Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts & Accessories

Wheels Manufacturing Inc. Outer Axle Nut
$1.99 - $10.99
Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels. - 14mm x 1mm (1411-AN) sold in pairs - All others sold individually
Stan's NoTubes Presta Removeable Valve Core
$3.29
Stan's No Tubes' Presta Removable Valve Core is a replacement valve core for Stan's No Tubes Presta valve stems and Presta valve equipped rim strips.
Shimano Alfine SG-S700 Right Hand Dust Cap D
$3.99
Don't let a bent or worn dust cap sully an otherwise well-functioning Shimano Alfine internally geared hub. Get a spare and replace as necessary for continued performance and to preserve the longevity that you expect from Alfine.
Schwalbe High Pressure Rim Tape
$4.49
Schwalbe High Pressure Rim Tape effectively protects the tube against mechanical damage. - Elastic for ease of installation - High pressure: 8 bar / 116 psi
Shimano Alfine SG-S700 Left Hub Seal Ring
$4.99
Keeping that well-functioning Shimano Alfine internally geared hub in top working condition means keeping the internals clean. Replace the left hub seal ring when necessary for continued performance and to preserve the longevity that you expect from Alfine.
Shimano Alfine SG-S700 Right Lock Washer Seal
$7.49
Do you need to replace the right lock washer seal on your Alfine SG-S700 internally geared hub? If you're not sure, it might not be a bad idea, as contamination from damaged or worn seals is the kryptonite of virtually maintenance-free internally geared hubs.
Shimano Alfine SG-S700 Oil Port Bolt
$8.99
Keeping contamination out of your internally geared hub is critical to its function and longevity. Sometimes, the oil port bolt comes loose and it's easy to lose, even if you've just taken it out to oil your hub. Keep a spare or two so your hub stays clean inside and it'll last you many, many miles.
Zipp Disc Wheel Valve Cover Patches
$8.99
A simple solution for completing the Zipp aerodynamic package by covering the valve access hole on most disc wheels. Black, self-adhesive oval patches with the Z logo, in a package of five.
49°N Spoke Ornaments
$9.99
Pack of 30 ornaments. - 5 different colors - Fits all standard spoke diameters
Velox Jantex Adhesive Tubular Rim Tape
$10.50
- High performance adhesive tape, a great pairing with Velox Cement - Each roll is usually adequate for gluing two tubular tires - Protects tube from spoke/nipple/rim puncture
Spank HEX Rear Hub HG/HGR Replacement Seal Kit
$10.99
HEX Rear Hub HG/HGR Replacement Seal Kit
Vittoria Special Rim Tape
$10.99
This lightweight, high-pressure rim tape offers great protection against spoke hole flats and is easy to install. This Italian-made tape is light and thin, so it will not inhibit tire fitting. Nylon elastic material is used to ensure a snug fit without movement.
Shimano Alfine SG-S700 Right Hand Cone
$12.49
New cones make hubs spin like silk. Take advantage of your Shimano Alfine hub's highly serviceable design, and replace the bearing cones if they are worn or damaged. This one is specifically for the right side.
Spank Oozy/Spike Rear Hub 3 Pawl & Spring Kit
$12.99
Replacement Pawls for all Oozy hubs.
Wheels Manufacturing Inc. CN-R098 Cone
$12.99
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Rear 10mm x 1 axle - Shimano Right Rear Cone - Cone Wrench Size: 15mm - Threads: 10mm x 1 - Diameter: 17.0mm - Length: 9.0mm - 1 cone per bag COMPATIBLE HUBS: - XT M750, 9-spd Rear - XT M760, 9-spd Rear - XT M765, 9-spd Rear - Deore LX M570, 9-spd Rear
Wheels Manufacturing Inc. CN-R040 Cone
$13.99
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Front 9mm x 1 axle - Cone Wrench Size: 13mm - Threads: 9mm x 1 - Diameter: 14.8mm - Length: 10.6mm - 1 cone per bag - Note: O-ring / seal not included. COMPATIBLE HUBS: - Shimano HB-C201 Front - 105 HB-1050 Front - Deore LX/Mtn LX Front - STX HB-MC32/30 Front - Shimano HB-A410, HB-A416 Front
Wheels Manufacturing Inc. CN-R002 Cone
$14.99
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Rear 10mm x 1 axle - Rear Left Cone - Cone Wrench Size: 15mm - Threads: 10mm x 1 - Diameter: 16.9mm - Length: 15mm - 1 cone per bag - Note: O-ring / seal not included. Check the seal groove closely. This cone has a wider groove than cone CN-R024. COMPATIBLE HUBS: - Ultegra 6401 7-speed Rear - Ultegra 6402 8-speed Rear - 105 SC 1055 8-speed Rear - 105 SC 1056 7-speed Rear - XT-II M732 7-speed Rear
Wheels Manufacturing Inc. CN-R081 Cone
$14.99
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: Joytech, Joy U, KK 10mm x 1, rear - Compatible with 10mm x 1 axle - Cone Wrench Size: 15mm - Threads: 10mm x 1 - Diameter: 17.0mm - Length: 13.8mm - 1 cone per bag COMPATIBLE HUBS: - Joytech, Joy U, KK 10mm x 1, rear - Taiwanese rear hubs with 10mm x 1 axle
Wheels Manufacturing Inc. CN-R082 Cone
$14.99
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: Sovos 9mm x 1, front hub - Compatible with 9mm x 1 axle - Cone Wrench Size: 13mm - Threads: 9mm x 1 - Diameter: 15.0mm - Length: 12.8mm - 1 cone per bag COMPATIBLE HUBS: - Sovos 9mm x 1, front hub - Taiwanese and similar front hubs with 9mm x 1 axle
Wheels Manufacturing Inc. CN-R083 Cone
$14.99
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: JoyTech, Joy U, KK 9mm x 1, front hub - Compatible with 9mm x 1 axle - Cone Wrench Size: 15mm - Threads: 9mm x 1 - Diameter: 15.0mm - Length: 12.8mm - 1 cone per bag - Note: O-ring / seal not included. COMPATIBLE HUBS: - JoyTech, Joy U, KK 9mm x 1, front hub - Taiwanese front hubs with 9mm x 1 axle
Wheels Manufacturing Inc. CN-R084 Cone
$14.99
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: Joytech 9mm x 26, front hub - Compatible with 9mm x 26 axle - Cone Wrench Size: 13mm - Threads: 9mm x 26 - Diameter: 15.0mm - Length: 12.8mm - 1 cone per bag - Note: O-ring / seal not included. COMPATIBLE HUBS: - Joytech 9mm x 26, front hub - Taiwanese hubs with 9mm x 26 axle - 105 SC 1055 8-speed Rear - 105 SC 1056 7-speed Rear - XT-II M732 7-speed Rear
Wheels Manufacturing Inc. CN-R086 Cone
$14.99
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: JoyTech 9mm x 1, front "parallax" style hub - Compatible with 9mm x 1 axle - Cone Wrench Size: 13mm - Threads: 9mm x 1 - Diameter: 15.0mm - Length: 11.0mm - 1 cone per bag COMPATIBLE HUBS: - JoyTech 9mm x 1, front "parallax" style hub - Taiwanese hubs with 9mm x 1 axle
Wheels Manufacturing Inc. CN-R088 Cone
$14.99
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: JoyTech, Sovos, KK, KT 9.5mm x 26tpi - Compatible with 9.5mm x 26tpi axle - Cone Wrench Size: 13mm - Threads: 9.5mm x 26 - Diameter: 15.0mm - Length: 12.8mm - 1 cone per bag COMPATIBLE HUBS: - JoyTech, Sovos, KK, KT 9.5mm x 26tpi - Taiwanese hubs with 9.5mm x 26tpi axle
49°N Clamper Release Skewers
$15.99
A simplified quick release, utilizing an exposed/external split cam that straddles the end of the skewer. - Lighter and both easier and less expensive to manufacture, these external cam quick release levers represent an excellent value - Fits both road and mountain bike frames & forks with 100/130/135mm hub spacing - Construction: Chromoly steel skewer with alloy cam/lever and plastic/steel acorn-nut - Sold as a front & rear matching pair - Lengths: 133mm (FR) / 169mm (RR) - Weight: 58g (FR) / 64g (RR)
DT Swiss Narrow Base Tubeless Valve
$16.47
Tubeless valves for DT Swiss rims for repair or replacement.
Spank Spoon Pedal Bearing/Bushing Kit
$16.99
Replacement bearings and bushings specific to Spoon 90 (Small) and 100/110 (Medium and Large) pedals. Eliminates play that can develop over time, and revives performance. Includes: - Sealed Bearing x2pcs - 10mm IGUS Bushing x2pcs - Green Friction Seal x2pcs - Locknut - O-ring x 2pcs
DT Swiss Pro Head Brass Nipples
$19.99 - $31.99
Developed for short spokes with a large deflection angle. DT Pro Head nipples are designed for short spokes with a large angle of deflection, such as for e-bike use. Through the spherical contact surface, the nipple aligns automatically with the angle of the spoke, which leads to consistent power transmission. Note: brass nipples are not approved for children's products in the USA. See attached warning! All-brass nipples are recommended for e-bike use. - Weight: starting at 59g for 64 nipples.
Shimano Alfine SG-S700 Left Hand Cone with Dust Cap
$19.99
If the bearings are getting rough on your Shimano Internally Geared hub, it could simply be a matter of replacing a pitted cone and repacking the bearing with grease. - Fits left side of Alfine SG-S700 hubs
Muc-Off No Puncture Hassle Tubeless Sealant
$21.99
Looking for a super lightweight but badass tubeless sealant? Boom, you've just found it my friend! No Puncture Hassle performs under the most brutal race conditions. The cutting-edge microfiber molecules fill the bigger holes and tears, whilst the advanced latex forms a strong seal instantly. The formula also contains a unique UV detection system that highlights any punctures you haven’t seen during your ride. Developed with the world's top downhillers and pro peloton teams, to give you the finest tire sealant available. It's non-corrosive and easily washes off with water. Compatible with tubeless ready and full UST wheels/tires, No Puncture Hassle works from 15psi-120psi and temperatures from -20°C to +50°C. Our pouch is designed to fit your Presta valve perfectly and is ideal to add to your toolkit or ride pack for emergency top ups on the go! - For Downhill, Enduro and Road tires - Seals tears and holes up to 6mm - Contains UV puncture detection - Won't dry out or ball - Works from 15psi-120psi and temperatures from -20°C to +50°C - Biodegradable
Shimano Alfine S700 Small Parts Kit
$21.99
Add an Alfine hub, cog, spokes, and a rim to this Shimano Internally Geared Hub Small Parts Kit, and you're ready to rock. - Alfine hubs are packaged without small parts and require this kit plus a cog - Nexus hubs are packaged with small parts and cogs and do not require an additional small parts kit - For 11-Speed Hub - Includes CJ-S700 Cassette Joint for Vertical Dropouts *Cassette joint does not fit Di2 Alfine hubs
Shimano 105 5800 Rear Hub Left Cone and Lock Nut Unit
$22.49
-Replacement left side cone and locknut for Shimano 105 FH-5800 rear hub
Spank Spike DH Rear Hub 150/157mm Steel Axle Shaft
$22.99
Replacement Steel Axle Shaft for SPIKE DH R150 Rear Hubs. Compatible with 12x150mm hubs and those already converted to 12x157mm. - Material : Steel - Weight (g): ±81 - Compatibility: SPIKE DH 12x150mm / 12x157mm (converted) Rear Hubs
Stan's NoTubes Rim Tape
$23.99 - $39.99
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3
49°N Replacement Freehub Body for Quick Release Hubs
$24.99
Replacement freehub body for all loose-ball 49N 10mm Quick-Release rear hubs. - 11sp Road compatible freehub body with supplied 1.85mm spacer for full 8/9/10/11sp road & mountain compatibility - Requires axle removal to fit - Weight: 160g
DT Swiss Pro Head Spoke Reinforcement Washers for SPLINE One
$24.99
Pro Head Reinforcement System (PHR) has a larger and more spherical contact area and is designed to balance loads transferred to the rim. The PHR system acts as a ball and socket interface, allowing the spoke to pivot into alignment while maintaining even, consistent contact during installation in order to follow the perfect trajectory from the hub to the rim.
DT Swiss Standard Aluminum Nipples
$24.99 - $66.99
The buyer's choice for wheel builders looking to save weight. The nipples are available with or without DT Pro Lock, a patented liquid inside the nipple thread that makes the connection between the nipple and spoke extremely durable. It pairs perfectly with any wheel, though all-brass nipples are recommended for e-bike use. - Weight: starting at 20g for 64 nipples
Roval Tubeless Valves
$24.99
Roval's rim-specific Tubeless Valves are designed to match Specialized's rim profiles and provide a better seal than previous generation valves. - Constructed of lightweight aluminum - Removable valve core - Mated with a seal which is specific to different rim models: - MY14 Control SL = black rim bed shaped seal - MY15 Control Carbon/Aluminum = red rim shaped seal - MY15 Traverse SL/Aluminum = black O-ring seal
SRAM X0 Hub Conversion Caps
$24.99 - $26.00
SRAM's X0 conversion caps are the ticket for converting your X0 hubs to a different axle type.
Stan's NoTubes Tubeless Valve Stems
$24.99
Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.
WTB TCS Brass 34mm Valve Stems
$24.99
WTB's TCS Brass Valves are your key to the excellence that is tubeless wheels and tires. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch.
WTB TCS Brass 46mm Valve Stems
$24.99
WTB's TCS Brass Valves are your key to the excellence that is tubeless wheels and tires. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch.
49°N Vise Quick Release Skewers
$25.99
A modern take on the classic internal/enclosed cam design as invented by the late, great Tullio Campagnolo. - Internal cam design exerts a far greater vise-like grip vs. external/exposed cam QR lever designs for a more secure fit - Fits both road and mountain bike frames & forks with 100/130/135mm hub spacing - Construction: Chromoly steel skewer with alloy lever and plastic/steel body & acorn-nut - Sold as a front & rear matching pair - Lengths: 133mm (FR) / 169mm (RR) - Weight: 57g (FR) / 61g (RR)
Zipp 77/177 Disc Conversion Caps
$25.99
Wheel Conversion Caps for Zipp 77/177 Disc hubs. Converts your Zipp 77 or 177 hubs to nearly any frame standard.
Wheels Manufacturing Inc. Freewheel/BB Spacer
$26.99
Machined aluminum spacers for freehubs. Great for fine tuning freewheel and cassette placement or improving chainline. Also good for bottom bracket spacing with BSA BB cups. - Inner Diameter: 35.0mm - Outer Diameter: 40.7mm - Material: Aluminum - Finish: Polished - Bags of 10
Stan's NoTubes Neo Replacement Rear Axle
$27.26 - $29.99
Replacement rear axle for Neo and Neo Ultimate hubs. High-precision center-less ground treatment ensures perfect bearing fit.
Kink Universal Freecoaster Guard
$27.50
The Kink Universal Freecoaster Guard is designed to fit with most modern freecoaster hubs. It features a threaded chromoly core that replaces the hubs existing cone nut(s) and also includes a spacing washer for hubs using a wider cone. The nylon guard itself fits over the chromoly core and is injection-molded from ultra-durable nylon material. This guard fits on the non-drive side only.
Spank HEX Boost Rear Hub Alloy Axle Shaft
$27.99
Replacement Alloy Axle Shaft for HEX J-Type and Straightpull Boost 148/141mm Rear Hubs. Compatible with: - HEX J-Type 32H and Straightpull Boost 148mm rear wheels Not compatible with: - Non-Boost HEX rear wheels - SPIKE/OOZY/SPOON hubs
Spank HEX Drive Freehub Pawl Service Kit
$27.99
Replacement XD/XDR/HG/HGR freehub Pawls & Springs & Pawl Cap - Compatibility: HEX Drive XD/XDR/HG/HGR freehubs - 6x pawls, 6x spring, and 1x Pawl cap for service
Spank HEX Rear Hub 150/157mm Alloy Axle Shaft
$27.99
Replacement Alloy Axle Shaft for HEX J-Type 150/157mm Rear Hubs. Compatible with: - HEX J-Type 150/157 rear wheels Not compatible with: - Boost or 135/142 rear wheels - SPIKE/OOZY/SPOON hubs
Shimano Alfine S7000 Cassette Joint Unit
$29.99
Shimano Nexus and Alfine Internally Geared Hub Cassette Joints - Shimano model # CJ-S7000 - Does not include cable fixing bolt unit - OEM cassette joint unit for Alfine SG-S7000-8
Spank HEX 28 Front Hub 12x100 Adapter
$29.99
Replacement 12x100 Adapters for HEX 28 Gravel Front Hubs. Compatible with: - HEX Gravel J-Type Front Wheels Not compatible with: - HEX Straightpull or HEX J-Type 32H Front Wheels - Boost front wheels - SPIKE/OOZY/SPOON hubs - HEX 32 J-Type or 28 Straightpull Front Hubs.
Spank HEX 28 Front Hub 15x100/110 Adapter
$29.99
Adapts HEX 28 Gravel Front Hubs to 15x100. Compatible with: - HEX Gravel J-Type Front Wheels - Compatible with HEX Straightpull 28H Front Wheels - Also compatible as replacement 15x110 adapters for HEX 28 Straightpull Boost Front Hubs. Not compatible with: - HEX 32 J-type Front Hubs - HEX J-Type 32H Front Wheels - SPIKE/OOZY/SPOON hubs
Spank HEX 28 Front Hub QRx100 Adapter
$29.99
Adapts HEX 28 Gravel Front Hubs to QRx100. Compatible with: - HEX Gravel J-Type Front Wheels Not compatible with: - HEX Straightpull or HEX J-Type 32H Front Wheels - Boost front wheels - SPIKE/OOZY/SPOON hubs - HEX 28 Straightpull or HEX 32 J-Type Front Hubs.
Spank HEX 32 Boost Front Hub Boost 20x110 Adapter
$29.99
Adapts HEX 32 J-Type Boost Front Hubs to Boost 20x110. Not compatible with Non-Boost hubs. Not compatible with HEX 28 Straightpull or Gravel Front hubs. Compatible with: - HEX J-Type 32H Boost Front Wheels Not Compatible With: - HEX Straightpull or Gravel Front Wheels (see HEX 28 front hub adapters) - SPIKE/OOZY/SPOON hubs
Spank HEX 32 Front Hub 12x100 Adapter
$29.99
Adapts HEX 32 J-Type F15/20 Front Hubs to 12x100. Compatible with: - HEX J-Type 32H non-Boost Front Wheels Not compatible with: - HEX 28 Straightpull or HEX Gravel Front Hubs - HEX Straightpull or Gravel Front Wheels. (see HEX 28 front hub adapters) - SPIKE/OOZY/SPOON hubs
Spank HEX 32 Front Hub 15x100/110 Adapter
$29.99
Adapts HEX 32 J-Type Front Hubs to 15x100. Compatible with: - HEX J-Type 32H Boost and non-Boost Front Wheels - Also compatible as replacement 15x110 adapters for HEX 32 J-Type Boost Front Hubs. Not compatible with: - HEX 28 Straightpull or HEX Gravel Front Hubs - HEX Straightpull or Gravel Front Wheels. (see HEX 28 front hub adapters) - SPIKE/OOZY/SPOON hubs
Spank HEX 32 Front Hub 20x110 Adapter
$29.99
Adapts HEX 32 J-Type F15/20 Front Hubs to 20x110. Compatible with: - HEX J-Type 32H non-Boost Front Wheels Not compatible with: - HEX 32 J-Type Boost Front Hubs - HEX 28 Straightpull or HEX Gravel Front Hubs. - HEX Straightpull or Gravel Front Wheels. (see HEX 28 front hub adapters) - SPIKE/OOZY/SPOON hubs
Spank HEX 32 Front Hub QRx100 Adapter
$29.99
Adapts HEX 32 J-Type F15/20 Front Hubs to QRx100. Compatible with: - HEX J-Type 32H non-Boost Front Wheels Not compatible with: - SPIKE/OOZY/SPOON hubs - HEX Straightpull or Gravel Front Wheels (see HEX 28 front hub adapters) - HEX 28 Straightpull or HEX Gravel Front Hubs
Spank HEX Rear Hub 10x135 Adapter
$29.99
- Adapts HEX J-Type 135/142 and Gravel Rear Hubs to 10x135. Compatible with: - Compatible with HEX J-Type 135/142 and Gravel Rear Wheels - XD and HG Freehub Bodies Not compatible with: - HEX Straightpull Boost or J-Type Boost Rear Wheels - HEX J-Type 150/157 Rear Wheels - SPIKE/OOZY/SPOON hubs
Spank HEX Rear Hub 12x135/150 Adapter
$29.99
- Adapts HEX J-Type 135/142 and Gravel Rear Hubs to 12x135mm. - Adapts HEX J-Type 150/157 Rear Hubs to 12x150mm. Compatible with: - HEX J-Type 135/142, and 150/157 Rear Wheels - HEX Gravel Rear Wheels - XD and HG Freehub Bodies Not compatible with: - HEX Straightpull Boost Rear Wheels - SPIKE/OOZY/SPOON hubs
Page 1 of 3 Next page
Live chat by BoldChat