Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts & Accessories

$54.99
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many tandem hubs - Type: Solid Axle - Threads: 10mm x 1 - Diameter: 10mm - Length: 187mm - 1 axle per bag

$2.99 - $12.99
Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels.
- 14mm x 1mm (1411-AN) sold in pairs
- All others sold individually

$23.99 - $39.99
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims.
21mm width fits:
- ZTR Olympic
- ZTR Iron Cross
- ZTR 355
- ZTR Alpine
- ZTR Crest
- ZTR Alpha 340 (2 layers)
- ZTR Alpha 400 (2 layers)
- Most road clincher rims
25mm width fits:
- ZTR 355 (26", 650b, 29")
- ZTR Crest
- Crest MK3
- ZTR Arch EX
- ZTR Flow EX
- Crest S1
27mm width fits:
- ZTR Flow EX
- ZTR Bravo
- ZTR Hugo 52mm
- Arch S1
- ZTR Rapid 28
- ZTR Rapid 30
- Arch MK3
30mm width fits:
- ZTR Flow MK3

$39.99
Stan's Threaded Valve Extenders let you convert deep-section rims to tubeless. They're precision-machined from aluminum and are designed to fit deep-dish carbon and aluminum rims. And, they're threaded on the outside so you can install the Presta lock-ring nut for a perfect seal.

$24.99
Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant.
Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads:
- MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi
- ERD 615, 622x49.9, 29 in x 52.3mm
Your rim has a stepped valve and is not compatible with this Schrader valve.

$27.99
Spank Pawl and Spring Replacement Kits
- Kit to service Spank rear hubs
- Fits Spank Spike/Spoon or Oozy rear hubs
- Fits HEX Micro Spline Hubs

$3.99
Don't let a bent or worn dust cap sully an otherwise well-functioning Shimano Alfine internally geared hub. Get a spare and replace as necessary for continued performance and to preserve the longevity that you expect from Alfine.

$74.99
Convert Roval wheels with 142 or 142+ to be used with Boost spacing (110 /148mm) suspension forks and frames.
- Kits include front and rear hub end caps, rotor spacers, and kit specific rotor bolts
- Compatible with select MY13-16 Roval Wheels. Choose the appropriate SKU for each wheelset
- Each conversion kit requires the existing rear wheel to be re-dished to center. Consult an authorized dealer to perform this operation

$82.99
After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle, we needed a better option.
Our Lightning Bolt-On thru axles offer a high-quality, simple, lightweight alternative to that bulky handle. Available in a range of sizes that fit both front and rear wheels on all types of thru-axle-equipped bikes.
- Lightning is Better—Our front and rear Lightning Bolt-On axles offer a stronger, more durable, lower profile, and lighter weight option to replace your stock thru-axles.
- Low Profile—No more bulky handles to strike trail obstacles or create wind drag. Aerodynamic design.
- Light Weight—Our axles are internally bored to remove unnecessary material without compromising strength.
- Easy to install—Our matching front and rear Lightning Bolt-On Axles require only a standard 6mm hex wrench for easy installation and removal.
- Better Tolerances—Manufactured in the USA to the tightest tolerances using aerospace materials and CNC manufacturing. No longer will your axle loosen while riding.
- The axle is precision CNC-machined in the USA from 7075 aluminum and hard-anodized for rugged durability. Our axles are built to the tightest standards in the industry.
- No special tools required. Design allows for wheel installation and removal using your standard 6mm hex wrench.
- Designed, built, and quality tested in the USA. Proven around the world.

$114.99 - $119.99
Purchase our Kid Trailer axle for your bike, and share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure.
Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet, and cargo trailers such as Thule, Chariot, Burley, Instep, Carry Freedom, and many more.
- The axle shaft and axle end are precision CNC-machined.
- The axle shaft is 7075 aluminum and hard black-anodized for rugged durability.
- The stainless steel axle end allows for mounting of the hitch provided with your trailer.
- Hardware for attachment of the hitch is included; the hitch, itself, is not.
- No special tools required. Design allows for wheel installation and removal using your standard 5mm hex wrench.
- Designed, built, and quality tested in the USA. Proven around the world.

$106.99
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season.
- When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out.
- The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability.
- No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench.
- Designed, built, and quality tested in the USA. Proven around the world.
Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.

$69.99
Compatible with all Presta pump heads and most sealant injectors, Fillmore is backward-compatible with whatever you got, and forward-thinking in every way. Made for mountain, gravel and 'cross rims up to 28mm deep, Fillmore is one of those upgrades you don't know you need until you try it.
- Airflow - 3 times standard Presta air flow, easing tubeless tire set-up and reducing pumping force
- No clogging - Patented poppet-style design eliminates clogging by shielding air hole from contact with sealant
- Simplicity - Ability to inject sealant without removal of valve core simplifies maintenance
- Adjustable - Micro-air adjustment feature allows for precise trail-side pressure changes

$11.99 - $20.99
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity

$27.99
SILCA valve stem extenders for tubular tires and tubes with removable valve core. ENVE recommends that the length of your tire/tube valve + the length of your extender exceeds the depth of the rim by at least 10mm.
- The 34mm set is optimized for the SES 3.4 and SES 3.4 Disc
- The 45mm set is optimized for the SES 4.5 and SES 5.6 Disc
- The 75mm set is optimized for the SES 7.8 and SES 7.8 Disc

$74.99
Trainer ready.
Keep the ride going by putting your Cannondale on a trainer with the 2-in-1 trainer axle.
Where it thrives:
The open road, on the trainer
What it's built for:
Versatility, convenience
Highlights:
- Fit your Cannondale road bike to any indoor trainer Removable end caps for outdoor riding
- Compatible with Cannondale road bikes that utilize Speed Release dropouts

$74.99
Trainer ready.
Keep the ride going by putting your Cannondale on a trainer with the 2-in-1 trainer axle.
Where it thrives:
The open road, on the trainer
What it's built for:
Versatility, convenience
Highlights:
- Fit your Cannondale road bike to any indoor trainer Removable end caps for outdoor riding
- Compatible with Cannondale road bikes that utilize Syntace X-12 dropouts

$19.99 - $94.99
- Grade 3 balls and magnetite rust proof finish
- Abec 5 precision and silicone w seals
- 3 times cryogenic race treatment
- Bearings sold individually, not as pair

$17.99
A simplified quick release, utilizing an exposed/external split cam that straddles the end of the skewer.
- Lighter and both easier and less expensive to manufacture, these external cam quick release levers represent an excellent value
- Fits both road and mountain bike frames & forks with 100/130/135mm hub spacing
- Construction: Chromoly steel skewer with alloy cam/lever and plastic/steel acorn-nut
- Sold as a front & rear matching pair
- Lengths: 133mm (FR) / 169mm (RR)
- Weight: 58g (FR) / 64g (RR)

$36.99
Zipp 101 XPLR MOTO Rim Strip And Tubeless Tape Kit (includes rim strip and tubeless tape for 1 wheel).

$221.99
This 11-speed freehub is only compatible with model-year 2013 (V8) and 2014 (V9) Zipp wheelsets. Check that your hub has a black end cap before using this freehub. Use the spacer for compatibility with 10-speed Shimano and SRAM drivetrains after installation.
The red freehub is designed for SRAM or Shimano drivetrains and includes a spacer for 10-speed compatibility. The blue freehub is designed for Campagnolo drivetrains. The Campagnolo version requires one 0.25mm axle washer, which is included.
- 10 to 11-speed wheel conversion can only be completed by an authorized Zipp Service Center
- Not intended to convert older 10-speed freehub wheels to 11-speed freehub wheels
- Only intended to swap freehub compatibility (SRAM/Shimano - Campagnolo) with current 11-speed wheels
- Includes cassette spacer
- Material: Aluminum

$106.99
- Wheel bearing kit front/rear
- Bearing dimensions: 17 x 30 x 7mm
- Material: steel
- 2 pieces

$16.99
Package comes with two pieces of rim tape for use with the Zipp clinchers. Woven nylon material. Tape is extra thin with a thickness of 0.5 mm.
Note: For Zipp 700c and 650c aluminum/carbon hybrid clichers, use the 16 mm rim tape. For Zipp 30 wheel set use 18mm but for the wider Firecrest and Firestrike carbon clinchers use the 20mm x 1/2mm rim tape.

$569.99
- Kits include Freehub body with CeramicSpeed bearings pre-installed for easy installation onto the wheel
- Measurable wattage savings between 1.5 and 9 watts per bearing set, depending on the level and condition of your existing bearings
Page 1 of 9
Next page