Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Hubs

Stan's NoTubes 3.30/3.30Ti Rear Hub End Caps for XD Driver
$29.99
Replacement end caps for Stan's NoTubes rear hubs with XD Driver.
Shimano XTR M9100 Front Hub
$234.99
Built with labyrinth and contact seals to remain silky smooth in dusty, muddy, wet, and sandy conditions, and with highly refined cup and cone surfaces, the XTR front hub is perfect for custom MTB wheel builds. - Traditional flange
DT Swiss 240 Classic EXP MTB Rear Hub
$719.99
Direct power transmission in every riding situation—240 with Ratchet EXP. With the latest generation of the 240 hubs, the strengths have been further enhanced. The latest Ratchet EXP freehub system increases the bearing lifetime thanks to the increased bearing distance. The new version of the end caps simplifies tool-free disassembly and makes maintenance easier. The hollow-machined ratchets transfer your energy directly into acceleration thanks to the 36 teeth.
DT Swiss 240 Classic MTB Front Hub
$355.99
The number to count on—240 with Ratchet EXP. The new 240 is developed for riders with the most extreme ambitions. The latest version of the hub is equipped with the Ratchet EXP system to maximize reliability. The increased bearing distance increases bearing lifetime, the straight spring provides more direct engagement (which reduces wear), and a smaller number of parts not only makes maintenance easier, but also reduces weight.
DT Swiss 350 MTB Center Lock Rear Hub
$338.99 - $381.99
DT Swiss' 350 MTB hub delivers the amazing performance you've come to expect from DT Swiss at an incredible value. Fast and reliable, DT's legendary Ratchet System ensures precise engagement no matter how hard you stomp on the pedals. Plus, these Center Lock disc hubs make rotor installation and removal super fast.
DT Swiss 350 MTB Rear Hub
$359.99 - $399.99
Reliability meets simplicity—running smoothly day-in and day-out. The 350 hub was developed according to the credo: Reliability meets simplicity. The simultaneous engagement of the ratchets and the resulting large engagement area provide reliability. The plugged construction allows easy maintenance without the need for tools. Adaptation to different axle standards or modification of the engagement angle is also possible with just a few manual steps.
Zipp ZM2 Front Hub
$269.00
Zipp's ZM2 hubset delivers dependable precision performance to the gnarliest trail. - Engineered in Germany with better seal design for improved durability - Compatible with e-mountain bikes - Spoke Count: 32H - Boost only - 6-bolt brake interface
Zipp ZM2 Rear Hub
$499.00
Zipp's ZM2 hubset delivers dependable precision performance to the gnarliest trail. This German-engineered hubset features 12 pawls and 132 points of engagement for a quicker response. The hub's improved seal design means better durability on rough terrain. The genius of the ZM2 hub is how we achieved quicker engagement. This hub system works with 12 pawls, in 4 groups of 3, on a 33-tooth ratchet ring. The 33 teeth make the ring strong with pickup that's reliable and consistent. The 4 groups of 3 pawls are staggered, meaning there are always 3 pawls engaging at any time, which boosts durability. The ZM2 also has higher load transmission capability. The hub is capable of being used on electric mountain bikes. - Engineered in Germany with better seal design for improved durability - 132 points of engagement - Designed with 12 pawls (4 groups of 3) for quick engagement - Strong ratchet ring maximizes load capacity - Compatible with e-mountain bikes - Spoke Count: 32h - Boost only - 6-bolt brake interface
Zipp ZR1 Rear Hub
$499.00
In designing an upgraded hubset for our pro-proven Firecrest wheel lineup, we turned to our engineering colleagues at SRAM's development center in Schweinfurt, Germany. The result is the ZR1 hubsets for disc wheels. This hubset features better seal design for improved durability and quicker response with 66 points of engagement. Our engineers spent more than two years developing the ZR1. Proving the durability of the hubset included more than 58,500km of test riding, part of 3,222 hours of total testing. The ZR1 features key technology from Zipp's Cognition hubs. The seal design is the same as the Cognition, with a large dust cap at the base of the driver body and better bearing seals for more protection. The bearing size also is the same as the Cognition, although the Cognition uses a premium bearing. The six pawls are offset to work in two groups of three pawls. There are always three pawls engaging. This design creates a quick engagement feel, with 66 points of engagement. The driver body is designed so pawls stay in place for disassembly to make service convenient. Zipp hubs are designed to use J-bend spokes, the most popular type of spokes today. J-Bend, widely available, are easier to replace. - Better sealing, increasing durability over previous hub model - Quick engagement for a responsive ride - Lightweight - Same bearing size as premium-level Cognition hub - e-bike certified - Disc brake hub with Center Lock rotor interface. The lock ring is included
WeThePeople Arrow Front Hub
$142.99
An evolution of their world-renowned Supreme hubs, the WeThePeople Arrow hubs are a super lightweight alternative for the pegless riders out there looking for unrivaled performance and quality. The 7075-T6 alloy axle and knurled CNC machined cones help keep this hub incredibly light, and give it a super smooth look unlike any other front hub on the market.
WeThePeople Arrow Rear Hub
$289.99
An evolution of their world-renowned Supreme hubs - the Arrow Rear Hub from WeThePeople is a super lightweight alternative for the pegless riders out there looking for unrivaled performance and quality. Using the same bombproof Q-Lite internals and "IGUS" bushing driver as the Supreme Cassette, the Arrow's 7075-T6 alloy axle, and knurled CNC-machined cones help keep this hub incredibly light and give it a super smooth look unlike any other hub on the market.
WeThePeople Supreme Cassette Rear Hub
$289.99
The features on this latest incarnation of WeThePeople's Supreme Cassette Hub include a peg friendly 12mm female bolt system, twin bearings in the non-drive side, and a new IGUS bushing Switch Drive Q-lite driver. The 12mm female bolt system gives you a stronger peg interface and a bombproof axle. Pair it up with WTP's Supreme hub guards (sold separately) and you have a super-dependable cassette hub ready for battle. - Material: 6061-T6 alloy refined hub-shell - Axle: 17mm 4130 crmo female axle, fully heat-treated - Bolts: super tough 12mm crmo bolt with 14mm extension - Bearings: 3 high quality sealed bearings in hub shell - Switch drive system, RSD/LSD switchable, new one piece pawl & spring system
Stan's NoTubes 3.30/3.30Ti 12mm Rear Thru-Axle Conversion Kit
$54.99
Converts a Stan's 3.30/3.30Ti rear hub to a 12mm thru-axle. Compatible with both Type 1 and Type 2 rear hubs.
Stan's NoTubes 3.30/3.30Ti 9mm Thru Axle Hub Kit
$33.54
The 3.30/3.30Ti 9mm Thru Axle Hub Kit makes Stan's 3.30 front hubs 9mm through axle compatible. Installation is easy—just pull the old ones off and put the new ones on.
Stan's NoTubes 3.30HD 20mm Hub Kit
$31.99
Stan's 3.30HD 20mm Hub Kit makes Stan's 3.30HD front hubs 20mm through-axle compatible. Installation is easy—just pull the old ones off and put the new ones on.
Stan's NoTubes 3.30HD 9mm Thru Axle Hub Kit
$33.54
The 3.30HD 9mm Thru Hub Kit makes Stan's 3.30HD front hubs 9mm through axle compatible. Installation is easy—just pull the old ones off and put the new ones on.
Stan's NoTubes 3.30HD Shimano/SRAM Steel Freehub Body (9/10-speed)
$149.99
Replacement Shimano/SRAM steel freehub body for Stan's NoTubes 3.30HD rear hubs.
Spank HEX Drive Microspline Freehub
$144.99
Alloy Shimano Micro Spline Freehub Body for HEX rear hubs. - Compatibility: HEX J-TYPE/HEX STRAIGHT-PULL Rear Hubs - Includes: Spacer ring, conversion spacer, and 3 bearings - Material: alloy - Weight: 108g
Spank HEX Gravel 6B Disc QR/TA Rear Hub
$274.99
- HEX DRIVE 102T technology delivers 3.5° engagement for almost instant pickup - 6 independent pawls with 3 steps per pawl, work in unison, meaning 18 engagement points per click - Bite-Block Alloy HG and XD Freehub bodies resist damage from cassettes without the weight penalty of steel - Forged and CNC weight-optimized alloy hub body - Unique flange design reduces dish requirement and minimizes tension range between drive-side and non-drive-side spokes - Advanced seal system improves prevention of bearing/drive system contamination - QR end caps included with all hubs - Cassette/Driver: choose; Shimano HG-11, or Scram XDR - Axle/Spacing: 12x142mm Thru Axle (includes 10mm QR endcaps) - Hole: 28h
Spank HEX Gravel Front Hub
$137.99
- Highly weight-optimized front hub, ideal for Gravel and XC. - 28mm-diameter bearings minimize overall weight and allow adaptability up to 15mm thru axles - Unique flange design reduces dish requirement and minimizes tension range between drive-side and non-drive-side spokes - Compatible with 28 HEX front hub adapters only - Advanced seal system improves prevention of bearing contamination
Spank HEX J-Type R150/157 Rear Hub
$284.99
- SPANK's HEX DRIVE 102T technology delivers 3.5° engagement, for almost instant pickup - 6 independent pawls with 3 steps per pawl, work in unison, meaning 18 engagement points per click - Bite-Block Alloy HG and XD Freehub bodies resist damage from cassettes without the weight penalty of steel - Unique flange design reduces dish requirement and minimizes tension range between drive-side and non-drive-side spokes - Advanced seal system improves prevention of bearing/drive system contamination
Spank Oozy/Spike Rear Hub Steel Freehub - eBike
$144.99
- Micro Spline freehub for Oozy/Spike rear hubs - Material: steel
Shimano 105 HB-R7000 Rim Brake Front Hub
$48.99
Internal O-rings, a grease sleeve, and high-quality cup and cone bearings lend this 105-level hub high durability and smooth rolling. - Internal O-rings and grease sleeve - High quality, sealed Cup & Cone Bearing - High durability and smooth rolling for sustained performance
Shimano Alfine Centerlock Dynamo Hub
$169.99
Shimano Alfine Center Lock Dynamo Front Hub - Compatible with 26 to 28-inch wheel sizes - Light alloy QR lever and nut - 6V, 3.0W output - Centerlock rotor mount - Spoke Interface: J-Bend - Weight: 575g
Shimano Deore 6-Bolt Disc Brake Front Hub
$42.99
The Shimano HB-M525A hub is ideal for use with 6-bolt disc brake rotors and quick release dropouts. - Double contact sealing - Super polished bearing races for low friction rolling - 6-bolt ISO disc mounting surface
Shimano Deore HB-T610 Rim Brake Front Hub
$29.99
Made for trekking bikes with rim brakes, the SHIMANO DEORE T610 front hub offers durable and reliable performance thanks to its high-quality sealing and angular contact bearings. - Double contact sealing - Super polished bearing races for low-friction rolling
Shimano Deore XT M756 6-Bolt Disc Front Hub
$58.99
Shimano XT M756 front hub. - Double contact sealing - Super polished bearing races for low friction rolling - Light alloy QR lever and nut - 6-bolt ISO disc mounting surface
Shimano Deore XT M756A 10-Speed 6-Bolt Disc Rear Hub
$69.99
Shimano XT FH-M756 Series Rear Hub - Double contact bearing seals - Super polished bearing races for low friction rolling - Light alloy QR lever and nut - 6-Bolt rotor mount - Bearing Type: Loose Ball - Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed - Center to Flange, Left: 33.5 - Center to Flange, Right: 20.5 - Flange Diameter Left: 61 - Flange Diameter Right: 61 - Hub Drilling: 32 - Hub/Brake Compatibility: 6-Bolt Disc - Rear Axle: QR x 135mm - Skewer Included: Yes - Spoke Interface: J-Bend - Weight: 495 grams
Shimano Deore XT M8100 Front Hub
$76.99
With simple setup and reliable trail performance, the Shimano Deore XT 8100 front hub is perfect for custom MTB wheel builds. - Easy disc brake rotor installation with Center Lock spline mount and lock ring - Tool-less 15mm thru axle system optimizes rigidity and weight - Simple setup and reliable trail performance
Shimano Deore XT M8100 Straight Pull Front Hub
$99.99
With simple setup and reliable trail performance, the Shimano Deore XT front hub is perfect for custom MTB wheel builds. - Easy disc brake rotor installation with spline mount and lock ring - Toolless 15mm thru axle system optimizes rigidity and weight - Simple setup and reliable trail performance - Hole Count: 28
Page 1 of 3 Next page