Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Parts & Accessories

Stages Cycling Gen 3 Stages Power L Carbon MTB GXP Power Meter
$739.99
The new Gen 3 single-sided Stages Power L meter is built on to a non-drive-side Stages Carbon crank arm and it compatible with SRAM GXP MTB drivetrains (168mm Q-factor). Stages Power MTB. Power isn't just for roadies. Stages Power meters are ridden by world and national champions in every discipline of cycling. From weekend warriors to BMC Factory Racing, Trek Factory Racing XC and Olympian Chloe Woodruff, Stages Power for MTB is ridden by the best athletes in the world. Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the data produced by our system. Additional features: - ± 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Specifications - Power meter housing: low profile design, with robust door interface - Weight: Only adds 15g to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter - Power range (Watts): 0 to 5000 - Cadence range (rpm): 10-220 - Water resistance rating: IPX7 In the box - Power Meter - High quality CR2032 coin cell battery - Lifetime access to Stages Link for power meter management and firmware upgrades. - 2 months free access to Stages Link premium training and coaching features. - Product Identification Card with Serial Number and ANT+ I.D. Number. - User Guide
Stages Cycling Gen 3 Stages Power L Carbon Power Meter for FSA & SRAM BB30
$739.99
The new Gen 3 single-sided Stages Power L meter is built on to a non-drive-side Stages Carbon and built to retrofit SRAM (road and mountain), Race Face, and Easton cranks with Stages Power, with added spindle purchase. No additional spindle purchase required for FSA 386EVO cranks. This one Stages Power meter is built to rule them all—all of the most popular 30mm spindled crank sets, that is. Interchangeable 30mm spindles bring Stages Power carbon to numerous popular crank sets. In order to fit a vast array BB30 based crank sets—including, SRAM, RaceFace, and Easton, as well as FSA’s 386EVO —Stages' engineers have developed a range of bottom bracket spindles that serve to mate our super-light carbon Stages Power meter to more than 10 different 30mm spindled crank sets. Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the data produced by our system. Additional features: - ± 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Specifications - Power meter housing: low profile design, with robust door interface - Weight: Only adds 15g to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter - Power range (Watts): 0 to 5000 - Cadence range (rpm): 10-220 - Water resistance rating: IPX7 In the box - Power Meter - High quality CR2032 coin cell battery - Lifetime access to Stages Link for power meter management and firmware upgrades. - 2 months free access to Stages Link premium training and coaching features. - Product Identification Card with Serial Number and ANT+ I.D. Number. - User Guide
Shimano Crank Bolts
$24.99
- Octalink bolts include steel washers, JIS includes black plastic caps - HT2 mount bolts (low torque plastic, except XTR-M970 aluminum) are for mounting non-drive arm - Hollow bolts (SH-21504) not recommended for non-treated spindles
SRAM Carbon Crank Arm Boot
$15.99
SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly intact. - For Descendant Carbon and non-Eagle XX1 and X01
SRAM Rival AXS DUB Power Meter Upgrade
$355.99
Power every ride. We've taken the reliability, elegance, and features of Quarq's legendary crank-based power meter and dropped the barrier to entry once again. This new power meter platform is entirely contained within the DUB spindle for clean integration that fits more bikes than ever. It's invisible technology that adds minimal weight and will help you get to the finish line faster, and it can be used to upgrade any eTap AXS bike. - An elegant, integrated design - DUB-PWR spindle-based unit measures left-side power to calculate total watts - Proven Quarq reliability and accuracy - Long battery life (400+ hours) to power a season of rides - User-replaceable lithium AAA battery - DUB bottom bracket adds durability and simplicity - Waterproof (IPX7 waterproof to 1 meter for 30 minutes) - Lightweight (less than 40g heavier than standard crankset) - Simple and affordable power meter upgrade option - Right Arm/BB/Spider/Chainrings NOT INCLUDED
RaceFace CINCH Spindle Kit 30mm
$99.99
Spindle and hardware kit for Race Face CINCH MTB and fatbike cranks.
RaceFace Six C/Atlas CINCH Spindle Kit—30mm For 83mm
$119.99
RaceFace CINCH Spindle - Fits 150/157mm Hub Spacing
FSA BB30 Crank Bolts
$12.99
- Self-extracting bolts for BB30 cranks: includes puller cap that threads into BB30 crank arms - Sold as singles
Easton Spider & Ring Assembly
$194.99
Easton spider and ring assemblies for CINCH cranks.
Cane Creek 2X Titanium Chainring Spider
$69.99
These spiders are optimized to fit Cane Creek's eeWings All-Road cranks, adding more versatility for riders. The spiders will allow direct-mount cranks, such as the eeWings, to accommodate 110 BCD chainring so riders can expand their gearing options. - Allows riders to run 2x drivetrain configurations with a smaller 32T chainring - CNC high grade 7075 series aluminum - Anodized titanium-gray finish
Wolf Tooth Crankskins
$15.99
- Some do it to protect that beautiful finish on their cranks, and some do it because they can't stand stock crankarm graphics. - Whatever your reason for wrapping and protecting a crankset, we wanted to give you an option with our branding. - These are full-wrap Crankskins that work with most cranksets One pair
Wheels Manufacturing 29mm ID x 2.5mm Crank Spindle Spacer, Bag of 5
$20.99
Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranks. - 29mm I.D. - 2.5mm thick - 5 spacers per bag - Machined engineering-grade Delrin
Wheels Manufacturing 29mm ID x 5mm Crank Spindle Spacer, Bag of 5
$28.99
Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranks. - 29mm I.D. - 5mm thick - 5 spacers per bag - Machined engineering-grade Delrin
Wheels Manufacturing 386 EVO Adapter for 22/24mm Spindle Cranks
$92.99
The Wheels Manufacturing 386 EVO Adapter for 22/24mm Spindle Cranks adapts SRAM/Truvativ cranks to 386EVO-standard frames. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline or to take up any side-to-side movement in the crank. - Machined engineering-grade Delrin - 48g/pr Includes - (1) - 24mm ID adapter (for right-side) - (1) - 22mm ID adapter (for left-side) - (8) - 0.7mm spacers
Wheels Manufacturing 386 EVO Adapter for 24mm Spindle Cranks
$92.99
The Wheels Manufacturing 386 EVO Adaptor for Shimano Hollowtech II Cranks adapts Shimano cranks to 386EVO-standard frames. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline, or to take up any side-to-side movement in the crank. - Machined engineering-grade Delrin - 48g/pr Includes - (2) - 24mm ID adapters - (8 )- .7mm spacers
Wheels Manufacturing BB/PF30 Universal Adapter for 22/24mm Spindle Cranks (SRAM/TruVativ)
$88.99
Machined engineering-grade Delrin inserts for adapting bottom brackets to a different type of crankset spindle. - Adapts PF30 and Cannondale BB30-73A bottom brackets for use with SRAM/TruVativ cranksets - Delrin adaptors fit between bearings and crank spindle - BB Shell Width (mm): 68 mm , 73 mm - Spindle Interface Type: TruVativ GXP - BB/Frame Interface: PF30
Wheels Manufacturing BB/PF30 Universal Adapter for 24mm Spindle Cranks (Shimano, FSA, etc.)
$79.99
Machined engineering-grade Delrin inserts for adapting bottom brackets to a different type of crankset spindle. - Adapts PF30 and Cannondale BB30-73A bottom brackets for use with Hollowtech II cranksets - Delrin adaptors fit between bearings and crank spindle - BB Shell Width (mm): 68 mm , 73 mm - Spindle Interface Type: Hollowtech II - BB/Frame Interface: PF30
Wheels Manufacturing BB30 Adapter for 22/24mm Spindle Cranks
$92.99
Wheels Manufacturing BB30 Bottom Bracket Adaptor for GXP Cranks adapts 22/24mm Spindle Cranks (SRAM/TruVativ) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.
Wheels Manufacturing BB30 Adapter for 24mm Spindle Cranks
$90.99
Wheels Manufacturing BB30 Bottom Bracket Adaptor for Hollowtech II Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.
Wheels Manufacturing BB30/PF30 Multi-Adapter Kit
$333.99
- 8 bikes worth of adapters for Shimano 24mm and SRAM/Truvativ 24/22mm cranks to virtually any BB30 or Pressfit 30 frame, including mountain bikes, 2x10 systems, narrow-shell road bikes, road triples, etc. - 65 piece kit includes 4 each Shimano and SRAM adapter sets, plus extra spacers for chainline adjustment and a puller for removing adapters - Includes: (8) Shimano adapter (24mm ID, Shimano right or left; SRAM right only), (4) SRAM-left adapter (22mm ID, Shimano right or left; SRAM right only), (4) SRAM-right adapter (24mm ID, Shimano right or left; SRAM right only), (12) 0.7mm spacer - right (24mm ID, Shimano right or left; SRAM right only), (4) 1.8mm spacer - right (24mm ID, Shimano right or left; SRAM right only), (4) 2.5mm spacer - right (24mm ID, Shimano right or left; SRAM right only), (8) 1.0mm spacer - left (30mm ID, SRAM), (4) 2.5mm spacer - left (30mm ID, SRAM), (4) 5mm spacer - left (30mm ID, SRAM), (4) 10mm spacer - left (30mm ID, SRAM), (8) wave washer, (1) removal tool for pulling adapter out of BB
Wheels Manufacturing BBright Adapter for 22/24mm Spindle Cranks
$79.99
The Wheels Manufacturing BBright Press Fit Bottom Bracket Adaptor for GXP Cranks adapts 24/22mm cranks (SRAM, Truvativ, etc.) to most BBRight frames. Compatible with 2011-2012 Cervelo models R3, R3 Team, S5, S5 Team, S5 VWD, R5ca and R5 VWD. - Includes eight 0.7mm shims for fine-tuning chain line - Machined engineering-grade Delrin - 8g/pr
Wheels Manufacturing FSA PF30 Adapter for 24mm Spindle Cranks
$92.99
Wheels Manufacturing FSA PF30 Adapter for 24mm Spindle Cranks adapts 24mm Spindle Cranks (Shimano, FSA, etc.) to work on Pressfit 30 frames with FSA's PF30 bottom bracket installed. Simply tap the adapters into the 6806 bearing in the BB shell, install the spindle and cranks. Use our Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. - Machined engineering-grade Delrin - 48g/pr *NOTE: The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter
Wheels Manufacturing Freewheel/BB Spacer
$31.99
Machined aluminum spacers for freehubs. Great for fine tuning freewheel and cassette placement or improving chainline. Also good for bottom bracket spacing with BSA BB cups. - Inner Diameter: 35.0mm - Outer Diameter: 40.7mm - Material: Aluminum - Finish: Polished - Bags of 10
Wheels Manufacturing PF30 Adapter for 22/24mm Spindle Cranks
$92.99
Wheels Manufacturing Press Fit 30 Bottom Bracket Adapter for 22/24mm Spindle Cranks adapts 22/24mm Spindle Cranks (SRAM/TruVativ) to work on PF30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin. Notes: - PF30-SRAM was originally designed for use with SRAM PF30 bottom brackets and will not work with Wheels Manufacturing PF30-BB, PF30-BB-AC or PF30-BB-CER. Use Wheels Mfg BBUNIV-SRAM to adapt 22/24mm Spindle Cranks (SRAM/TruVativ) in Wheels Manufacturing PF30 bottom brackets. - Not compatible with SRAM PF30 bottom brackets that use a thin plastic reducer inserted into the bearings. - The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter
Wheels Manufacturing PF30 Adapter for 24mm Spindle Cranks
$84.99
The Wheels Manufacturing PressFit 30 Bottom Bracket Adaptor for Shimano Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on PF30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin. Notes: - PF30-SHIM was originally designed for use with SRAM PF30 bottom brackets and will not work with Wheels Manufacturing PF30-BB, PF30-BB-AC or PF30-BB-CER. Use Wheels Mfg BBUNIV-SHIM to adapt 24mm Spindle Cranks (Shimano, FSA, etc.) in Wheels Manufacturing PF30 bottom brackets. - Not compatible with SRAM PF30 bottom brackets that use a thin plastic reducer inserted into the bearings. - The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter
TruVativ BMX To Threaded (BSA) BB Adapter
$30.99
- Adapts American/Pro BMX frames with a non-Threaded 51.3mm (2.02") i.d. bottom bracket shell to accept English-threaded bottom bracket & crank applications - CNC-machined aluminum with three steel connecting bolts to prevent independent rotation
TruVativ Blaze ISIS Arm
$41.00
- Crank Arm Length: 175mm - Interface: ISIS - Position: Left
TruVativ Blaze PowerSpline
$34.00
Crank left arm, Blaze Powerspline, 175mm, pitch black
TruVativ Blaze Powerspline Arm
$34.00
- Crank Arm Length: 170mm - Interface: Power Spline - Position: Left
TruVativ M15/M22 GXP Crank Arm Self-Extracting Bolts
$17.00
TruVativ Crank Arm Fixing Bolts - Monocoque carbon crankset with hollow-arm design - FSA Mega Tooth chainring design greatly improves chain retention - FSA BB392 compatibility allows use in nearly any frame - Bottom bracket not included
Page 1 of 2 Next page