Parts & Accessories

- Steel Presta valve adapter, allows the use of a Schrader air nozzle to inflate a Presta valve - Includes a chain attachment, to fasten the adapter on a floor pump

Easy to use and compatible with Presta and Schrader valves, the Twin graph is an intuitive gauge which allows an efficient measure of your tyre's pressure. TECHNICAL SPECS Reference: 6550 Connection: Presta / SchraderDimensions: 100 x 45 mm Weight: 37 g Pressure: Pression Precision: 0,15 bar / 2 psi Graduation: Bar und psi/bar

Stan’s unveiled the Dual Action Repair for Tubeless (DART) Tool in 2019, ushering in the first repair plug designed specifically for tubeless bicycle tires, rather than a scaled-down version of what was available in the automotive and motorcycle world. Subsequent refinements made way for the tool’s rerelease as the Original DART Tool in 2025, introducing a stainless steel insertion rod accompanied by an improved DART developed through the first tool’s lifespan. By using a flexible, laser-cut material, the DART conforms to nonuniform puncture shapes caused by the jagged and sharp edges of debris and obstacles found on trails, roads, and paths. Treated with a reactive solution, the DART bonds with liquid sealant on the inside of a tubeless tire to form both a chemical and mechanical seal to permanently bond a puncture too large for tubeless sealant to repair on its own. Complete with two DARTs, the tool weighs only 15-grams and fits comfortably in any small pack pocket. For added convenience, the base of the molded plastic tool body features a Presta valve core remover to aid in-the-field sealant topoffs with either a 60ml or 120ml bottle of Stan’s Original Tubeless Sealant. - Includes two DARTs, refills sold separately - Repairs punctures and slices too large for sealant alone to seal - Woven, laser-cut material easily conforms to nonuniform puncture shapes - Base of tool features molded Presta core tool for sealant top-offs - Clear caps keep DARTs clean and unthread for quick use

Stan’s NoTubes Sealant is a thin, low-viscosity liquid that coats the tire interior and seals punctures quickly. Two ounces of Stan's in a tubeless tire can repair punctures up to 1/4" to keep you rolling. Stan's Tire Sealant is formulated to stay liquid in tires for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart can convert up to 16 tires. - Suitable for use in tubeless tires and standard tubes - Designed to seal punctures up to 1/4" - Stable down to -30 degrees Fahrenheit - Non-hazardous, non-corrosive, non-toxic - Contains natural latex

A new and improved Tubeless Sealant Injector syringe supports the needs of modern tire sizes and the higher volume fill of sealant required, for a flat-free riding experience. The larger volume 150ml injector makes application of sealant simple, with no mess or waste of sealant. - Larger 150ml volume gives you the ability to inject sealant into today’s higher-volume mountain, gravel, and road tires with a single fill - New easy press-on adapter presses directly onto Presta and Schrader valve stems for quick fills without threading or additional parts - Patent pending top-fill, drip-free system features a cross-slit valve in the fitting paired with a unique air-relief channel in the injector body allows a precise fill of well-shaken sealant from the top for a convenient set-up with zero mess - Hose plug included for hanging on your workbench or mess-free storage in your toolbox

For high pressure (Presta) valve with removable valve core. - Tubeless compatible - Valve core removal key included - Aluminum - 2 per set - 12g

50 hard wearing carbide tip studs clad in a galvanized steel base. Comes with tool for easy insertion. In order to ensure that spikes are permanently fixed, tires should be run in for about 40km on asphalt, while avoiding any fast acceleration or heavy braking.

With design, sustainability & quality running right to the core, there’s only one company we could work with on our valve colours - Chris King! With our valves for life guarantee and their stunning colourways, your bike is in for a real treat for years to come. Made from premium lightweight, high strength 7075 aluminium, Peaty’s MK2 Tubeless Valves fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims. Our unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, our valves have a ‘straight-through’ design so there’s no reduction of sealant or air flow when tyre inserts are not used. Fitting couldn’t be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails. Crushed a rubber or snapped an o-ring? No problem, check out our service kits to spruce up your valves when swapping to your next set of wheels or new bike. Instructions (1) Remove valve cap, o-ring and lock nut (2) Insert valve through valve hole in rim (3) Push the o-ring onto valve stem (4) Thread the lock nut onto valve stem (5) hand tighten lock nut until firm (6) Screw on valve cap

With design, sustainability & quality running right to the core, there’s only one company we could work with on our valve colours - Chris King! With our valves for life guarantee and their stunning colourways, your bike is in for a real treat for years to come. Made from premium lightweight, high strength 7075 aluminium, Peaty’s MK2 Tubeless Valves fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims. Our unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, our valves have a ‘straight-through’ design so there’s no reduction of sealant or air flow when tyre inserts are not used. Fitting couldn’t be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails. Crushed a rubber or snapped an o-ring? No problem, check out our service kits to spruce up your valves when swapping to your next set of wheels or new bike. Instructions (1) Remove valve cap, o-ring and lock nut (2) Insert valve through valve hole in rim (3) Push the o-ring onto valve stem (4) Thread the lock nut onto valve stem (5) hand tighten lock nut until firm (6) Screw on valve cap

Endurance formula lasts twice as long as standard Orange Seal. - Premium Latex coats the whole casing, from tire bead to tread cap - Seals punctures up to 1/8-inch, and slices up to 1/2-inch with the use of Nanites - Developed to add as little weight to a tire as possible - Made of eco-friendly biodegradable ingredients

Subzero tire sealant. It's formulated to maximize extreme frigid temperature; enabling riders in the far North to ride with flat protection. All while offering the same quick-sealing properties you’ve come to expect. - Premium Latex coats the whole casing, from tire bead to tread cap - Seals punctures up to 1/4" with the use of Nanites - Developed to add as little weight to a tire as possible - Made of eco-friendly biodegradable ingredients - Subzero sealant is developed for use in below-freezing conditions down to -20F

Your tubeless wheels will benefit from the use of Orange Seal Tubeless Tire Sealant. It is proven to seal large punctures up to 1/4-inch and perform under varying temperatures and altitudes. Orange Seal Tubeless Tire Sealant is compatible with most bike tire systems and is eco-friendly.

Ultra-compact polypropylene case. Kit includes machined aluminum T-handle with combined reamer and insertion tool and five tire plugs. - Weight: 48g

Compact tubeless tire repair kit with machined aluminum storage tube that doubles as a handle. Combined tire reamer and insertion tool. Includes five tire plugs. - Weight: 47g

CushCore is an engineered foam insert to be mounted inside a tire, designed to absorb impacts, reduce vibration, and increase lateral stability. These characteristics translate to a more controlled, comfortable, and faster ride. - The system is designed to be used with tubeless-ready or tubeless converted rims and tires and is compatible with tubeless tire sealants - A specially designed tubeless air valve is included with each insert, allowing air to move through the valve without becoming obstructed by the insert - The insert divides the inner volume of the tire in half, maintaining air underneath the tread and the foam insert next to the rim - Fits tire widths 33 – 46mm and inner rim widths 19 – 26mm Includes - 2 CushCore Inserts - 2 CushCore Tubeless Air Valves - 4 Rim Stickers - Installation Instructions

CushCore is an engineered foam insert to be mounted inside a tire, designed to absorb impacts, reduce vibration, and increase lateral stability. These characteristics translate to a more controlled, comfortable, and faster ride. - The system is designed to be used with tubeless-ready or tubeless converted rims and tires and is compatible with tubeless tire sealants - A specially designed tubeless air valve is included with each insert; allowing air to move through the valve without becoming obstructed by the insert - The insert divides the inner volume of the tire in half, maintaining air underneath the tread and the foam insert next to the rim - Fits tire widths 2.1 – 2.6" and rims with internal width 22 – 35mm Includes: - 2 CushCore Inserts - 2 CushCore Tubeless Air Valves - 4 Rim Stickers - Installation Instructions

Those guys who said "Tubeless tires never get punctures"? They lied. The Blackburn Plugger Tubeless Tire Repar Kit is a quick, one-shot tire plugging system for tubeless tires. It deploys in seconds to give a permanent fix for your flat. Mount it to your frame, tape it to your top tube, or strap it to your ankle like a shark knife. Just keep it close and it'll get you out of trouble. Pronto. - Stores ten plugs. - 27g tool only 47g tool with strap

A comprehensive patch kit for all puncture sizes. - Contains 7 assorted patches, 1 metal buffer and 1 tube of rubber cement

45NRTH utilizes a two-piece construction method to create a reliable and high-performing bicycle tire stud with a concave carbide-aluminum design. The open space and edges created by the large concave crown result in twice the surface area for increased traction and grip. - Concave tip for traction, durability, and longevity - Aluminum base to save weight - Compatible with 45NRTH stud insertion tool - Compatible with all studdable 45NRTH tires - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.

The 45NRTH stud insertion tool seats and removes the stud from the stud pocket. Customize your stud tread pattern or replace missing studs. Works with all 45NRTH studdable and studded products. - Tire studs sold separately - POM-injected handle - Stainless steel barrel - Thumb and index finger grips for more comfort and control - Compatible with studs that have a 3.5mm or smaller shaft

Tubeless Universal Valve—ZIPP 3ZERO MOTO Removable Valve Core - Includes 1 tubeless—valve & 1 valve core wrench - Compatible With: WH-MOTO-30-A1

Tubeless Universal Valve—SRAM MTB - Removable Valve Core - Includes 1 tubeless valve & 1 valve core wrench Compatible With: WH-RISE-60-B1, WH-ROAM-30-A1, WH-ROAM-40-A1, WH-ROAM-50-A1, WH-ROAM-50-B1, WH-ROAM-60-A1, WH-ROAM-60-B1

Tubeless Valve/Tape Kit - Includes Tape, 2 Universal Valves & 1 Valve Core Wrench

- Reduces the risk of flats caused by nails, rocks, etc. - Sold by pair

- Reduces the risk of flats caused by nails, rocks, etc. - Sold by pair

- Reduces the risk of flats caused by nails, rocks, etc. - Sold by pair

- Shim adds support to Presta stem used in a Schrader rim

- Repairs punctures up to 1/4 (6mm) - Optimized for temps down to 15degF (-9.4degC) - Synthetic later minimizes the risk of allergic reactions

Vittoria's Mastik'One is a professional-grade tubular cement that has been trusted by the pros for decades. It provides excellent hold on both aluminum and carbon rims, and gives you the piece of mind that comes with knowing you're riding on the best. - Choose from 250-gram tin or 30-gram 12-pack - 30 grams is enough for one to two tires depending on surface area

You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.