Cranksets

Wheels Manufacturing BB30 Bottom Bracket Adaptor for Hollowtech II Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.

The new Gen 3 single-sided Stages Power L meter is built on to a non-drive-side Stages Carbon crank arm and it compatible with SRAM GXP MTB drivetrains (168mm Q-factor). Stages Power MTB. Power isn't just for roadies. Stages Power meters are ridden by world and national champions in every discipline of cycling. From weekend warriors to BMC Factory Racing, Trek Factory Racing XC and Olympian Chloe Woodruff, Stages Power for MTB is ridden by the best athletes in the world. Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the data produced by our system. Additional features: - ± 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Specifications - Power meter housing: low profile design, with robust door interface - Weight: Only adds 15g to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter - Power range (Watts): 0 to 5000 - Cadence range (rpm): 10-220 - Water resistance rating: IPX7 In the box - Power Meter - High quality CR2032 coin cell battery - Lifetime access to Stages Link for power meter management and firmware upgrades. - 2 months free access to Stages Link premium training and coaching features. - Product Identification Card with Serial Number and ANT+ I.D. Number. - User Guide

The new Gen 3 single-sided Stages Power L meter is built on to a non-drive-side Stages Carbon and built to retrofit SRAM (road and mountain), Race Face, and Easton cranks with Stages Power, with added spindle purchase. No additional spindle purchase required for FSA 386EVO cranks. This one Stages Power meter is built to rule them all—all of the most popular 30mm spindled crank sets, that is. Interchangeable 30mm spindles bring Stages Power carbon to numerous popular crank sets. In order to fit a vast array BB30 based crank sets—including, SRAM, RaceFace, and Easton, as well as FSA’s 386EVO —Stages' engineers have developed a range of bottom bracket spindles that serve to mate our super-light carbon Stages Power meter to more than 10 different 30mm spindled crank sets. Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the data produced by our system. Additional features: - ± 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Specifications - Power meter housing: low profile design, with robust door interface - Weight: Only adds 15g to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter - Power range (Watts): 0 to 5000 - Cadence range (rpm): 10-220 - Water resistance rating: IPX7 In the box - Power Meter - High quality CR2032 coin cell battery - Lifetime access to Stages Link for power meter management and firmware upgrades. - 2 months free access to Stages Link premium training and coaching features. - Product Identification Card with Serial Number and ANT+ I.D. Number. - User Guide

Shimano Acera FC-M361 cranksets feature sturdy construction, reliable shifting, and replaceable chainrings. - Spindle Interface type: Square Taper JIS

- Octalink bolts include steel washers, JIS includes black plastic caps - HT2 mount bolts (low torque plastic, except XTR-M970 aluminum) are for mounting non-drive arm - Hollow bolts (SH-21504) not recommended for non-treated spindles

The Shimano Dura-Ace FC-R9200 crank performs two vital functions; transferring your pedaling effort into the drivetrain and ensuring the fastest, most precise front shifting available. With HOLLOWTECH II crank arms to ensure light weight and Shimano's class-leading chainring designs, the FC-R9200 won't let you down. - Optimal balance of stiffness, strength, weight and rotational performance - HOLLOWGLIDE structure cuts weight yet maintains strength for better power transfer and quicker, more precise front shifting - 148mm Q-factor - 44.5mm chainline

- 2-PIECE CRANKSET for 157 mm O.L.D. frames - DYNAMIC CHAIN ENGAGEMENT+ improves chain engagement and retention - Q-factor 181 mm - Direct mount chainring - Chain Line 56.5 mm - 1x12-speed

Big air, pure speed, and total concentration: the DH world in a nutshell. It's a world where line choices are made in the blink of an eye, absolute faith in your gear is a must, and Shimano's Saint Crankset is ready to answer the call every time. Ultra-wide bottom bracket bearing spacing and hollow-forged crank arms are used for maximum rigidity and strength under demanding conditions, and a steel pedal insert adds even more burl. A single chainring keeps things simple and durable up front so you can focus on the ride, and not a dropped chain. See you at the bottom. - English threaded Shimano Hollowtech II BB included

An integral part of the Shimano Ultegra 12-speed road lineup, the FC-R8100 crankset builds upon Shimano's legendary front shifting and transmission efficiency. With new refinements for seamless 12-speed shifting, the Ultegra crank is now offered in a wide variety of lengths, bringing performance and improved fit for smaller riders, triathletes, and riders with specific biomechanic requirements. - Optimal balance of stiffness, strength, weight and rotational performance - Hollowglide structure cuts weight yet maintains strength for better power transfer and quicker, more precise front shifting - 148mm Q-factor - 44.5mm chainline

- BCD: Direct Mount Shimano - Chainline: 55mm - Crank Arm Length: 170mm - Material: Aluminum - Interface: Hollowtech II - Speed: 11/12 - Crank Spindle Diameter: 24mm - Drivetrain Spacing: SuperBoost+ - Pedals Thread: 9/16''

Super strong and ultra durable, Shimano's ZEE Cranks are tailor-made for aggressive riders, DHers and dirt jumpers that don't have endorsement deals. They use a 2-piece design with solid aluminum arms as well as a steel axle and steel pedal inserts for longevity. Stiffness was put at a premium, so if you need to stomp on the pedals to get up to speed quickly, or if you're a Clydesdale who punishes lesser cranksets, ZEE has your back. It's 10-speed compatible and is equipped with a 36-tooth chainring. The bottom bracket is included, too.

SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly intact. - For Descendant Carbon and non-Eagle XX1 and X01

The SRAM RED crankset leverages a pivotal design innovation: smaller chainrings and a wider cassette range. This leads to smoother and faster shifting up front and more useful gearing for today's riders. The new configurations improve cadence and efficiency while also delivering shifts that are crisp, clean and quick-every time. Features - X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear - Improved front shifting performance for crisp and accurate front shifts - Unique chainring design results in a lighter weight, stiffer, more durable crankset - DUB bottom bracket adds durability, simplicity and broad compatibility - Power upgradeable Specifications - Speeds: 12 - BB Compatibility: All SRAM Road DUB BBs, GXP/PF GXP 68mm - Chainring Size: 46/33, 48/35, 50/37 - Crank arm length: 165mm, 167.5mm, 170mm, 172.5mm, 175mm - Chainline: 45.0mm - BB Spindle Interface: 24mm, DUB - Chainring material: Aluminum - Guard: No Guard - Bolt Circle Diameter (BCD): Direct Mount (DM) - Crank arm material: Carbon

Designed to handle whatever you can throw at it. Aluminum crankarms in a wide range of lengths and the DUB bottom bracket system mean the Rival crankset will keep spinning, no matter what. A tight and consistent 13-tooth gap between chainrings makes for accurate and dependable shifting. - X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear - Crisp and accurate front shifts - DUB bottom bracket adds durability, simplicity, and virtually universal frame compatibility - BB not included

The Race Face Aeffect crank is designed to handle aggressive trail riding at XC crank weight and an attractive price point. Features the CINCH system with its interchangeable spider options and a 24mm EXI interface spindle. - Crank arms forged from 6066 aluminum - Compatible with all CINCH direct mount rings and spiders to easily convert between existing chainring standards - Compatible with direct mount, 1x, 2x with - and without bash, and 3x configurations - 24mm EXI spindle compatible with Race Face X-Type bottom brackets or Hollowtech II compatible bottom brackets - CINCH removable spiders and direct mount rings utilize a 20-tooth ISIS cup BB tool for removal and installation - Bottom bracket sold separately

The RaceFace Aeffect R crankset offers enduro-rated strength in a lightweight XC-style package, making it a solid and dependable crankset choice. - Its forged 7050 AL construction optimizes stiffness without added weight - The Aeffect R features the versatile CINCH system for plenty of interchangeable spider options - Can run alloy or steel CINCH direct mount chainrings - Boost-compatible 24mm EXI interface spindle - Direct mount chainline: 51mm / 57.5mm (Flipped Ring) - 2X Cinch spider chainline: 49.5mm - Boost 2X Cinch spider chainline: 52.5mm - Number of Chainrings: No Rings, No Spider Included - Chainline/Hub Compatibility: 135/142 MTB Hubs, 141/148 Boost Hubs, 150/157 DH Hubs - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Spindle Interface Type: RaceFace EXI - Chainring BCD: Direct Mount CINCH - BB Included: No - Chainring Included: No

Spindle and hardware kit for Race Face CINCH MTB and fatbike cranks.

RaceFace CINCH Spindle - Fits 150/157mm Hub Spacing

The Easton EA90 aluminum crankset is optimized for gravel, cyclocross, and road riding styles. It offers the versatility of the CINCH system for a variety of gearing combinations. - EA90 alloy crank arms are lightweight and feature a matte black anodized finish - CINCH direct mount technology is compatible with both 1x and 2x setups - CINCH power meter compatible - Bottom bracket and chainrings sold separately - Number of Chainrings: No Rings, No Spider Included - Chainline/Hub Compatibility: 130 Hubs, 135/142 Road Disc Hubs > 415 mm Chainstay, 135/142 Road Disc Hubs < 415 mm Chainstay - Crank Intended Use: Cyclocross, Gravel, Road - Pedal Spindle: 9/16" - Spindle Interface Type: RaceFace/Easton CINCH - Drivetrain Speeds: 10, 11 - BB Included: No

Easton spider and ring assemblies for CINCH cranks.

Defy the norms. The hollow Si crankset, paired with the any SpideRing, is an impressive upgrade for any mountain or road bike. Where it thrives: Challenging trails, the open road, up and down hills What it's built for: Durability, efficiency Highlights: - Compatible with all SpideRings and HollowGram spindles - Self extracting bolts for easy removal - 172g/arm including hardware

Defy the norms. The hollow Si crankset, paired with the any SpideRing, is an impressive upgrade for any mountain or road bike. Where it thrives: Challenging trails, the open road, up and down hills What it's built for: Durability, efficiency Highlights: - Compatible with all SpideRings and HollowGram spindles - Self extracting bolts for easy removal - 172g/arm including hardware

These spiders are optimized to fit Cane Creek's eeWings All-Road cranks, adding more versatility for riders. The spiders will allow direct-mount cranks, such as the eeWings, to accommodate 110 BCD chainring so riders can expand their gearing options. - Allows riders to run 2x drivetrain configurations with a smaller 32T chainring - CNC high grade 7075 series aluminum - Anodized titanium-gray finish

- Bash guard protects chainring from logs, rocks and other trail hazards - Designed and manufactured in the USA from 7075-T6 aluminum alloy - See wolftoothcycling.com for mounting tips - 51g (26-30t)

Protect your 1x investment with this bashguard designed for Shimano Symmetrical 96 BCD cranksets. - Only compatible with symmetrical 96 BCD cranks - Made from aluminum alloy

The Wolf Tooth CAMO BashSpider is a crankset-mounted boost bash ring. This is a spider with an integrated bash ring for use with direct mount cranksets. The CAMO BashSpider pairs with a CAMO chainring to complete the CAMO System. - A CAMO chainring is required to complete this system - The "rolling" ability of the BashSpider allows the rider to move easily over obstacles - Bash rings that are mounted on the crankset are better supported than bash rings that are mounted to the frame or bottom bracket - M5 (minus 5mm - Boost) is dished towards the frame for 52mm chainline for bikes with Boost spacing - Will fit CAMO chainrings from sizes 28T-34T round or 30T-32T elliptical - Includes mounting bolts - Designed to work with the Race Face Cinch cranksets that have a removable spider

CAMO Spider - Made from Aluminum alloy for light weight - Includes 5 black chainring bolts

Wolf Tooth's CAMO stands for Chainline and Material Optimization. Available in various chainlines and spider configurations, CAMO spiders allow the use of previously unavailable chainring styles, materials, and chainlines in a lightweight, modular, and customizable package. These spiders are for use with the RaceFace cranksets that have removable Cinch spiders/chainrings and are only compatible with CAMO rings and bolts. Three different chainline options are available. The number and letter refer to the mm offset and direction from the mounting face to the centerline of the teeth: - M8 (minus 8mm - dished toward the frame): For 49mm chainline, used with GXP and long-spindle BB30 cranks. Designed for bikes with 135mm QR, 142mm thru axle, and some 148mm bikes. - M5 (minus 5mm - dished toward the frame): For 52mm chainline (Boost) - P2 (plus 2mm - dished outward away from the frame): For fat bikes that have 190/197 rear spacing but use a 100mm-spindle crank

Wolf Tooth's CAMO stands for Chainline and Material Optimization. Available in various chainlines and spider configurations, CAMO spiders allow the use of previously unavailable chainring styles, materials, and chainlines in a lightweight, modular, and customizable package. These spiders are for use with the SRAM cranksets that have removable Direct Mount spiders and are only compatible with CAMO rings and bolts. Four different chainline options are available. The number and letter refer to the mm offset and direction from the mounting face to the centerline of the teeth: - M8 (minus 8mm - dished toward the frame): For 49mm chainline, used with GXP and long-spindle BB30 cranks. Designed for bikes with 135mm QR, 142mm thru axle, and some 148mm bikes. - M5 (minus 5mm - dished toward the frame): For 52mm chainline (Boost) - M2 (minus 2mm - dished toward the frame): For 49mm chainline on short-spindle BB30 cranks - P2 (plus 2mm - dished outward away from the frame): For fat bikes that have 190/197 rear spacing but use a 100mm-spindle crank. Can also be used to achieve a Boost chainline with a short-spindle BB30 crank.

Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranks. - 29mm I.D. - 2.5mm thick - 5 spacers per bag - Machined engineering-grade Delrin