Filter By:
Cables

$39.99
Shimano OT-SP41 Housing & Stainless Cable Derailleur Sets
3000mm x 4mm housing x 1
2100mm x 1.2mm stainless steel cable x 1
1800mm x 1.2mm stainless steel cable x 1
9 sealed end caps, 1 rubber shield, 1 nose cap & 2 crimps
Factory greased SP41 housing

$44.99
- 1.2 mm x 2100 mm (1 pc.)
- 1.2 mm x 1800 mm (1 pc.)
- OPTISLICK
- Stainless steel
- Outer cap with short tongue for ST (2 pcs.)
- SIS-SP40 outer caps (3 pcs.)
- SIS-SP40 sealed outer caps (1 pc.)
- Inner end caps (2 pcs.)
- OT-SP41 1700 mm
- OT-RS900 (1 pc.)

$69.99
Shimano Dura-Ace Polymer Coated Road Shifter Cables & Housing Set
The Dura Ace Polymer-coated stainless cable set introduced with the DuraAce 9000 series; achieves lighter and quicker shifting, lighter braking with the reduced sliding resistance
OT-SP41 Shift cable set
Polymer-coated inner cable reduces the sliding resistance to achieve lighter and quicker operation
Sealed end caps to minimize dirt contamination
Housing is pre-lubricated with silicone grease
Stainless steel for anti-rust protection
Derailleur kit includes: (1) 1700mm 4mm colored SP41 casing, (2) 2100mm 1.2mm cables, (6) sealed casing caps and (2) cable tips
Low friction polymer material on the cable may cause slippage at the cable fixing bolt after initial pre-stretch for the cable is performed. Fur like material from polymer coating will not affect the performance
Cable Diameter: 1.2 mm
Housing Diameter: 4.0 mm
End Type: Shimano/Sram
Developed for Dura-Ace / Ultegra Components, But Also Compatible with all other Shimano cable-actuated road Shifting systems.

$44.99
Genuine Shimano shift cables & housing sets.
All sets feature two 1.2mm Shimano/SRAM compatible inner cables, pre-lubricated SP-41 housing, ferrules and cable ends;
Sets also include the long nose ferrules used in the latest generation of shifters;
Optislick: smoother cables with less friction, for higher performance applications;

$21.99
Shimano Standard Road Brake Cable & Housing Set
2200mm x 5mm housing x 1
2050mm x 1.6mm double ended cable x 1
1000mm x 1.6mm double ended cable x 1
Housing end cap x 4
Cable end crimp x 2

$68.99
SRAM's Guide Hydraulic Line Kit is a replacement hose kit for all Guide brakes.
- Compatible with SRAM Guide R, RS, RSC, and DB5 brakes
- Length: 2000mm

$70.99
Replacement line kit for SRAM and Avid hydraulic disc brakes.
- For Level Ultimate/Level TLM (A1), 2018+ CODE R/RSC (B1)
- 2000mm, black

$65.99
Original equipment hydraulic hoses for no-compromise brake performance.
- Hose Use: Front, Rear
- Black
- 2000mm hose length
- Compatible with SRAM road hydraulic disc brakes

$14.99 - $16.99
Jagwire's Cable Grips are adapters that make it possible to run hydraulic brake lines on bicycle frames that have housing stops that were designed for regular wire cables and standard housing sections. Once the regular cables and housing sections are removed, the Cable Grips are inserted and tightened in place in the standard frame stops. Then, the hydraulic lines are attached and securely held in place by the gripping jaw(s) of the Cable Grips.
- Aluminum model accepts lines up to 5mm in diameter and the lines snap in.
- Stainless model grips fully around the lines and is adjustable to fit most diameters.

$19.99
Inline adjusters make on-the-fly derailleur cable tension adjustments safe and easy.
- 5mm
- Stronger detent mechanism for use with brake housing
- Perfect for mechanical disc brakes

$44.99 - $47.99
Road Pro Brake kits offer enhanced performance and style. Designed to work with and match Jagwire's Pro Shift kits, the Pro polished brake cables combined with their Slick-Lube liners dramatically reduce friction while Kevlar reinforced, compressionless brake housing delivers smooth, powerful braking performance. And with all needed parts included, Jagwire's Road Pro Brake kits are easy to install.
- Pro level polished cables combined with Slick-Lube, Kevlar reinforced housing enhance braking performance
- All parts needed for a complete brake cable and housing install on road bikes are included
- Kits provide longer housing and cables for large frame with full housing or mechanical disc brakes

$14.99 - $19.99
Jagwire's Sport Inline Adjusters are installed on your shift cable housing sections so that you can fine-tune the shift cable tension by hand (without tools). They're great for keeping your shifting dialed in. They're precision made of lightweight aluminum and nylon for easy use and durability. To install them, remove the cables and housing sections, cut the top housing sections in two and rejoin the sections with the Inline Adjusters in the middle.

$4.89 - $11.99
Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables.
- Slick cables are die-extruded for smooth operation
- Pre-stretched
- SRAM/Shimano mountain compatible cable end
- Stainless steel construction resists corrosion
- Single end cable features weld-cut for easy installation

$16.99
Jagwire's Stick-On Cable Guides are made of lightweight aluminum with adhesive on the bottom. The aluminum lets them conform to any shaped frame tube and the adhesive holds fast. They come with Jagwire's C-Clips, nylon cable clips that snap onto the guides to hold the cables neatly in place. You get a pack of 4.

$61.99
Precision-machined 4mm ID silver aluminum cable ferrules for improved shifting performance. A flat bottom on the inside prevents housing from pulling through ferrules. For use with most shifting cables.
- Inside diameter: 4mm
- Outside diameter: 5.75mm
- Overall length: 12.7mm
- Material: aluminum
- Bottle of 50pcs

$36.99
Precision-machined 4mm ID brass cable ferrules for improved shifting performance. A flat bottom on the inside prevents housing from pulling through ferrules. For use with most shifting cables.
- Inside diameter: 4mm
- Outside diameter: 5. 75mm
- Overall length: 12. 7mm
- Material: brass
- Bottle of 50pcs

$61.99
Precision-machined 5mm ID silver aluminum cable ferrules for improved braking performance. A flat bottom on the inside prevents housing from pulling through ferrules. For use with most brake cables.
- Inside diameter: 5mm
- Outside diameter: 5.75mm
- Overall length: 12.7mm
- Material: aluminum
- Bottle of 50pcs

$36.99
Precision-machined 5mm ID brass cable ferrules for improved braking performance. A flat bottom on the inside prevents housing from pulling through ferrules. For use with most brake cables.
- Inside diameter: 5mm
- Outside diameter: 5.75mm
- Overall length: 12.7mm
- Material: brass
- Bottle of 50pcs

$50.99
- Aluminum cable crimps to prevent frayed cables
- 1.2mm for shift cables or 1.6mm for brake cables
- Silver aluminum
- 250-count bottle

$14.99
Spiral cable wrap manages those messy cables to achieve a sleek clean look while protecting shifting, braking, and electronic bike cables and hoses.

$219.99
- Brake housing for polymer coated brake cables
- Refer to Documents and links to find the right product

$148.00
- Brake casing has internal lining and external plastic coating
- Derailleur casing is compressionless with internal lining and external plastic coating

$49.00
- Aluminum cable-end crimps for derailleur or brake applications to prevent fraying after the final cut
Page 1 of 4
Next page