Filter By:
Parts & Accessories

$59.99
The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy.
- Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers.
- No tangled wires on your bike to connect the sensor to your device.
- It only weighs 7 grams!
- Provides accurate cadence data during your ride
- (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties.
- The RPM can be worn on your shoe for spin classes or use with multiple bikes
- Two LED lights show the sensor's device connection (blue) and cadence detection (red)
- No charging required! Operates on a coin cell battery for up to 1 years.
- RPM cadence sensor will fit with most bikes and frame sizes

$59.99
The Wahoo RPM speed sensor is the sleek, magnet-less solution for capturing cycling speed data. It easily mounts to your bike's front wheel hub, and the Bluetooth Smart and ANT+ dual band technology allow you to connect to and display data on both smartphones and bike computers. Tracking speed data has never been this easy.
- Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers.
- No tangled wires on your bike to connect the sensor to your device.
- The RPM speed installs easily with no magnets required
- It only weighs 16.5 grams with the mount included
- Provides accurate speed data during your ride
- Mounts on most front wheel hub with a secure silicone casing
- Two LED lights show the sensor's device connection (blue) and speed detection (red)
- No charging required! Operates on a coin cell battery for up to 1 years.
- RPM Speed will fit with most bikes and frame sizes

$114.99
All you need for cycling data, all together at once! The Wahoo RPM Speed and Cadence sensors are both a sleek, wireless, and magnet-less solution. Each mounts easily to your bike and the Bluetooth Smart and ANT+ duel band technology allows you to connect and display data on both smartphone and bike computers.
- Dimensions (LxWxH): 1.25" x.75" x 1"
- Weight: 7 grams (without mount)
- Battery: CR2032
- Battery Life: Up to 12 months
- Water Rating: IPX7 (waterproof up to 5 ft)
- Wireless Signal Strength: Up to 10 feet
- Note: Speed Sensor is NOT compatible with spin bikes

$79.99
This handlebar bracket has been developed so you can attach a tablet to your handlebars. The design provides a safe distance so that no sweat falls on the screen while you are training.
- Suitable for handlebars with a diameter ranging from 26mm to 35mm
- Adjustable to different tablet sizes: length 182-267mm, width 112-197mm, max. thickness 13mm

$24.99
The Accessory mount was developed as a flexible solution for mounting tubes to your frame. The various mounting solutions allow for bottle cage mounting, frame mounting and it will also work with our Direct mount saddle system. Simply select your mounting and adapt the mount (using the suggested cut points where relevant) to fit.
- Glass Fiber reinforced Nylon mounting bracket - textile strap
- Frame bracket offering the possibility to mount accessory like an inner tube, tool, jacket, etc from your bike frame thanks to Velcro strap attachment
- The bracket can be screwed on frame rivets or shortened then mounted with zip-ties on frame tubes
- Also compatible with Syncros Direct Mount Saddles through their threaded inserts
- Weight: 23g approx.

$1,699.99
This custom Li-Ion Turbo Vado Battery features a 604Wh capacity and is compatible with all Turbo Vado models. It's fully integrated with the frame, removable for easy charging and lockable for added security.
- Please Note: The Turbo Vado Battery does not include a battery cover.
- Battery features a 604Wh capacity.
- Works with all Turbo Vado models.
- Lockable and down tube integrated.
- Chargeable either on- or off-the-bike.
- Includes LED power indicator.

$224.99
- Di2 internal battery, fits all e-Tube Di2 groups
- Capacity: 500 mAH (± 2000km)
- Use with EW-WU101 or SC-MT800 interfaces/junction to gain BlueTooth Smart wireless connectivity for on-the-fly adjustments with smartphones and tablets
- Requires SM-BCR2 charger

$244.99
The new DN300 Built-In type battery features the same waterproof design that Di2 users have loved for generations. Now with 3 ports, it delivers stable power to Shimano's 12-speed road derailleurs (and shifters if a fully wired option is selected).
- Compatible with thinner next-generation electric wire SD300 and systems after R9250/R8150 series
- Li-Ion type
- Capacity: 500 mAH |3.7Wh (± 2000km autonomy)
- Rated voltage: 7.4V
- Charges through RD-R9250 |RD-R8150 rear derailleur using EW-EC300 Di2 Charging Cable (sold separately)
- Fixing small parts included
- Weight: 52g

$109.99
Shimano BT-R1A External Di2 Battery
- All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions
- Use Di2 system checker to update component firmware
- Di2 External Battery, battery charger, and power cable are universal between Dura-Ace 9070, 7970, Ultegra 6870, 6770 and Alfine Di2 systems
- Battery weight: 71 grams

$134.99
- EW-WU111 D-Fly wireless transmitter
- Shifting customization, system diagnosis and firmware updates can now be done through Bluetooth Smart on smart phones and tablets, using the eTube app
- Also allows to send shifting and system data to compatible cycle computers via private ANT+ protocol
- Requires BT-DN110 internal battery or BM-DN100 external battery mount

$70.99
SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes just 45 minutes to complete.
- Finish: Black
- Compatibility: SRAM RED eTap

$86.99
SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs.
- Up to 1000 kilometers of riding per charge
- Weight: 24g
- Finish: Black
- Compatibility: SRAM RED eTap

$59.99 - $64.99
The K-EDGE Garmin Stem Mount is a great upgrade solution for cyclists who prefer their computer above the stem. Mounting off of the steerer tube, the mount replaces a standard 5mm spacer, and is locked securely in place by the top cap compression system.
The adjustable version allows for a variety of different stem angles. Can be used with positive or negative degree stems and additional spacers can be added (5mm to 10mm) above the stem. Note that some of the larger computers will not always work with a steep angled stem.
Designed with mountain biking in mind, the K-EDGE Stem mount is also ideal for much more including: cyclocross; triathlon; bike touring; or if you simply prefer this position for your computer.

$76.99
- CNC Machined Aluminum
- Combo Compatible (K13-580 adapter sold separately)
- GARMIN approved replaceable computer insert protects computer tabs
- Anodized Black with laser etched logos
- Payload Capacity: Top 123g / Bottom 242g with combo adapter
- Weight- 47g
Compatibility:
- GARMIN Cycling Computers smaller than EDGE 1000, 1030 style (example EDGE 820)
- Combo compatible (GoPro-style light/camera interface) K13-580-BLK adapter sold separately

$76.99
- CNC Machined Aluminum
- Combo Compatible (K13-580 adapter sold separately)
- GARMIN approved replaceable computer insert protects computer tabs
- Anodized Black with laser etched logos
- Payload Capacity: Top 123g / Bottom 242g with combo adapter
- Weight- 50g
Compatibility:
- All Garmin Cycling Computers
- Combo (GoPro-style light/camera interface) adapter compatible (K13-580-BLK sold separately)

$42.99
The K-EDGE Gravity Top Cap is a great computer mount for those mountain riders that already a lot going on with the cockpit of their bikes, or just want a simple and sleek looking computer mount. The Top Cap replaces your already existing top cap with the K-EDGE Gravity top cap. Ideal position for Downhill and Enduro racing/riding, but is also a popular solution for any bike when using a smaller style computer (20, 25, 200, 500, 510, 520, 820).
- CNC Machined 6061-T6 Aluminum Platform, Injection Molded Garmin Specific Co- Polymer Interface
- Compatibility: All Garmin Edge® Computers including the 1030*, 1000*, 820, 810*, 800*, 510, 520, 500, 200, 25, 20. Also supports the Touring, Touring Plus, Forerunner 310XT, and 910XT. (Larger EDGE computers such as 800, 810, 1000, 1030 may interfere with very steep, upright, stem angles.)
- Made in Boise, Idaho, USA.
- Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.

$79.99
At 32 Grams the Race Mount is 33% lighter than the “standard” Wahoo Mount.
- CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface
- Compatibility: Wahoo Bolt, Wahoo Mini
- Fits Handlebars: 31.8MM
- NOT GoPro Compatible
- Anodized Color: Black
- Made in Boise, Idaho, USA
- Lifetime Guarantee against material or manufacturer defects. Damages due to abuse or crashing excluded.
* Attention: ASSEMBLY BOLTS NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME.
The torx head bolts are installed using a permanent thread-lock compound. Doing so will void all warranties.
Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Sigma instructions that recommend use of the provided tether leash.

$99.99
The NEW K-EDGE Computer Mount for the NEW Wahoo Bolt is the most secure cycling computer mount available. Lock your Bolt in place with confidence. Aero design flush with the top of the handlebar.
- CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface
- Compatibility: Wahoo Bolt, Wahoo Mini
- Fits Handlebars: 31.8MM
- Go Pro Action Camera type attachment for camera or light
- Anodized Color: Black
- Made in Boise, Idaho, USA
- Lifetime Guarantee against material or manufacturer defects. Damages due to abuse or crashing excluded.
* Attention: ASSEMBLY BOLTS NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME.
The torx head bolts are installed using a permanent thread-lock compound. Doing so will void all warranties.
K-EDGE Combo Mount are NOT DESIGNED to hold a Cycliq Fly 12. (Cycliq Fly 12 & Fly12CE users should choose the K-EDGE K13-410, K13-420, K13-2450 GO BIG camera/light mounts.)
Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Sigma instructions that recommend use of the provided tether leash.

$47.99
K-EDGE’s legendary CNC machined aluminum quality and strength for the price conscious cyclist. Pro positioning of your computer, out-front and flush with the top of the handlebar.
- CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface
- Compatibility: Wahoo Bolt
- Fits Handlebars: 31.8MM
- NOT GoPro Interface Compatible
- Anodized Color: Black
Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Sigma instructions that recommend use of the provided tether leash.

$54.99
Monitor your speed as you ride with this easy-to-install wireless sensor. With no magnets or other exposed parts to line up, this sensor is easy to install, maintain and move between bikes.
The speed sensor 2 attaches to the hub of either wheel. You can set up wheel size in our Garmin Connect online community or self-calibrate with an Edge cycling computer or compatible Garmin device. Once set up, you’ll get accurate speed and distance at all times — even without a head unit.
ANT+ connectivity and BLUETOOTH Low Energy technology let you sync to Garmin Connect and other training apps, compatible devices and fitness equipment for better data when you ride indoors and outdoors.

$95.99
Monitor your speed and cadence as you ride with these easy-to-install wireless sensors. With no magnets or other exposed parts to line up, these sensors are easy to install, maintain and move between bikes.
The speed sensor 2 attaches to the hub of either wheel and self-calibrates with your Edge cycling computer or compatible Garmin device to give you accurate speed and distance at all times — even without a head unit.
The cadence sensor 2 fastens to any size crank arm and measures pedal strokes per minute so you can get the most out of your training.
Send live speed, distance and cadence data to compatible training apps or displays by using ANT+ connectivity and BLUETOOTH Low Energy technology.
With both of these sensors on your bike, you can work to improve your personal best or see where you stand against the pros.

$54.99
Monitor your pedaling cadence as you ride with this easy-to-install wireless sensor. With no magnets or other exposed parts to line up, this sensor is easy to install, maintain and move between bikes.
Simply attach the sensor and ride. With no magnets or other exposed parts to line up, this sensor is easy to install, maintain and move between bikes.

$51.99
Stay ahead of the pack with Garmin's Out-front Bike Mount that lets you to take full advantage of your Edge's capabilities without compromising your ride. The mount positions your device for easier monitoring and safety. Also compatible with the Forerunner 910XT and 310XT when used with a quick-release kit (sold separately).

$12.99
Mount your Garmin Edge computer with the Quarter Turn Bike Mount. It includes the bike mount, rubber disc, and elastic bands to secure the Quarter Turn to your stem or handlebars.

$139.99 - $155.99
The Bosch Purion is a minimalist on-board computer designed for anyone who wishes to focus on the most important information and prefers an uncluttered handlebar. The Purion displays the essentials and lets riders get all important information with a click of the thumb, while keeping hands on the handlebars. Five different riding modes provide just the right amount of assistance in every situation.
- Manages four levels of assist from Eco to Turbo, with an eMTB mode specially designed for the Performance Line CX Drive system
- Features include charging status, speed, riding mode, range, trip distance and total distance

$111.99
Zipp's QuickView Integrated stem faceplate computer mount provides an efficient fix for an emerging challenge on modern bikes: system integration. This new mount doubles as the stem faceplate for a clean look that securely holds your cycle computer and a light or camera. No more multiple mounts bolted on here and there. The mount sits in front of your Zipp stem, positioning it for easy viewing and access. This is an easy way to add elegant integration to your road bike.
- Computer compatibility: Garmin, Wahoo
- Accessory compatibility: GoPro
- Lights: Niterider Lumina Series (with adapter), Light and Motion, Bontrager (with adapter), Gloworm (with adapter), Lezyne (with adapter), Infini (with adapter), Sigma Sport
- Lifetime warranty

$109.99
Zipp's QuickView Integrated stem faceplate computer mount provides an efficient fix for an emerging challenge on modern bikes: system integration. This new mount doubles as the stem faceplate for a clean look that securely holds your cycle computer and a light or camera. No more multiple mounts bolted on here and there. The mount sits in front of your Zipp stem, positioning it for easy viewing and access. This is an easy way to add elegant integration to your road bike.
- Computer compatibility: Garmin, Wahoo
- Accessory compatibility: GoPro
- Lights: Niterider Lumina Series (with adapter), Light and Motion, Bontrager (with adapter), Gloworm (with adapter), Lezyne (with adapter), Infini (with adapter), Sigma Sport
- Lifetime warranty

$36.99
Low Road position places the computer in front of the bar and nearly flush with the top of the bar, making for an easy to read display whether you are on the hoods or in the drops.
- Sub-20 gram computer mount
- Compatible with computers with 1/4 turn twist lock interface and 31.8mm bar surface
- Single Torx T25 fixing bolt
Page 1 of 5
Next page