Pumps/Inflation

Service your Mammoth 2Stage Mini-pump and Outpost HV Mini-pump with this rebuild kit. Compatible with: - Mammoth 2Stage Mini-pump - Outpost HV Mini-pump

- Replacement rubber caps for HP / HV / alloy / pressure / road drive pumps - Sold as a pair

Bringing Lezyne's Smart Kit along means not letting a flat ruin your ride. It contains six glueless patches, a tire boot and a stainless-steel tube scuffer. All of this is stored in a compact pouch that fits just about anywhere for the ultimate in portability.

There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.

These compact, threaded 16-gram cartridges work with compatible CO2 inflators and easily packs into your seat bag.

Will fit Specialized Sport/Comp/HP floor pumps from 2010 - present.

Want a super-easy way to fix a flat? If you have tubeless tires on your mountain bike, all you need is Genuine Innovations' Tubeless Tire Repair Kit. No interior repair is needed, so you don't have to remove the tire. Just plug the hole with the self-vulcanizing plugs, inflate and ride away. The kit includes an insertion tool and five rope plugs.

A rebuild seal kit for the following Lezyne hand pumps: - Road Drive - Carbon Road Drive

Lightweight plugs for tubeless tire punctures. When paired with Genuine Innovations' Tubeless Tackle Kit (#G20439) or Tubeless Repair Kit (#G2650), you can plug pesky punctures in seconds and cycle confident for many rides to come.

Refills … Get your refills here! - Threaded - 16 gram - 3 pack

Replacement CNC-machined aluminum pump mount for all Road Drive and Carbon Road Drive pumps. Includes Velcro pump strap.

Lezyne's Slip Chuck is the perfect solution for getting to those hard-to-reach valve stems, especially on disc wheels. It's precision-machined from aluminum and is designed to fit Presta valves on deep-dish carbon disc wheels.

90 Degree twist style mini CO2 head used on SWAT products - Twist design allow CO2 cartridge to be threaded into head and then unthreaded to start CO2 flow. - Flow can be controlled or stopped by threading cartridge back into head. - Includes plastic spacer that allows head to be mounted for storage on cartridge without piercing it.

Specialized's Threaded CO2 Cartrdiges can be used with Specialized CPRO2 Trigger and Air Tool COMBO2 pump inflators.

You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - MTB 50 mL: Repairs and inflates low-volume MTB tires in less than a minute. - MTB Magnum 75 mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.

Pssstttt. Tired of hearing that when you disconnect your shock pump? Well, hear it no more thanks to Topeak's Pressure-Rite. It's a must have for suspension fanatics as its ingenious design prevents air loss when adjusting shock and fork pressure. It's also available in a Presta version, perfect for disc wheels.

A lightweight and efficient mini pump with a locking T-handle for improved comfort and efficiency. - 25mm 6063-T6 aluminum sleeved barrel. - Reversible valve fits Schrader and Presta valves - Thumblock lever holds securely onto valve. - Locking T-handle improves ergonomics and provides better leverage when pumping. - 222mm total length - 120 PSI maximum pressure. - 121g

220 PSI replacement analog pressure gauge for all standard floor pumps, includes glue and o-ring. Highly precise with an oversized 2.5 inch face, this new gauge increases visibility and allows the user to read a more precise measurement of low and high pressure tires.

60 PSI replacement analog pressure gauge for all dirt floor drive pumps, includes glue and o-ring. Highly precise 2.5 inch screen. Included on the Alloy Dirt Floor Drive and Classic Dirt Floor Drive.

- Replacement ABS Flex Hose for Lezyne hand pumps - Presta/Schrader ABS Flex Hose for HP, HV, Alloy, Pressure, and Tech Drive hand pumps

Replacement ABS Flip Thread Chuck for all Lezyne High-Pressure Floor Drive floor pumps and all Micro Floor Drive hand pumps.

• Lightweight and compact mini pump • For both schrader and presta valves • Maximum pressure up to 11Bar / 160PSI • Magnet lock system • Glass fiber reinforced Nylon material • Colour: Black

Replacement head for the Air Tool Expert Floor Pump.

Profile Design's CO2 Mounting Bracket is a small, light holder that attaches to any Profile rear-mounted drink system or under any bottle cage. Once in place, the bracket provides a handy place to carry a CO2 refill cartridge for your CO2 inflator (Profile drink system, bottles, CO2 cartridges and inflators sold separately).

Easy to use, easy to control and affordable CO2 inflation. Best bang for your buck in CO2 inflators. Simply thread on your favorite CO2 cartridge, unthread the cartridge off slightly to engage inflation, and tighten it back to slow or stop inflation. - Lightweight composite body. - Anti-corrosion, self-lubricating brass interior ensures long-term safety and durability. - Aluminum universal thread on valve fits Schrader and Presta valves. - Compatible with most major brands of threaded cycling CO2 cartridges. (not included) - 21g

- CNC alloy construction - Simple, proven spring loaded valve design - Presta & Schrader valve compatible - Accepts all threaded CO2 cartridges - 55 grams

220 PSI replacement analog pressure gauge for 2014 and later models of Alloy, CNC, and Classic pumps, includes glue and o-ring. Highly precise with an oversized 3.5 inch face, this new gauge increases visibility and allows the user to read a more precise measurement of low and high pressure tires. Included on our CNC, Alloy, and Classic floor drives.

This durable pump with SwitchHitter head automatically adjusts for Schrader or Presta valves. - SwitchHitter head works on Schrader or Presta valves with no disassembly. - Plunger locks to body chamber with a simple twist for secure storage. - Water bottle boss mount included. - Max pressure: 120psi (8.3bar) - Volume per stroke: 48.4cc

A simple, compact system to carry everything you need to fix a flat without weighing you down. - Patent pending design allows the spare tube to be rolled up while protecting valve stem from rubbing a hole through the rubber - CO2 valve head and 2-sided tire lever snap into place for compact and secure storage - Holds a single threaded 16g CO2 cartridge - Fits up to 80mm long tube valve stems

Lightweight mid-high pressure mini pump with built-in extendable hose and easy-to-read dial pressure gauge. Achieves a higher maximum pressure with less effort. - 20mm Composite barrel. - 30mm dial gauge is accurate to +/- 2 PSI. - TIPFLIP reversible valve with locking lever, fits Schrader and Presta valves. - 160mm extendable hose relieves stress on valve stems. - 265mm total length - 100 PSI Maximum pressure. - 109g