Skip to main content

Filter By:

Cables

Jagwire Double-Ended Housing Connector
$1.99
Extend housing runs using these double-ended junction end caps.
Jagwire Basics Road/MTB Brake Cable
$3.99
Basics brake cables provide value on a budget. - Pre-stretched - Double ended for compatibility with SRAM/Shimano road and mountain brakes - Color: Silver - Diameter: 1.6mm
Jagwire Sport Slick Stainless Mountain Brake Cable
$4.89 - $11.99
Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - Slick cables are die-extruded for smooth operation - Pre-stretched - SRAM/Shimano mountain compatible cable end - Stainless steel construction resists corrosion - Single end cable features weld-cut for easy installation
Jagwire V-Brake Boot
$6.99
Jagwire's V-Brake Boot covers and seals the points where the the cable on your V-Brakes, linear-pull and direct-pull brakes enter the noodle. It's made of flexible rubber to seal the cable and help keep dirt, grit and moisture from entering. It keeps your cables and brakes working nice and smooth and ensures your cables last as long as possible. You get a bag of 10.
SRAM Stainless Road Brake Cable
$7.99 - $14.00
Stainless steel cables are extruded to provide a smooth, low-friction surface.
SRAM Stainless Mountain Brake Cable
$8.99
Stainless steel cables are extruded to provide a smooth low-friction surface. - Length: 2000mm
SRAM Stainless Shift Cable
$9.00
- Left and right shifter compatible - Road and MTB compatible - 1.1mm polished stainless steel cable
Jagwire Wire Hook Shift & E-bike Controller
$9.99
- Wire hooks securely hold housing segments together and prevent undue noise and migration - Prevent cable shafting - Secure any loose cable - Easy to use and Quiet - Option for E-Shift & Brake Shift/Dropper & Brake Shift/Dropper & E-Bike Control
SRAM Stainless Derailleur Cable
$10.99
Stainless steel cables are extruded to provide a smooth low-friction surface.
Jagwire Pro Dropper Post Inner Cable
$11.99
- Replacement cable for the Jagwire Pro Dropper kit - 0.8mm inner cable is more flexible and has lower friction than typical shift inner cables - An easy way to reduce the force required to activate a dropper post remote lever - Perfect for dropper seatposts with "stealth" cable routing and tight housing bends - Includes 2x heat-shrink shims - For use with dropper seatposts ONLY - Length: 2000mm
Jagwire Pro Slick Polished Stainless Brake Cable
$12.99 - $17.49
Slick stainless cables undergo a polishing process to further remove imperfections. This creates a smoother surface with lower friction than PTFE-coated cables. With no coating, these are highly durable and compatible with all performance housings and lubricants. Typically used on high-end bikes, by riders wanting improved performance. Pro Polished cables eliminate the need for flaky coatings with an innovative polishing process to reduce friction and improve performance. - Polished stainless steel construction for low friction - Compatible with all performance housing and lubricants - Cables are tinted gold for easy identification
Jagwire Pro Slick Polished Stainless Shift Cable
$12.99 - $18.99
Slick stainless cables undergo a polishing process to further remove imperfections. This creates a smoother surface with lower friction than PTFE-coated cables. With no coating, these are highly durable and compatible with all performance housings and lubricants. Typically used on high-end bikes, by riders wanting improved performance. Pro Polished cables eliminate the need for flaky coatings with an innovative polishing process to reduce friction and improve performance. - Polished stainless steel construction for low friction - Compatible with all performance housing and lubricants - Cables are tinted gold for easy identification
Jagwire Cable Grips
$14.99 - $16.99
Jagwire's Cable Grips are adapters that make it possible to run hydraulic brake lines on bicycle frames that have housing stops that were designed for regular wire cables and standard housing sections. Once the regular cables and housing sections are removed, the Cable Grips are inserted and tightened in place in the standard frame stops. Then, the hydraulic lines are attached and securely held in place by the gripping jaw(s) of the Cable Grips. - Aluminum model accepts lines up to 5mm in diameter and the lines snap in. - Stainless model grips fully around the lines and is adjustable to fit most diameters.
Jagwire Sport Inline Adjusters
$14.99 - $19.99
Jagwire's Sport Inline Adjusters are installed on your shift cable housing sections so that you can fine-tune the shift cable tension by hand (without tools). They're great for keeping your shifting dialed in. They're precision made of lightweight aluminum and nylon for easy use and durability. To install them, remove the cables and housing sections, cut the top housing sections in two and rejoin the sections with the Inline Adjusters in the middle.
Wheels Manufacturing Spiral Cable Wrap
$14.99
Spiral cable wrap manages those messy cables to achieve a sleek clean look while protecting shifting, braking, and electronic bike cables and hoses.
Jagwire Stick-On Cable Guides (Pack of 4)
$16.99
Jagwire's Stick-On Cable Guides are made of lightweight aluminum with adhesive on the bottom. The aluminum lets them conform to any shaped frame tube and the adhesive holds fast. They come with Jagwire's C-Clips, nylon cable clips that snap onto the guides to hold the cables neatly in place. You get a pack of 4.
Jagwire 1x Sport Shift Kit
$19.99
A great replacement for OE cables and a perfect way to bring style to a bike, the 1x Sport Shift kits make it easy. They come with a weld-cut single-ended Slick Stainless cable for easy installation with modern SRAM and Shimano shifters. The included housing uses our Slick-Lube liners to reduce friction, providing shifting precision and long-lasting performance. This kit is designed for use on bikes with a 1x drivetrain with a rear derailleur or internally geared hub. - Single-ended shift cable is compatible with SRAM and Shimano shift levers for both road or mountain bikes - Sport Slick Stainless cable combines with a Slick-Lube housing liner to offer dependable shifting performance and durability - Includes everything needed for a complete shift cable and housing replacement for a rear derailleur or internally geared hub - OEM-level cables and housing with high-quality small parts
Jagwire Pro Indexed Inline Cable Tension Adjusters
$19.99
Inline adjusters make on-the-fly derailleur cable tension adjustments safe and easy. - 5mm - Stronger detent mechanism for use with brake housing - Perfect for mechanical disc brakes
Shimano Dura-Ace Stainless Derailleur Cable
$19.99
Shimano Stainless Derailleur Cables Cable Head: Shimano/SRAM Cable Type: Stainless Defined Color: Gray Diameter: 1.2mm Double Ended: No Length: 3000 mm Quantity Included: 1
Shimano SP40 Nosed Cap And Raincoat Kit
$19.99
- Wet or muddy condition cable sealing solution - 4/6mm
SRAM SlickWire Shift Cable
$21.00
- For either front or rear shifter - Road & MTB compatible - 1.1 polished stainless steel cable
Kink Linear Brake Cable
$21.99
The Kink Linear brake cable features an outer linear strand housing, which greatly decreases bind when the cable twists during tricks. The inner 1.5mm cable is ground smooth to create an even smoother, drag-free pull. Aluminum ferrules prevent housing failure at both ends, and can easily be refitted after cable trimming. TECH SPECS - Housing: Coated linear strand - Wire: 1.5mm pre-stretched slick wire - Length: 50" - Lug: Traditional cast - Weight: 2.5oz
Shimano Standard Brake Cable Set
$21.99
Shimano Standard Road Brake Cable & Housing Set 2200mm x 5mm housing x 1 2050mm x 1.6mm double ended cable x 1 1000mm x 1.6mm double ended cable x 1 Housing end cap x 4 Cable end crimp x 2
SRAM Slickwire Stainless PTFE Coated Mountain Brake Cable
$22.99
Cables are coated with a durable low-friction polymer. - Dupont Tefzel coating is more durable than previous coated cables - Length: 2350mm - Diameter: 1.6mm - Double Ended: No
Kink Desist Front Brake/Dual Cable Kit
$24.99
Includes 2 replacement knarps for Desist brake set. Use one for front brakes, use both for dual-cable gyro setups.
Jagwire 2x Sport Shift Kit
$25.99
A great replacement for OE cables and a perfect way to bring style to a bike, our 2x Sport Shift kits make it easy. They come with weld-cut single-ended Slick Stainless cables for easy installation with modern SRAM and Shimano shifters. The included housing uses our Slick-Lube liners to reduce friction, providing shifting precision and long-lasting performance. This 2x kit is designed for use on bikes with both front and rear derailleurs. - Single-ended shift cables are compatible with SRAM and Shimano shift levers for both road or mountain bikes - Sport Slick Stainless cables combined with Slick-Lube liners offer dependable shifting performance and durability - Includes everything needed for a complete shift cable and housing replacement for front and rear derailleurs - OEM-level cables and housing with high-quality small parts
Jagwire Pro Dropper Cable Kit
$25.99
Dropper seatposts are quickly becoming standard equipment on mountain bikes across the globe, and for good reason. While most droppers use traditional shift cables and housing, the Jagwire Pro Dropper Kit is the first cable and housing system designed from the ground up to ensure they work as well as possible. The included dropper-specific 0.8mm Pro Polished stainless inner cable interfaces seamlessly with remote levers and actuator arms to provide effortless cable movement. And the innovative FLEX-SL housing is more flexible than standard shift housing, allowing for easier installation with internally-routed seatposts and providing smoother cable movement. With all needed parts included, Pro Dropper Kits are simple to install. - Pro Polished cables combined with improved Slick-Lube housing liners offer enhanced remote lever feel and long-lasting performance - Kits include all the parts and enough housing to install with either internally or externally routed seatposts - Includes heat-shrink shims for use at the cable clamp to ensure compatibility with most cable-actuated seatposts and remote levers - Flexible housing construction improves performance with internal routing and tight housing bends - 0.8mm cable and FLEX-SL housing are for use only with dropper seatposts What's Included: - 1x 1700mm FLEX-SL Dropper Housing - 1x 2000mm Pro Polished Dropper Inner Cable - 2x Sealed Alloy End Caps - 2x Lined Alloy End Caps - 1x Heat-Shrink Shim - 1x Cable Tip - 1x 5G Tube Top - 1x Rotating Hook
SRAM Inline Barrel Adjuster
$27.00
SRAM's Inline Barrel Adjusters are placed on your shift cables near the handlebars so that you can turn the adjusters to fine-tune your shifting. They feature durable and light aluminum/composite construction with rubber covers for easy operation.
Jagwire Universal Sport Brake Cable Kit
$27.99
A great replacement for OE cables and a perfect way to bring style to a bike, our Universal Sport Brake Kits make it easy. They come with double-ended Slick Stainless cables compatible with SRAM and Shimano road and mountain systems. Our new and improved Slick-Lube liners reduce friction, providing improved shifting precision and long-lasting performance. - Double-ended brake cables are compatible with both mountain and road brakes - Sport Slick Stainless cables combined with Slick-Lube housing liners offer dependable braking performance and durability - All parts needed for a complete brake cable/housing install are included - OEM-level cables and housing with high-quality small parts
Jagwire Brake Noodles
$28.99 - $33.99
Jagwire's Brake Noodles feature stainless-steel tubes with aluminum ends for durability and excellent performance. You get 10 of them for all your bicycle setup needs.
Page 1 of 3 Next page