CUBE derailleur hanger #149 (long) Suitable for the following 2018 bikes: Attention Attention SL Acid Race ONE Access WS Race Touring Hybrid ONE/Pro/Exc/SL Town Hybrid Sport Town Hybrid Sport Pro Elly Ride Hybrid Reaction Hybrid Pro/Pro Allroad/Race/Exc Access Hybrid Pro/Pro Allroad/Race SL Road Pro/Race/SL Suitable for the following 2017 bikes: Attention Attention SL Acid 2x Race ONE LTD Pro/Race/SL 2x Access WLS Race/SL Suitable for the following 2016 bikes: Attention Attention SL Acid Race ONE LTD Pro 2x/3x LTD Race 2x LTD SL 2x Access WLS Race/SL Suitable for the following 2015 bikes: Analog 29 Attention 27.5/29 Attention SL 27.5/29 Acid 27.5/29 Race One 27.5/29 LTD Pro/Race/SL 27.5/29 Access WLS Race/SL 27.5/29 Item number: #10149. Successor of the derailleur hanger #123.
Fits most 24" - 29" Bikes Supports Rider up to 250 lbs. Will work on bikes with quick disconnect rear wheels Will work on Coaster or Multi-Speed Bikes Will not work on folding bikes or bikes with rear wheel suspension All installation hardware included With FATWHEELS installed, the rear of bike will measure approximately 37" wide Our brackets are proudly manufactured in the USA from 3/16" steel and coated with a corrosion-resistant finish. All of our FATWHEELS use high quality plastic wheels and are mounted on custom 3/8" axle shafts with heavy-duty bearings. FATWHEELS are specifically designed to provide support and stability to the rider - you won't be disappointed. Rubber insulated wrap clamps protect the frame from scratching as well as bending from over tightening like other systems Exclusive FATCLAMPS wheel mounts allow for precise wheel adjustments unlike other adult stabilizers on the market. Want to review the instructions before your purchase, Click Here!
$3.59 - $5.99
Replacement M5 x 8 Flat Head Screw fastener for derailleur hangers. - Thread: M5-0.8 - Overall Length: 8mm - Material: Steel - Use with 3mm hex wrench - Bag of 5
Replacement M3 x 10 Socket Head Screw fastener for derailleur hangers. - Thread: M3-0.5 - Thread length: 10mm - Use with 2.5mm hex wrench - Bag of 5
Replacement M8 Nut/Bolt Set for Wheels Mfg derailleur hangers. - M8 chainring bolt style fastener - Use with 5mm hex wrench
A traditional saddle clamp for use with vintage, older and inexpensive seatposts without an integrated clamp. - For use only with plain/pin-style seatposts that require a separate saddle clamping mechanism at the top - One bolt tightens the clamp to the rest of the seatpost and to the saddle rails at the same time. - 22.2mm / 7/8 fit with angle adjustment via serrated washers - Steel construction with ED black finish
Shimano Front Derailleur Cable Fixing Assembly
$4.99 - $19.99
Aluminum headset stack spacers precision-cut to ensure proper headset function. - Precision-cut for proper function - Inner Diameter: 28.9mm - Outer Diameter: 34.4mm - Precision-machined aluminum
A new stet of post keys for your RockShox Reverb tightens up any rotational slop that may develop normally with use. - Fits all generations of Reverb and Reverb Stealth - Brass Key sizes are defined by the number of lines on the key. (Zero lines means a "Size 0" key, 3 lines means a "Size 3" key.)
It seems so small and insignificant, yet it's so important. The BB30 Wave Spring Washer is the keystone in your bottom bracket assembly, providing compression for proper setup and bearing preload, while helping to maintain adjustment after it's dialed in just right. They're also quite easy to lose or damage, so grab a few while you're at it.
$6.99 - $24.99
Grade 300 retainer bearings for headset and bottom bracket service. - 10 Retainers/Bag
Shimano Rear Derailleur Cable Anchor Assembly - Fits SLX M7000-10
Shimano Mountain Deore XT M8000 Shift Pod Cable Adjusting Unit
$7.50 - $14.50
- Super light carbon spacers for tuning stem height - Spacers are internally weight relieved to drop a few extra grams
Tight tolerances and precise torque specs mean precision parts like this MegaExo 12 Left Arm Crank Bolt need to be replaced from time to time. Make sure the heart of your drivetrain is secure, and pick up a spare or two today.
22.2mm shim kit to mount control levers. Slater bars are 19mm diameter. The shim kit allows for standard 22.2mm brake, shift and dropper post levers to be used.
Brake Pad Spreader Springs - Available for Guide Ultimate and Guide X0 brakes
Replacement M6 Short Nut/Bolt Set for Wheels Mfg. derailleur hangers. - Custom M6 short chainring bolt style fastener - Use with 4mm hex wrench - Length of bolt: 6.4mm under head - Length of Nut: 3.5mm (under head), 5.2mm (overall)
$8.49 - $37.99
Flat Mount Disc Caliper Bracket Bolts
TT Brake Lever Hardware Kit
Zipp Speed Weaponry Vuka Extension End Plugs - Plastic bar end plug pair for 22.2mm extensions
Forged Alloy seat-clamp.
Lightweight alloy lever. - Strong Cro-mo axle
This is a MegaExo Left Crank Bolt for 19mm MegaExo Cranks. - M12 bolt
We won't blame you for attention to detail. In fact, Spank's got your back. These headset spacer kits are available in 8 popular colors, and come with 3 rings in incremental sizes, to make your next cockpit set up a thing of ease and beauty. - Material: Alloy - Sizes (mm): 3 / 6 / 12 - Diameter: 1 1/8" (28.6mm) - Finish: Brushed Anodized
Bolts, clamps and washers for Thomson Seatposts and Seat Clamps. - Sold individually, includes bolt, washer and nut
End-plugs with opening for cable pass-through for aerobar extensions.
$9.99 - $10.99
Fun handlebar-mount streamers. - Quick and easy installation
Keep the cable fixed securely in your Dura-Ace R9100 rear derailleur with this Shimano Rear Derailleur Cable Anchor Assembly
$9.99 - $14.99
Carbon fiber headset stack spacers, precision-cut to ensure proper headset function. - Compatible with all threadless and threaded headsets
Page 1 of 18 Next page