Parts & Accessories
Fully taped seam sealed water protection, constructed with Zap fabric for ultra-visibility, a modern staple for commuting and low-light training rides. - Polyester construction with microglass beads provides durability and high visibility - Hook-and-loop rear closure offers a wide range of fit depending on shoe profile
Body Geometry Footbeds are ergonomically designed and scientifically tested to increase power, endurance, and comfort by optimizing hip, knee, and foot alignment. With three different arch support options (Red+ being the lowest, Blue++ being in the middle, and Green+++ being tallest), you can be sure that every precious watt is preserved through the pedal stroke. - Body Geometry Footbeds measurably increase power, reduce time to exhaustion, and reduce injury by aligning hip, knee, and foot. - Customized longitudinal arch and metatarsal support with Red+, Blue++, or Green+++ contour. - Proprietary lightweight foam avoids taking a compression set for long-lasting performance. - Combine Body Geometry shoes, footbeds, and wedges to maximize performance benefits.
Reach for this shoe cover on those cold days when you're not taking no for an answer. This is our very warmest shoe cover, thanks to three-layer AmFIB softshell fabric and a quilted lining with 100g Primaloft Gold with Crosscore technology. Plus, a durable water-repellent (DWR) finish keeps your feet dry through most conditions. Our anatomic design eliminates the bunching that can happen near the top of the pedal stroke, and the patented two-stage hook-and-loop closure makes them easy to put on and take off, solving one of the most frustrating parts of using shoe covers. - AmFIB Softshell provides superior wind and water protection - 100g Primaloft Gold w/Crosscore technology insulation is made from 35% post-consumer recycled polyester and incorporates Aerogel particles for incredible warmth with minimal weight - Patented two-stage hook-and-loop closure provides both sleek fit and easy on and off - Anatomic paneling for a performance fit - BioViz reflective elements for low-light visibility - Main Body: 37% polyurethane, 33% polyester, 20% polyamide, 10% CORDURA - Lining: 100% polyamide - Made in Vietnam
Our best-selling shoe cover, this piece slips easily over road shoes to add warmth and wind protection for cool weather riding. Our AmFIB toe cover is the perfect answer to cool weather. Its softshell fabric offers terrific protection from wind and rain and is as easy to pull on as a sock. We have increased the stretch to accommodate wider shoes and sizes on the bubble. The opening is sized for any three-bolt cleat. - AmFIB Softshell provides superior wind and water protection. - Simple pull-on design. - BioViz reflective elements for low-light visibility. - For road shoes with external cleats.
Durable construction combines with insulating wind and water-resistant fabric that protects feet from the coldest conditions. - Softshell fabric provides optimal wind protection and water resistance - Two stage hook and loop closure provides both sleek fit and easy on and off - Anatomic paneling for a performance fit - Kevlar road bottom spreads open for easy on and off while providing superior durability - For road shoes with external cleats - BioViz reflective elements for low-light visibility
Use these easy-to-slip-on covers over your treaded MTB shoes to keep your feet warm and dry in the sloppiest riding conditions. - P.R.O. Barrier WxB fabric provides optimal wind and water protection - Fleece lined interior for warmth - Waterproof, taped external seams - Second generation two stage hook and loop closure provides both sleek fit and easy on and off - Durable Kevlar bottom holds up to trail use - Synthetic leather toe bumper adds scuff protection - Bottom is designed to fit treaded MTB style shoes - BioViz high visibility colors and reflective elements
When the conditions get wet, keep pedaling with warm and dry feet in these easy-to-slip-on, wind- and water-protective covers. - P.R.O. Barrier WxB fabric provides optimal wind and water protection - Fleece lined interior for warmth - Waterproof, taped external seams - Second generation two stage hook and loop closure provides both sleek fit and easy on and off - Durable rubber toe area provides superior traction on wet surfaces - For road shoes with external cleats - BioViz high visibility colors and reflective elements
Let's get real; toe covers are a great way to deal with cold weather. They can be pulled over the toe of most cycling shoes and left on for the whole winter, and people do more miles on 45-degree days than they do on 25-degree days (even in Canada). Our toe cover uses our AmFIB softshell fabric to keep out the wind and rain and we positioned the band to sit behind toe spikes so that they will work with road or mountain shoes. Kevlar on the underside increases durability while the hook-and-loop closure makes the fit adjustable and the mounting quick. - AmFIB Softshell provides superior wind and water protection. - Innovative power-band secures front of shoe cover under toes. - Kevlar bottom with hook-and-loop closure allows easy on and off. - BioViz reflective elements for low-light visibility. - For road or mountain bike shoes.
The Course R2 gaiters are perfect for exploring paths at high intensity. This model covers the ankle to prevent snow from entering your boots. The fabric does not extend to the lower leg so as not to affect the natural movement of your running stride.
$34.99 - $54.99 $54.99 Up to 36% Off
For those cool days when rain forces you to cover your shoes, the H2O 2 knows no equal. This shoe cover offers extreme protection from torrential downpours. The bottom of the shoe is almost entirely covered while the top repels water and also blocks wind. DETAILS: - Neoprene cuff: Better fit that prevents infiltrations - Under sole: 2 openings with textured neoprene and reinforced rubber for enhanced durability - Rear opening: Rear zipper with zipper protector for easy slip on/off - HiViz360: Reflectors at rear, front and sides for optimum visibility
With the new MT3 Gaiters, we've added a flexible piping along the bottom of the gaiter that conforms to the boot to ensure nothing gets in, as well as an additional adjustable strap under the foot for maximum security. Designed to be worn in the most extreme conditions, the MT3 Gaiters cover you no matter how deep you go.
With the new Women's MT3 gaiters, we've added a flexible piping along the bottom of the gaiter that conforms to the boot to ensure nothing gets in, as well as an additional adjustable strap under the foot for maximum security. Designed to be worn in the most extreme conditions, the MT3 Gaiters cover you no matter how deep you go.
Designed to be abused and then re-used, the MT500 Plus Overshoe II uses super tough nylon faced neoprene with durable overlays in high wear areas and a hard-wearing rubber sole that is compatible with wide fit flat pedal and clipless MTB shoes. The front toe section incorporates aggressive, lugged tread to ensure that you don’t lose any of that vital traction needed to push back up the trail. - Super tough, nylon faced neoprene upper with highly durable overlays - Exclusive, hardwearing rubber open sole for flat or clipless pedals - Aggressive rubber toe section for added grip - Rear double Velcro closure with fit adjustment - Wide fit, suitable for varied MTB flat pedal and clipless shoes - Clean shoes, clean lines, muddy trails - Due to the variety of shoe profiles check compatibility with your shoe by trying on before buying
- Stretch waterproof PU fabric with taped center front seam - Extensive 360-degree reflective trim on front, side, and rear - Flatlocked seams for additional durability - Opens fully at sole and up back heel with Velcro fastening for an adjustable fit - Stretch aramid abrasion resistant sole and toe - Suitable for all kinds of footwear and cleats
S2-Snap BOA cartridge assembly kit for personalizing your shoes. Includes: One left cartridge dial assembly, one right cartridge dial assembly, two laces. Compatible with the following models: - S-Works Road - S-Works XC - Women’s S-Works XC - Pro XC - Women’s Cascade - Rime Expert - Comp MTB - Women’s Motodiva
Allows simple, removable, in-shoe adjustment to the forefoot varus/valgus angle for optimum foot, knee, and hip alignment. - Reversible shims work for right or left application - Vented for comfort - Package includes two varus shims (orange) or two valgus shims (yellow), based on selection
If you've never experienced the pain of riding with ice blocks for feet, consider yourself lucky. For the rest of us, however, it's a feeling that we'd be happy to never experience again. But without pieces like our Element Toe Covers, history is doomed to repeat itself this winter. Soft Shell fabrics are synonymous with unrivaled protection and quality and this is for a good reason. It provides amazing levels of wind and water resistance, without sacrificing anything to breathability. This means that your toes are going to stay warm and protected, not wet and clammy. And with abrasion resistance at key points of the construction, you'll be receiving these warming advantages for seasons to come. - Abrasion-resistant bottom and toe panels increase the covers' lifespan. - Fabric Content: Knit 44% Polyester, 38% Nylon, 14% Elastane, 4% PU. - Soft Shell fabric provides resistance to both wind and water, without sacrificing anything to breathability, comfort, or layering ability. - Universal cleat opening means that the covers are compatible with both road and mountain shoes.
Depending on where you live and ride, full shoe covers might be a little too aggressive for the conditions at hand. That isn't to say that it isn't cold, though—you just might be better suited with something like Specialized Element Windstopper Toe Covers, instead. These toe covers feature a Gore Windstopper Soft Shell construction that ensures superior levels of breathable insulation, plus reliable resistance to both wind and water. The result? Warmth and protection right where you need it, without running the risk of overheating. - Gore Windstopper Soft Shell provides resistance to both wind and water, without sacrificing anything to breathability, comfort, or layering ability. - Abrasion-resistant bottom and toe panels increase the covers' lifespan. - Universal cleat opening means that the covers are compatible with both road and mountain shoes. - Reflective elements increase your visibility to motorists in low-light conditions. - Small/Medium: sizes 38 – 43 - Large/X-Large: sizes 44 – 48
- Hyper Green and Black is paired with unique reflective trims to drastically increase your visibility to motorists 24-hours a day. - Anti-abrasion knitted yarn was used to provide long-term durability. - Reflective band across the top increases your visibilty to motorists in low-light conditions. - Made for riding in transitional weather. - Two-hole cutout on the sole makes it compatible with road shoe cleats and walking pads.
Replacement SL and SL2 shoe buckles, sold in pairs. - Sold in pairs - SL buckles for 2012 and prior shoes - SL2 buckles for 2013 and newer shoes - Low-profile - Replaces without tools
$20.00 - $21.00
Your cycling shoes thanklessly accompany you through the toughest intervals in nature's worst conditions. Thank them and keep them ticking along with Specialized's Replacement Heel Lugs. These lugs replace the worn-out tread on your S-Works and Pro model road shoes. - Fits 2012 and earlier S-Works shoes - Fits all Pro Road shoes - Heel lug only - Sold in pairs; includes screws
Your road shoes weren't made for walking, but that's just what you did. We can't blame you, though, especially when installing a Replacement Road shoe Heel Lug is so darn easy. Just install these on your S-Works Road shoes (2012 and earlier), and feel the tread under your feet again. - Replacement tread for S-Works 6 and Sub6 - Heel Lugs Only - Sold in pairs; with screws
Your S-Works MTB shoes thanklessly accompany you through nature's muddiest, toughest conditions, so thank them and keep them ticking with Specialized's Replacement S-Works Mountain Shoe Lug Kit. These lugs replace the worn-out tread on your S-Works Mountain shoes. - Includes heel, ball, and toe pieces - Includes toe spikes - Sold in pairs; includes screws
Replacement Ti/Alloy T-Nuts for the S-Works 6 and S-Works Sub6 road shoes.
Replacement ratchet strap for all shoes with SL buckle closure. - Sold in pairs - 2011 D-Link replacement straps: Used on 2011-12 Pro Road and 2011-12 Pro MTB shoes with no screw attachment. - 2011 D-Link replacement straps. Used on Pro road and MTB shoes for 2011 - 2009 X-Link replacement straps: Used on 2009-10 Pro Road and 2009-10 Pro MTB shoes with Phillips head screw attachment. - 2009 X-Link replacement straps. Used on Pro road and MTB shoes from 2009 and 2010
Improve traction in the worst conditions with aggressive toe studs. Ideal for CX racing or Mountain riding in snow, ice, mud or even just hard pack dirt. - 15mm length is longer than standard - Durable stainless steel is engineered for long-lasting wear - Precision threads are compatible with most off-road cycling shoes. - Original equipment for some S-Works XC. - Packaged as 5pc, so you have a spare.
Giro's Ambient Toe Covers add just the right amount of extra warmth on cool rides. Wind- and water-resistant neoprene covers are lined with AGrid fleece for warmth and protection from the elements. Reinforced toe guards add durability and reflective accents enhance visibility. - Small (36-39) | Medium (40-42) | Large (43-45) | X-Large (46-48)
Giro's Knit Shoe Covers add just a touch of extra warmth, protect your shoes from winter road grime, and light up the night with visibility-enhancing reflective ankle stripes. Cordura knit fabric is tough as nails and will stand up to enthusiastic use. - Small (36-39) | Medium (40-42) | Large (43-45)
The replacement heel pad is for all EC90 SLX, EC90 ACC and EC70 outsoles. These outsoles are found on Empire SLX, Empire ACC, Factor ACC, Factress ACC, Trans E70 and Espada E70 shoes. The kit comes with left and right replacement pads and includes hardware.
Every second, every watt, every advantage counts during a time trial. Giro's Ultralight Aero Shoe Covers are made from thin, light, form-fitting Lycra to improve your aerodynamics for the winning edge. Reflective, locking zippers in the back make for easy on/off.
Page 1 of 2 Next page