum valve stems are half the weight of Stan's standard brass valves. The secure round base is compatible with most tubeless rims and a perfect fit for all Stan's BST rims. A removable valve core makes adding sealant easy, and these babies fit up to 8mm valve hole. Sold as a pair.
Stan's NoTubes Neo OS Front Hub Torque Caps
$35.99
Front RockShox/SRAM-specific Torque-Cap 15mm through-axle SealLock end caps for Neo OS and Neo Ultimate OS hubs. SealLock end caps feature a low-friction U-cup seal that snaps into place and stays secure even when your wheel is removed from your bike. Torque-Cap end caps have the same 15mm inside diameter as other systems, but outside diameter is larger (31mm), making these end caps only compatible with Torque-Cap-compatible forks. Note: Torque caps are not compatible with centerlock hubs.
Stan's NoTubes Downhill Rim Strip
$36.99
Stan's Downhill Rim Strip converts standard tubed wheels to tubeless so you can reap the benefits. Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's rim strips create a tight seal with the tire bead, reducing the instances of "burping". Plus, you won't miss dealing with flat tires and you'll save money on tubes!
Stan's NoTubes Threaded Valve Extenders
$41.99
Stan's Threaded Valve Extenders let you convert deep-section rims to tubeless. They're precision-machined from aluminum and are designed to fit deep-dish carbon and aluminum rims. And, they're threaded on the outside so you can install the Presta lock-ring nut for a perfect seal.
Page 1 of 3 Next page
Live chat by BoldChat